N80 Steel - Articles - Scientific Research Publishing

Design and Analysis of MEMS Based Aluminum Nitride (AlN), Lithium Niobate (LiNbO₃) and Zinc Oxide (ZnO) Cantilever with Different Substrate Materials for Piezoelectric Vibration Energy Harvesters Using COMSOL Multiphysics Software (Articles)

Ahmad M. Alsaad, Ahmad A. Ahmad, Qais M. Al-Bataineh, Nermeen S. Daoud, Mais H. Khazaleh

Open Journal of Applied Sciences Vol.9 No.4，April 19, 2019

DOI: 10.4236/ojapps.2019.94016 1,326 Downloads 3,600 Views Citations
A Three-Dimensional Numerical Model for Predicting the Weld Bead Geometry Characteristics in Laser Overlap Welding of Low Carbon Galvanized Steel (Articles)

Kamel Oussaid, Abderrazak El Ouafi

Journal of Applied Mathematics and Physics Vol.7 No.10，October 8, 2019

DOI: 10.4236/jamp.2019.710149 1,049 Downloads 2,864 Views Citations
This article belongs to the Special Issue on Application of Mathematical Models in Physics and Engineering
Experimental Investigation of Laser Surface Hardening of AISI 4340 Steel Using Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

J. of Minerals and Materials Characterization and Eng. Vol.8 No.2，March 10, 2020

DOI: 10.4236/jmmce.2020.82002 585 Downloads 2,097 Views Citations
Performance-Based Design through Implementation of FEMA P-58 Methodology in Developing Countries (Articles)

Amir Masoumi Verki, Seyed Bahram Beheshti Aval

Open Journal of Earthquake Research Vol.9 No.3，April 13, 2020

DOI: 10.4236/ojer.2020.93015 1,023 Downloads 3,129 Views Citations
Numerical Investigation of Laser Surface Hardening of AISI 4340 Using 3D FEM Model for Thermal Analysis of Different Laser Scanning Patterns (Articles)

Baha Tarchoun, Abderrazak El Ouafi, Ahmed Chebak

Modeling and Numerical Simulation of Material Science Vol.10 No.3，July 17, 2020

DOI: 10.4236/mnsms.2020.103003 613 Downloads 1,565 Views Citations
Investigation of Working Bodies of the Device for Separation of Fibers Suitable for Spinning from Cotton Waste (Articles)

Avazbek Obidov, Mirzaolim Sultonov

Engineering Vol.12 No.12，December 30, 2020

DOI: 10.4236/eng.2020.1212063 644 Downloads 1,158 Views Citations
Determination of the Friction Coefficient in the Flat Strip Drawing Test (Articles)

Anvar Makhkamov

Engineering Vol.13 No.11，November 29, 2021

DOI: 10.4236/eng.2021.1311043 265 Downloads 1,496 Views Citations
Laser Beam Welding of 600 MPa Quenched and Tempered High-Strength Steel (Articles)

Pritchard Elmon Marozva, Bruno Roberts Mose, Abdel-Monem El-Batahgy, Thomas Ochuku Mbuya

World Journal of Engineering and Technology Vol.10 No.2，May 11, 2022

DOI: 10.4236/wjet.2022.102015 222 Downloads 1,139 Views Citations
Structural Analysis of a RC Shear Wall by Use of a Truss Model (Articles)

Panagis G. Papadopoulos, Periklis E. Lamprou

Open Journal of Civil Engineering Vol.12 No.3，August 17, 2022

DOI: 10.4236/ojce.2022.123019 301 Downloads 1,373 Views Citations
Determination of Technological Parameters of Fiber Separation Device from Cotton Waste (Articles)

Sultanov Mirzaolim Mirzaraxmatovich

Engineering Vol.14 No.11，November 29, 2022

DOI: 10.4236/eng.2022.1411038 116 Downloads 509 Views Citations
Parameter Optimization of Amalgamated Al₂O₃-40% TiO₂ Atmospheric Plasma Spray Coating on SS304 Substrate Using TLBO Algorithm (Articles)

Thankam Sreekumar Rajesh, Ravipudi Venkata Rao

J. of Surface Engineered Materials and Advanced Technology Vol.6 No.3，June 28, 2016

DOI: 10.4236/jsemat.2016.63009 2,537 Downloads 4,002 Views Citations

<...17 1819>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

All	Title	Abstract	Keywords
DOI	Author	Journal	Affiliation
ISSN	Subject

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies