[1]
|
C. J. Fellows and F. Shaw, “A Laboratory Investigation of Glass to Mould Heat Transfer during Pressing,” Glass Technology, Vol. 19, No. 1, 1978, pp. 4-9.
|
[2]
|
P. Moreau, D. Lochegnies, S. Gregoire and J. César de Sa, “Analysis of Lubrification in Glass Blowing: Heat Trans- fer Measurements and Impact on Forming,” Glass Tech- nology : European Journal of Glass Science and Tech- nology, Part A, Vol. 49, No. 1, 2008, pp. 8-16.
|
[3]
|
D. H?hne, B. Pitschel, M. Merkwitz, R. L?big, “Meas- urement and Mathematical Modelling of the Heat Trans- fer in the Glass Forming Process, in Consideration of the Heat Transfer Coefficients and Radiation Influences,” Glass Science and Technology, Vol. 76, No. 6, 2003, pp. 309-317.
|
[4]
|
W. C. Dowling, H. V. Fairbanks and W. A. Koehler, “A Study of the Effect of Lubricants on the Adherence of Molten Glass to Heated Metals,” Journal of the American Ceramic Society, Vol. 33, No. 9, 1950, pp. 269-273.. doi:10.1111/j.1151-2916.1950.tb12797.
|
[5]
|
J. Pech, G. Berthomé, M. Jeymond and N. Eustathopou- los, “Influence of Glass/Mould Interfaces on Sticking,” Glass Science Technology, Vol. 78, No. 2, 2005, pp. 54-62.
|
[6]
|
P. Manns, W. D?ll, G. Kleer, “Glass in Contact with Mould Materials for Container Production,” Glastech. Ber Glass Science and Technology, Vol. 68, No. 12, 1995, pp. 389-399.
|
[7]
|
K. D. Fischbach, K. Georgiadis, F. Wang, O. Dambon, F. Klocke, Y. Chen and A.Y. Yi, “Investigation of the Eff- ects of Process Parameters on the Glass-to-Mold Sticking Force during Precision Glass Molding,” Surface and Coatings Technology, Vol. 205, 2010, pp. 312-319.
doi:10.1016/j.surfcoat.2010.06.049
|
[8]
|
D. Rieser, G. Spie? and P. Manns, “Investigations on Glass-to-Mold Sticking in the Hot Forming Process,” Journal of Non-Crystalline Solids, Vol. 354, 2008, pp. 1393-1397.
|
[9]
|
M. Falipou, C. Donnet, “Sticking Temperature Investiga- tions of Glass/Metal contacts—Determination of Influ- encing Parameters,” Glastech. Ber. Glass Science and Technology, Vol. 70, No. 5, 1997, pp. 137-145.
|
[10]
|
G. de Vaucorbeil, “Le Choix des Matériaux pour les Moules de Verrerie,” Verre, Vol. 9, 2003, pp. 38-42.
|
[11]
|
R. Guilbaut, D. Lochegnies, P. Moreau, “In and Outside Vision of Glass Blow and Blow,” in: D. Lochegnies and P. Moreau, Eds., Proceedings of the 2nd International Colloquium Modelling of Glass Forming and Tempering, Valenciennes, France, Presses Universitaires de Valen- ciennes, Valenciennes, 23-25 January, 2002, pp. 57-64.
|