[1]
|
L. R. Higgins, “Maintenance engineering handbook,” McGraw-Hill Book Company, New York, USA, pp. 22– 35, 1995.
|
[2]
|
E. A. Ogbonnaya, “Condition monitoring of a diesel engine for electricity generation,” M. Tech. Thesis, Department of Marine Engineering, Rivers State University of Science and Technology, Port Harcourt, Nigeria, p. 68, 1998.
|
[3]
|
L. R. Contreras, C. Modi, and A. Pennathur, “Integrating simulation modelling and equipment condition diagnostics for predictive maintenance strategies–A case study,” Proceedings of the 2002 Winter Simulation Conference, University of Texas, El Paso, USA, pp. 1–7, 2002.
|
[4]
|
M, Salva, R. Hernandez, and C. Sanz, “Proposed of a method for implementing infrared-scanning inspection programs in merchant vessels,” Marine Technology and Sname News, Vol. 41, No. 1, pp. 1–6, 2004.
|
[5]
|
J. M.Moubray, “Maintenance management: A new paradigm, strategic technologies,” Inc., Aladon Ltd, UK, pp. 7 –11, 2000. [Online] Available: http://www.maintenanceresources.com/RCM/Maintparadigm, July 29, 2006.
|
[6]
|
A. Veltkamp, “Vibration introduction course: SKF condition monitoring, in computerized maintenance management system and enterprise resource planning,” Nigerian Society of Engineers, Lagos, Nigeria, pp. 1.1–4.5, 2001.
|
[7]
|
S. Jeff, PDM, “Secrets revealed: How to improve your PDM program or start one from scratch,” 1st Edition, Allied Reliability, Inc., Tulsa, Oklohoma, [Online] Available: http://www.alliedreliability.com, pp. 4–35, June 6, 2006.
|
[8]
|
E. A. Ogbonnaya, “Modelling vibration-Basic faults in rotor shafts of a gas turbine,” PhD Thesis, Department of Marine Engineering, Rivers State University of Science and Technology, Port Harcourt, Nigeria, p. 251, 2004.
|
[9]
|
B. E. Okah-Avae, “The science of industrial machinery and systems maintenance,” Spectrum Books Ltd, Lagos, Nigeria, pp. 19–105, 1996.
|
[10]
|
W. P. P. Ralph, “Maintenance management and control,” in Handbook of Industrial Engineering: Technology and Operations Management, 3rd Ed., Inc. New York, USA, pp. 1611–1615, 2001.
|
[11]
|
IRD Mechanalysis, “Vibration monitoring and analysis handbook,” IRD Mechanalysis, Inc., Columbus, USA, pp. 1.7–5.7, 1993.
|
[12]
|
J. T. Broch, “Mechanical vibration and shock measurement,” 2nd Ed., K. Larsen & Son A/S, Denmark, pp. 197– 199, 1980.
|
[13]
|
K. A. Oladejo and A. O. Oke, “Condition monitoring of a centrifugal pump,” in Pump Maintenance, Arcedem Se- minar Paper, Ibadan, Nigeria, pp. 6–10, 2005.
|
[14]
|
E. P. Agbese and A. Mohammed, “Artificial neural network and their applications,” Proceedings of First National Conference of the Department of Mechanical Engineering on Manufacturing Technology and Engineering in a Developing Economy, University of Uyo, Nigeria, May 2–3, pp 51–55, 2001.
|
[15]
|
J. S. Carlton, C. G. Holland, M. J. Newbury, D. Rhoden, and D. A. Triner, “Recent operational experience and research relating to marine machinery condition monitoring,” Trans IMarE, Vol. 109, No. 1, pp. 75–95, 1997.
|
[16]
|
E. A. Ogbonnaya, K. D. H. Bob-Mannual, I. E. Douglas, and H. I. Hart, “Application of artificial neural networks to gas turbine rotor shaft faults diagnosis,” Journal of Science and Technology Research, Vol. 3, No. 1, pp. 12–15, 2004.
|
[17]
|
K. Farhad, A. P. Mehmet, and M. Ehsan, “A new generation motion-control system for twin-hull vessels using a neural optimal controller,” Marine Technology and Sname News, Vol. 40, No. 3, pp. 168–180, 2003.
|