[1]
|
Katz, H.S., Milevski, J.V., 1978, Handbook of Fillers and Reinforcements for Plastics, Vol.1, ed.1, pp.333-457, Van Notrand Reinhold, New York.
|
[2]
|
Unal, H., Findik, F., 2003, “Mechanical Behavior of Nylon Composites Containing Talc and Kaolin.” J.Appl Polym. Sci, Vol. 88, pp. 1694-1697.
|
[3]
|
Walker, B. M., 1979, Handbook of Thermoplastic Elastomer, Vol.1, ed.1, pp. 103-118, New York, Litton Education Publishing.
|
[4]
|
Kaforglou, N. K., 1977, “Thermomechanical studies of semicrystalline polyether-ester copolymers.” J.Appl Polym Sci, Vol. 21, pp. 543-554.
|
[5]
|
Nagai, Y., Ogawa, T., Zhen, L. Y., 1997, “Analysis of weathering of thermoplastic elastomers." Polym. Degrad. Stab, Vol.56, pp. 115-121.
|
[6]
|
Aso, O., Eguiazabal, J. I., Nazabal, J., 2007, “The influence of surface modification on the structure and properties of a nanosilica filled thermoplastic elastomer.” Compo. Sci. Tech, Vol. 67, pp. 2854-2863.
|
[7]
|
George, W., 1999, Mica, Handbook of Fillers, Vol. 1, ed. 2, pp. 112-115, Toronto, New York, Chem Tech Publishing.
|
[8]
|
Bose, S., Mahanwar, P. A., 2004, “Effect of Particle Size of Filler on Properties of Nylon-6” J. Min .Mat .Char.& Eng., Vol. 3, No.1, pp. 23-31.
|
[9]
|
Baral, D., De, P. P., Nando, G. B., 1999, “Thermal characterisation of mica filled thermoplastic polyurethane composites.” Polym. Degrad. Stab, Vol. 65, pp. 47-51.
|
[10]
|
Pinto, U. A., Visconte, L. LY., 2001, “Mechanical properties of Thermoplastic Polyurethane elastomer with mica and aluminium trihydrate.” Eur. Polym. J, Vol. 37, pp. 1935-1937.
|
[11]
|
Gan, D., Lu, S., Song, C., Wang, S., 2001, “Mechanical properties and frictional behavior of mica filled Poly(aryl ether ketone) composites.” Eur. Polym. J, Vol. 37, pp. 1359-1365.
|
[12]
|
Song, C., Wang, S., Gan, D., Lu, S., 2001, “Physical properties of Poly(ether ketone ketone)/mica composites. ” Mat. Lett, Vol. 48, pp. 299-302.
|
[13]
|
Pastorini, M. T., Nunes, R. C. R., 1999, “Mica as a filler for ABS/Polycarbonate blends.” J. Appl. Polym. Sci., Vol. 74, pp. 1361-1365.
|
[14]
|
Joshi, A. D., 1993, “TPO vs PVC for automotive interior.” J. Coated Fabrics, Vol. 23, pp. 67- 73.
|
[15]
|
Parister, L. M., 1983, “Copolyester: The fuel resistant thermoplastic elastomer.” J. Elastomer & Plastics, Vol. 15, pp.146- 158.
|
[16]
|
He, D., Jiang, B., 1993, “The elastic modulus of filled polymer composites.” J. Appl. Polym. Sci., Vol. 49, pp. 617-621.
|
[17]
|
Gahleitener, M., Neibl, W., 1994, “Correlation between Rheological and mechanical properties of mineral filled polypropylene composites”, J. Appl. Polym. Sci., Vol. 53, pp. 283-289.
|