The Research of Heat Transfer Area for 55/19 Steam Generator ()
Abstract
A calculation method of heat transfer area
for vertical natural circulated steam generator was introduced. According to
the design requirements of steam generator 55/19 of CPR1000, its heat transfer
area was calculated based on this method. The results show that the accuracy of
partitional and overall calculation method is almost the same, but the result
is different when using different calculation models. And the results are
compared with the foreign companies for 55/19 steam generator.
Share and Cite:
Zhao, Q. , Deng, D. , Nie, S. , Chen, W. , Wang, J. and Zhang, D. (2015) The Research of Heat Transfer Area for 55/19 Steam Generator.
Journal of Power and Energy Engineering,
3, 417-422. doi:
10.4236/jpee.2015.34056.
Conflicts of Interest
The authors declare no conflicts of interest.
References
[1]
|
Guangdong Nuclear Power Joint Venture (1986) 55/19 Steam Generator Thermal Hydraulic Design Studies.
|
[2]
|
Steam Generator Compiling Group (1982) The Steam Generator. Atomic Energy Press.
|
[3]
|
Wang, W. (2013) Calculation of Heat Transfer Area for CPR1000 Steam Generator. Dong Fang Electric Review, 27, 53-55.
|
[4]
|
Suzhou Nuclear Power Institute (2014) The Research of CPR1000 Unit Steam Generator. Suzhou.
|
[5]
|
Ding, X.S. (2000) Chemical Cleaning and Heat Transfer Performance of Steam Generator of Nuclear Power Plant. The Cleaning World, 7, 17-22.
|
[6]
|
Westinghouse Electric Company, WNEP-9722 (1997) Mode 60F Steam Generator Thermal and Hydraulic Design Data Report. Qinshan II Nuclear Power Project Units 1 and 2.
|
[7]
|
Lin, C.G., Yu, Z.S. and Yu, O.Y. (2012) AP1000 for Passive Advanced Nuclear Power Plant. Atomic Energy Press.
|