[1]
|
U. Johnson, H. Mahmud and Z. Mohd, “Enhancement and Prediction of Modulus of Elasticity of Palm Kernel Shell Concrete,” Materials and Design Journal, Vol. 32, No. 4, 2010, pp. 2143-2148.
|
[2]
|
H. Larbig, H. Scherzer, B. Dahlke and R. Poltrock, “Natural Fiber Reinforced Foams Based on Renewable Resources for Automotive Interior Applications,” Journal of Cellular Plastics, Vol. 34, No. 4, 1998, pp. 361-379.
|
[3]
|
D. Rozman, A. Zainal and S. Umaru, “Natural Fibers, Biopolymers, and Biocomposites: Oil Palm Fiber-Thermo- plastics Composites,” CRC Press, Boca Raton, 2005.
|
[4]
|
P. Wambua, U. Ivens and I. Verpoest, “Natural Fibers: Can They Replace Glass in Fiber-Reinforced Plastics?” Composites Science and Technology, Vol. 63, No. 9, 2003, pp. 1259-1264.
doi:10.1016/S0266-3538(03)00096-4
|
[5]
|
P. Wambua, B. Vangrimde, S. Lomov and I. Verpoest, “The Response of Natural Fiber Composites to Ballistic Impact by Fragment Simulating Projectiles,” Composite Structures, Vol. 77, No. 2, 2007, pp. 232-240.
doi:10.1016/j.compstruct.2005.07.006
|
[6]
|
R. Kozlowski and M. Helwig, “Lignocellulosic Polymer Composite,” In: P. N. Prasad, Ed., Science and Technology of Polymers and Advanced Materials, Plenum Press, New York, 1998, pp. 679-698.
|
[7]
|
M. M. Davoodi, “Conceptual Design of a Polymer Composite Automotive Bumper Energy Absorber,” Materials & Design, Vol. 29, No. 7, 2008, pp. 1447-1452.
doi:10.1016/j.matdes.2007.07.011
|
[8]
|
D. J. Andrea and W. R. Brown, “Material Selection Processes in Automotive Industry,” Michigan Transportation Research Institute, Ann Arbor, 1993.
|
[9]
|
E. W. Godwin and F. L. Matthews, “Review of the Strength of Joints in Fibre-Reinforced Plastics: Part 1 Mechanically Fastened Joints,” Composites, Vol. 11, No. 3, 1980, pp. 155-160. doi:10.1016/0010-4361(80)90008-7
|
[10]
|
S. Jevanthi and J. JanciRani, “Improving Mechanical Properties by Hybrid Long Fiber Reinforced Composite for Front Beam of Automotive,” European Journal of Scientific Research, Vol. 60, No. 2, 2011, pp. 195-199.
|