[1]
|
J. Y. Tsao, “Solid-State Lighting: Lamps, Chips and Materials for Tomorrow,” IEEE Circuits Devices Magazine, Vol. 20, No. 3, 2004, pp. 28-37. doi:10.1109/MCD.2004.1304539
|
[2]
|
T. Komine and M. Nakagawa, “Fundamental Analysis for Visible-Light Communication System Using LED Lights,” IEEE Transactions on Consumer Electronics, Vol. 50, No. 1, 2004, pp. 100-107. doi:10.1109/TCE.2004.1277847
|
[3]
|
R. Mehta, D. Deshpande, K. Kulkarni, S. Sharma and D. Divan, “LEDs—A Competitive Solution for General Lighting Applications,” IEEE Energy 2008, Atlanta, 17-18 November 2008, pp. 1-5. doi:10.1109/ENERGY.2008.4781063
|
[4]
|
“Electromagnetic Compatibility (EMC), Part 3-2: Limits—Limits for Harmonic Current Emissions (Equipment Input Current ≤ 16 A per Phase),” International Standard IEC 61000-3-2, 2001.
|
[5]
|
Energy Star Program Requirements for Solid State Lighting Luminaries. USA, 2007.
|
[6]
|
J. P. Noon, “Designing High-Power Factor Off-Line Power Supplies,” Proceedings of Unitrode Power Supply Design Seminar Manual SEM1500, Texas Instruments, August 2003, pp. 2-6.
|
[7]
|
C. K. Tse, “Circuit Theory of Power Factor Correction in Switching Converters,” International Journal of Circuit Theory and Applications, Vol. 31, No. 2, 2003, pp. 157-198.
|
[8]
|
H. van der Broeck, G. Sauerlander and M. Wendt, “Power Driver Topologies and Control Schemes for LEDs,” IEEE Applied Power Electronics Conference, Anaheim, 25 February-1 March 2007, pp. 1319-1325.
|
[9]
|
G. Spiazzi and J. P. Pomilio, “Interaction between EMI Filter and Power Factor Pre-regulators with Average Current Control: Analysis and Design Considerations,” IEEE Transactions on Industrial Electronics, Vol. 46, No. 3, 1999, pp. 577-584. doi:10.1109/41.767065
|
[10]
|
M. Ogata and T. Nishi, “Gragh-Theoretical Approach to 2-Switch DC-DC Converters,” International Journal of Circuit Theory and Applications, Vol. 33, No. 2, 2005, pp. 161-173. doi:10.1002/cta.311
|
[11]
|
A. Lazaro, A. Barrado, M. Sanz, V. Salas and E. Olias, “New Power Correction AC-DC Converter with Reduced Storage Capacitor Voltage,” IEEE Transactions on Industrial Electronics, Vol. 54, No. 1, 2007, pp. 384-397. doi:10.1109/TIE.2006.888795
|
[12]
|
B. Sharifipour, J. S. Hung, P. Liao, L. Huber and M. M. Jovanovic, “Manufacturing and Cost Analysis of Power-Factor-Correction Circuits,” IEEE Applied Power Electronics Conference and Exposition, Anaheim, 15-19 February 1998, pp.490-494. doi:10.1109/APEC.1998.647734
|
[13]
|
M. Rico-Secades, A. J. Calleja, J. Ribas, E. L. Corominas, J. M. Alonso, J. Cardesin and Garcia-Garcia, “Evaluation of a Low-Cost Permanent Emergency Lighting System based on High-Efficiency LEDs,” IEEE Transactions on Industry Applications, Vol. 41, No. 5, 2005, pp. 1386-1390. doi:10.1109/TIA.2005.853389
|
[14]
|
Z. Y. Chen, H. L. Yin and P. Li, “Power Quality Problem and New Technology for Its Improvement,” Power System Technology, Vol. 26, 2007, pp. 67-70.
|
[15]
|
M. X. Han, Y. Yong and H. Liu, “Principle and Realization of Dynamic Voltage Regulator Based on Line Voltage Compensating,” Proceedings of the CSEE, Vol. 23, 2003, pp. 49-53.
|
[16]
|
S. Wall and R. Jackson, “Fast Controller Design for Single-Phase Power-Factor Correction Systems,” IEEE Transactions on Industrial Electronics, Vol. 44, No. 5, 1997, pp. 654-660. doi:10.1109/41.633465
|
[17]
|
W. Aloisi and G. Palumbo, “Efficiency Model of Boost DC-DC PWM Converters,” International Journal of Circuit Theory and Applications, Vol. 33, No. 5, 2005, pp. 419-432. doi:10.1002/cta.329
|
[18]
|
Y. Yueh-Ru and C. Chern-Lin, “Steady-State Analysis and Simulation of a BJT Self-Oscillating ZVS-CV Ballast Driven by a Saturable Transformer,” IEEE Transactions on Industrial Electronics, Vol. 46, No. 2, 1999, pp. 249-260. doi:10.1109/41.753763
|