[1]
|
I. S. Diakunchak, “Performance Degradation in Industrial Gas Turbines,” ASME Paper 91-GT-228, 1991.
|
[2]
|
P. C. Frith, “The Effect of Compressor Rotor Tip Crops on Turbo- Engine Performance,” ASME Paper 92-GT-83, 1992.
|
[3]
|
S. A. Khalid, A. S. Khalsa, I. I. A. Waitz, S. C. Tan, E. M. Greitzer, N. A. Cumpsty, J. J. Adamczyk and F. E. Marble, “Endwal Blockage in Axial Compressor,” ASME Paper 98-GT-203,1998.
|
[4]
|
R. J. Kind, P. J. Serjak and M. W. P. Abbott, “Measurements and Prediction of the Effects of Sur-face Roughness on Profile Losses and Deviation in a Turbine Cascade,” ASME Paper 96-GT-203, 1996.
|
[5]
|
R. Kurz and K. Brun, “Degradation in Gas Turbine Systems,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, No. 1, 2001 pp. 70-77. doi:10.1115/1.1340629
|
[6]
|
R. K. Rajput, “A Textbook of Power Plant Engineering,” Laximi Publications, New Delhi, 1995.
|
[7]
|
D. G. Wilson, “The Design of High Efficiency Turbomachinery and Gas Turbines,” MIT Press, Mass, 1994.
|
[8]
|
T. D. Eastop and A. McConkey “Applied Thermodynamics for Engineering Technologists,” 5th Edition, Addison-Wesley Longman, Ltd., UK, 1993.
|
[9]
|
P. K. Nag, “Power Plant Engineering,” 2nd Edition, Tata McGraw Hill Publishing Company Limited, New Delhi, 2001, p.764.
|
[10]
|
E. A. Ogbonnaya, “Modeling Vibration Based Faults in Rotor Shaft of Gas Turbines,” Ph.D Thesis, Rivers State University of Science and Technology, Port Harcourt, 2004.
|
[11]
|
E. Schnei-der, Dermiricioglu, S. Fraanco and D. Therkom, “Analysis of Compressor Online Washing to Optimize Gas Turbine Power Plant Performance,” Proceedings of ASME Turbo Expo 2009, Orlando, 8-12 June 2009, pp. 1-9.
|
[12]
|
E. A. Ogbonnaya and K. Theophilus Johnson, “Use of Multiple Variable Mathematical Method for Effective Condition Monitoring of Gas Turbine,” Proceedings of ASME Turbo-Expo, Glasgow, 14-18 June 2010, pp. 1-4.
|
[13]
|
R. J. Boyle, “Prediction of Surface Roughness and Incidence Effects on Turbine Performance,” Journal of Turbomachinery, Vol. 116, No. 4, 1994, pp. 512-519. doi:10.1115/1.2929468
|
[14]
|
E. A. Ogbonnaya, H. U. Ugwu and C. N. Johnson, “Computer-Aided Solution to the Vibra-tional Effect of Instabilities in Gas Turbine Compressors,” En-gineering, Vol. 2, No. 8, 2010, pp. 658-664. doi:10.4236/eng.2010.28084
|
[15]
|
R. Beebe, “Condition Monitoring by Performance Analysis to Optimize Time for Overhaul of Centrifugal Pumps,” 52nd Annual Meeting for Machinery Failure Prevention Society, Virginia Beach, 3 August 2009, pp. 102-112.
|
[16]
|
C. B. Meher-Homji, M. Chaka and A. E. Brouley, “The Fouling of Axial Flow Compres-sor-Causes,Effects, Susceptibility and Sensitivity,” Proceedings of ASME Turbo Expo Orlando, Florida, 8-12 June 2009, pp. 1-20. www.teurbexpo.org
|
[17]
|
M. Venturini, “Influence of Blade Determination on Compressor and Turbine Performance” ASME Paper GT 2008-50043, 2008.
|
[18]
|
R. E. Duudas, “The Use of Performance Monitoring to Prevent Compressor and Turbine Failures,” ASME Intentional Gas Turine and Aeroen-gine Congress, Paper No. 82-GT-66, 1982.
|
[19]
|
E. D. Bently, C. T. Hatch and B. Grissom “Fundamental of Rotating Machine Diagnositic,” Bently Pressurized Bearing Press, Minden, 2002.
|
[20]
|
E. A. Ogbonnaya, “Diagnosing and Prognosing Gas Turbine Rotor Shaft Faults Using the MICE,” Proceedings of ASME Turbo Expo GT 2009-59450, Orlando, 8-12 June 2009, pp. 1-10.
|
[21]
|
H. C. Pussey, “Turbo-Machinery Condition Monitoring and Failure Prognosis, Shock and Vibration Infor-mation Analysis,” centre/H1-Test Laboratories, Proceedings of Institute of Vibration, Virginia, 8 November 2007, pp 2-10.
|
[22]
|
M. P. Boyce and F. Gonzales, “A Study of Online and Offline Turbine Washing to Optimize the Operation of a Gas Turbine,” Journal of Engineering for Gas Turbine and Power, Vol. 129, No. 1, 2007, pp. 114-129. doi:10.1115/1.2181180
|
[23]
|
J. P. Stalder, “Gas Turbine Compressor Washing State of the Art: Field Experiences, Journal of Engineering for Gas Turbine and Power, Vol. 123, No. 2, 2001, pp 363-370. doi:10.1115/1.1361108
|
[24]
|
S. Demircioglu, “Detail Analysis of Compressor Online Wash Impact in the Gas Turbine Performance,” Diploma Thesis, F. H. Offenbury, 2008.
|
[25]
|
K. R. Brun and H. Simmons, “Aerody-namic Instability and Life Limiting Effects of Inlet and Inter-stage Water Injection into Gas Turbines,” ASME Paper GT 2005-68007, 2005.
|