Difference between the Time Intervals in the Special Relativistic Theory Calculated with the Aid of an Invariance Property between the Mechanical Expressions ()
1. Introduction
In principle, any calculation of a change of the scale of some mechanical parameter in the special relativistic theory is accompanied by an insight into the scale changes belonging also to other parameters than that taken into account [1]. But recently an invariance of the differences of parameters belonging to different mechanical scales has been pointed out [2]. Our aim became to demonstrate that this situation allows us to estimate the size change of a single mechanical parameter alone. The scale of time has been chosen as our basic example.
In the first step, we present the Lorentz transformation of the variables pair
into the pair
[2]. Next the intervals
and
are calculated in terms of t and x. Finally the quanta of the electric capacitance in the hydrogen atom and their change with the quantum number are examined.
2. Lorentz Transformation and the Invariant Expressions for the Mechanical Parameters
If the Lorentz transformation is specified for the variables pair
going into the pair
, the corresponding transformation formulae are:
(1)
and
(2)
The t and t' are the time coordinates, the x and x' are coordinates of position in the particle one-dimensional motion along the axis x, so the changes of two parameters are involved. The v is a speed between the system labelled by
and that labelled by
. We obtain for the difference [2]
(3)
The result in (3) indicates the invariant behaviour of the difference
(3a)
upon the Lorentz transformation formulae in (1) and (2). From (3a) it comes out that
(4)
on condition we put
(4a)
and
(4b)
Our aim is to point out that the above properties concerning the transformed and non-transformed parameters of t and x can lead to a simple reference between t' and t.
3. The Difference of t' and t Represented as a Function of Some Remainder Parameters
We multiply Equation (1) by t and Equation (2) by x. A simple rearrangement of terms leads to the formulae:
(5)
and
(6)
The difference of (5) and (6) leads to the result:
(7)
or with the aid of (3a) to the formula:
(8)
The result in (8) is dictated by the property (3a). The calculations done farther in the paper refer to the non-primed coordinates system
Another approach to the rearrangement of terms in (8) gives:
(9)
By taking into account (4a) and (4b) we have:
(9a)
but in virtue of (9):
(10)
The left-hand side of (8) can be transformed into
(11)
so
(11a)
indicating a positive value of (11a) on condition
.
An effect of (4a) and (4b) leads together with the relation (3) to the formula:
(12)
so the last step of (12) gives
(13)
or
(13a)
4. An Equation for the Interval Δt and Its Properties
Because of (11a) we have
(14)
therefore
(14a)
A final equation for the interval
is obtained from the relations (11a), (13) and (14a):
(15)
In effect the equation coupling the pairs
and
becomes
(16)
We divide (16) by
and get the equation:
(17)
which gives
(17a)
or
(18)
The contents of the square brackets in (17a) and (18) is represented in (17).
Taking the square root of (18) we obtain:
(19)
We divide both sides of (19) by t:
(20)
From this equation we have:
(21)
We see from (21) that the ratio
is a sum of a constant dependent solely on
increased by the ratio
multiplied by another constant term depend solely on
.
The next step concerns solution of the equation for
. We obtain from (13a)
(22)
This gives
(23)
where
(24)
(25)
(26)
(27)
The solution of (22) gives:
(28)
Assuming
to be a small number the square root in (28) is taken next only with a positive sign. We obtain
or
(29)
On the basis of the result in (21) we obtain for the right-hand side of (29) the expression dependent solely on t and x:
(30)
The term
can be readily obtained from (21) as a function of t and x.
5. The Calculation of
We do it by taking into account the relation (9):
(31)
We obtain:
(32)
where expression
is represented by (30).
It seems interesting to compare both terms entering the product entering the last square root in (32). We have [see (19)]
(33)
whereas
(34)
In effect:
(35)
Therefore
(36)
The expressions entering the empty brackets in (17a)-(21) as well as in (30) and (33)-(36) are fully represented in Equation (17).
6. Example of Distance x Representing the Quanta of the Electric Capacitance and Their Change
An example of x and Δx can be presented by considering the electric capacitance C of the condenser. A reference to C and the charge q of the condenser is given by the formula [3]:
(37)
where V is the potential difference. On the other side, when the potential difference (37) is applied to the resistance R, the current intensity i produced by V and R becomes
(38)
Let us assume that i is representing the electric current done along the n-th electron orbit about the nucleus of the hydrogen atom. Then
(39)
Here [4]
(40)
is the time period of the electron motion along the n th orbit, m is the electron mass;
(41)
is the absolute value of the electron charge. Then it can be shown that R is the quantum parameter [5]
(42)
valid for all orbits n in the atom. It is worth to note that the R size in (42) is equal to the resistance characteristic for the integer quantum Hall effect; see e.g. [6].
By taking into account (39), (41) and (42) we obtain for C:
(43)
Evidently the lowest quantum of the capacitance
corresponds to the orbit
:
(44)
The size of
is equal to the radius of the shortest orbit in the hydrogen atom. Further
increase proportionally to
[see (43)], whereas the orbit length remains proportional to
.
The dimension of
is
(45)
In this way we find that
(46)
A relativistic change of x modifies the x entering (46) into x+Δx.
7. Euler-Lagrange Equation Applied in Examining the Particle Mass
In [2] an attempt is done to apply the Euler-Lagrange equation in examining the behaviour of the particle mass m. A special application may concern the force F acting on a moving particle when it is reduced to a single term [3]:
(47)
This holds on condition
(48)
The Lagrangian function let be [2]:
(49)
where
is a time component of the vector potential denoted—for historical reasons—by
. The derivative
can be joined with the mass derivative
, so the Euler-Lagrange equation becomes
(50)
Equation (50) gives:
(51)
Evidently for
beginning from
the formula (51) can provide us with F tending to an expression representing a positive
.
8. Summary
In the paper, the problem of a change of the interval Δt of a single mechanical variable—namely the time t—due to the existence of a non-vanishing velocity v of a moving one-dimensional system has been examined. First a simple dependence on v for the change Δt of the variable t is obtained, next a similar dependence is calculated for Δx equal to the change of the position coordinate x.