Prof. Aidy Ali

National Defence University of Malaysia (UPNM), Malaysia

Associate Professor

Email: aidyali@upnm.edu.my

Qualifications

1. Aidy Ali, A. K. Arifin, S. M. Sapuan, M. H. Yunin, Analisis Retak Elastik-Plastik Dengan Kaedah Unsur Terhingga Kes Bebanan Mod Bergabung, Journal of Industrial Technology, Vol 13 No. 1, 2004, p:53-67 (ISSN 0128-4940).
2. Aidy Ali, A. K. Arifin, M. R. M. Zin, S. M. Sapuan, M. H. Yunin, M. R. Osman, Elastic Plastic Crack Analysis By Finite Element Method Under Mixed Mode Loading Conditions, Suranaree Journal of Science and Technology, Vol 11 No. 2, 2004, p:91-96.
3. Aidy Ali, M. W. Brown, C. A. Rodopoulos, S. Gardiner. Characterization of Friction Stir Welding 2024-T351 AL Alloy, Journal of Failure Analysis and Prevention, ASM International. Volume 6 (4) August 2006, pp: 83-96(14). (Scopus).
4. Aidy Ali, X. An, C. A. Rodopoulos, M. W. Brown, P. O'Hara, A. Levers d and S. Gardiner, The Effect of Controlled Shot Peening on the Fatigue Behaviour of 2024-T3 AluminiumFriction Stir Welds - International Journal of Fatigue, Vol 29, 2007 , p:1531-1545. Impact Factor: 1.56 (Thomson ISI).
5. Aidy Ali, Ting Wei Yao, Nuraini Abdul Aziz, Mhd. Yunin Hassan, Barkawi Sahari, Simulation and experimental work of single lap bolted joint tested in bending, Suranaree Journal of Science and Technology, Vol 14 No. 4, 2007, p:331-345.
6. Aidy Ali, Mike W. Brown, C. A Rodopoulous. Modelling of crack coalescence in 2024-T351 Al alloy friction stir welded joints.International Journal of Fatigue, Vol 30, 2008, p:2030-2043. Impact Factor: 1.56 (Thomson ISI).
7. Aidy Ali, Tinia Idaty Mohd. Ghazi, Mehdi Zadeh Mohammadi. Constant Cyclic Loading Fatigue Crack Growth Modelling.International Review of Mechanical Engineering .Vol 2, N 4, July 2008. p:550-560 (Scopus).
8. Aidy Ali and Omar Suliman Zaroog, Characterisation and Fatigue of friction stir welding. Suranaree Journal of Science and Technology Vol 15 No. 2, 2008, p:95-106.
9. Aidy Ali, Mike W. Brown, and Omar Suliman Zaroog ,Fatigue Damage of 2024-T351 Aluminium Alloy Friction Stir Welding Joints. Part 1: Characterisation. Suranaree Journal of Science and Technology Vol 15 No. 2, 2008, p:107-116.
10. Farzad Tahriri, Mohd. Rasid Osman, Aidy Ali, A review of supplier selection methods in manufacturing industries, Suranaree Journal of Science and Technology Vol 15 No. 3, 2008, p:201-208.
11. Aidy Ali, Mike W. Brown, and Omar Suliman Zaroog ,Fatigue Damage of 2024-T351 Aluminium Alloy Friction Stir Welding Joints. Part 2: Fatigue Damage. Suranaree Journal of Science and Technology Vol 15 No. 4, 2008, p:261-270.
12. A. F. Golestaneh ,Aidy Ali, W. S. V. Wong, F. Mustapha, M. Z. Mohammadi. Simulation of fatigue crack growth in friction stir welded joints in 2024-T351 al alloy. Suranaree Journal of Science and Technology Vol 15 No. 4, 2008, p:271-286.
13. Tinia Idaty Mohd. Ghazi, E. Soon How, Aidy Ali and S. M. Sapuan .Wastewater Treatment Using Photochemical Oxidation .International Journal of Chemical Sciences Vol 6 No. 3, p:1241-1265, 2008. (Chemical Abstract).
14. Farzad Tahriri, M. Rasid Osman, Aidy Ali, Rosnah Mohd. Yusoff, Alireza Esfandiary, AHP approach for supplier evaluation and selection in a steel manufacturing company . Journal of Industrial Engineering and Management Vol 1 No. 2, p:54-76. 2008 (Scopus).
15. A. F. Golestaneh, Aidy Ali, S. V. Wong, F. Mustapha. M. Zadeh. Computational investigations of crack behavior in friction stir welding. Simulation: Transactions of The Society for Modeling and Simulation International. Vol 85 No. 1, p:45-59. 2009. Impact Factor: 0.783 (Thomson ISI).
16. M. Bayat, B. B. Sahari, M. Saleem, Aidy Aliand S. V. Wong . Thermoelastic Solution of a Functionally Graded Rotating Disk with Variable Thickness and bending Based on the First Order Shear Deformation Theory. Journal Thin Wall and Structure Vol 47 No. 5, p:568-582, 2009.Impact Factor: 0.85. (Thomson ISI).
17. A. F. Golestaneh ,Aidy Ali, M. Z. Mohammadi . Modelling the fatigue crack growth in friction stir welded joint of 2024-T351 al alloy Materials and Design  2009. Vol 30 p 2928-2937. Impact Factor: 1.107 (Thomson ISI).
18. A. F. Golestaneh ,Aidy Ali. Application of numerical method to investigation of fatigue crack behavior through the friction stir welding. Journal of Failure Analysis and Prevention, ASM International. Volume 9 (2) April 2009, pp: 147-158. (Scopus).
19. Reza Afshar, Aidy Ali, B. B. Sahari. Auto generation of center of gravity of tubular structure during crush deformation .International Journal of Computational Methods. Volume 6 (2) June. 2009. pp. 333-348. Impact Factor: 0.89 (Thomson ISI).