[1]
|
El-Hag Ali, H. A. Shawky, H. A. Abd El Rehim, E.A. Hegazy, Synthesis and characterization of PVP/AAc copolymer hy-drogel and its applications in the removal of heavy metals from aqueous solution , European Polymer Journal 39, 2337-2344 (2003).
|
[2]
|
Andrzej G. Chmielewski , Mohammad Haji-Saeid, Shamshad Ahmed, Progress in radiation processing of poly-mers, Nuclear Instruments and Methods in Physics Research B 236, 44-54 (2005).
|
[3]
|
Shehap, R. A. Abd Allah, A. F. Basha, F. H. Abd EL-Kader, Electrical Properties of Gamma Irradiated, Pure, and Nickel Chloride-Doped Polyvinyl Alcohol Films, Journal of Applied Polymer Science, Vol. 68, 687-698 (1998).
|
[4]
|
Banford HM, Fouracre RA, Faucitano A, Butta-fava A, Martinotti F. The influence of gamma irradiation and chemical structure on the dielectric properties of polypropylene. Radiat Phys Chem 48(1), 129-30 (1996).
|
[5]
|
Erjun Tang, Guoxiang Cheng , Xiaolu Ma, Preparation of nano-ZnO/PMMA composite particles via grafting of the co-polymer onto the surface of zinc oxide nanoparticles, Powder Technology 161, 209-214 (2006).
|
[6]
|
F. Sharaf, M. H. I. El-Eraki, A. R. El-Gohary & F. M. A. Ahmed, The optical and mechanical properties before and after gamma irradiation of poly (viny1 alcohol) films doped with lead acetate, Polymer Degradation and Stability 47, 343-348 (1995).
|
[7]
|
F. Yakuphanoglu, G. Bar?m, I. Erol, The effect of FeCl3 on the optical constants and optical band gap of MBZMA-co-MMA polymer thin films, Physica B 391, 136-140 (2007).
|
[8]
|
Hiroshi Yoshida and Tsuneki Ichi-kawa,Temperature effect on the radiation-degradation of poly(methyl methacrylate), Radiat. Phys. Chem. Vol. 46, No. 4-6, 921-924 (1995).
|
[9]
|
H. M. Abdel-Hamid, Y. H. A. Fawzy and S. M. El-Sayed, Optical and Morphological Proper-ties of Electron –beam Irradiated High-Density Thin Poly Eth-ylene Films, Egypt. J. Rad. Sci., Applic. Vol. 18, No. 2, 465-479 (2005).
|
[10]
|
L. C. Lopérgolo, L. H. Catalani, L. D. B. Machado, P. R. Rela, A.B. Lug?o, Development of reinforced hydrogels- I. Radiation induced graft copolymerization of methyl methacrylate on non-woven polypropylene fabric, Ra-diation Physics and Chemistry 57, 451-454, (2000).
|
[11]
|
Maria Omastova, Juraj Pavlinec, Jurgen Pionteck ,Frank Simon,”Synthesis, Electrical Properties and Stability of Polypyrrole-Containing Conducting Polymer Composite, Polymer International 43, 109-116 (1997).
|
[12]
|
R. M. Radwan, S. lotfy, O. S. Desouky, Enhancement of the electrical per-formance of poly(vinyl) alcohol by doping with chlorophyll and gamma irradiation, Nucl. Instr. and Meth. in Phys. Res. B 266, 3953-3958 (2008).
|
[13]
|
R. M. Radwan, Y. H. A. Fawzy, A. El-Hag Ali, Electrical behaviour of butyl acrylate / methyl methacrylate copolymer films irradiated with 1.5 MeV electron beam, Radiation Physics and Chemistry, 77,179-185 (2008).
|
[14]
|
R. M. Radwan, Y. H. A. Fawzy, H. A. Ashry, F. A. S. Soliman, Characterization of the electrical behavior of rare earth elements during the upgrading of monazite. J. Phys. D 37, 764-769(2004).
|
[15]
|
R. Mishra , S. P. Tripathy , D. Sinha , K. K. Dwivedi, S. Ghosh, D.T. Khathing , M. Muller , D. Fink , W.H. Chung, Optical and electrical properties of some electron and proton irradiated polymers, Nuclear Instruments and Methods in Physics Research B 168, 59-64 (2000).
|
[16]
|
R. Mishra, S. P. Tripathya, K. K. Dwivedi, D. T. Khathing, S. Ghosh, M. Muller, D. Fink, Electron induced modification in polypropylene, Radiation Measurements 33, 845-850 (2001).
|
[17]
|
R. Sosa Fonseca, M. Flores, R. Rodriguez T., J. Hernández, A. Mun?z F., Evidence of energy transfer in Er3+-doped PMMA-PAAc copolymer samples, Journal of Lu-minescence 93, 327-332 (2001).
|
[18]
|
Sangita Rajvaidya, R. Bajpai, A. K. Bajpai, Effect of gamma irradiation on the inter-penetrating networks of gelatin and polyacrylonitrile: Aspect of crosslinking using microhardness and crosslink density meas-urements, Journal of Applied Polymer Science, Vol. 101, 2581-2586 (2006).
|
[19]
|
Tadaaki Inoue, Guohua Chen, Katsu-hiko Nakamae, Allan S. Hoffman, An AB block copolymer of oligo(methyl methacrylate) and poly(acrylic acid) for micellar delivery of hydrophobic drugs, Journal of Controlled Release 51, 221-229(1998).
|