The Twin Bambili Maars (Bamenda Mountains, Cameroon Volcanic Line): Simulative Model of Formation ()
1. Introduction
Maars are characterized by steep-sided walls which cut below the pre-eruptive surface. They are commonly filled with water and surrounded by low-lying outward-dipping ejecta layers whose thickness thins are away from the vent rim. A maar’s physical attribute is closely related to its mode of formation. In cases where a substantial disruption takes place below the surface, the ejection of material opens temporalcavities that collapse to forma maar [1] [2] . Maars originate from a “wet” eruption (phreatomagmatic) when magmacomes in contact with external water source e.g. ground water [3] or a surficial body of water [4] . Two types of maars can be distinguished; hard-substrate and soft-substrate maars, displaying distinct surficial expressions [5] [6] . The former is produced when magma interacts with water in fractured or jointed aquifers, and the latter formed when magma interacts with wet unconsolidated sediment or pore aquifers with high permeability [5] [6] . The study of maars has been intensified worldwide, laying more emphasis on the eruption energy and hazards related to the history of their formation [2] . Also, researchers study maar volcanoes to acquire paleoclimatic data and underground mapping [7] .
Volcanic activities in Cameroon are localized along the Cameroon Volcanic Line (CVL), which is a major lineament in Africa about 1700 km in length and 100 km wide trending NE-SW [8] [9] . The CVL is made up of an oceanic and a continental sector. The continental sector is dotted with at least 40 lakes [10] (Table 1), some of which are maars. Some studied maars along this line include: Nyos [11] , Monoun [12] , Barombi Koto [13] , Barombi Mbo [14] and Debunscha [15] . The Mount Bamenda (2621 m) occupies a surface area of 600 km2 and it is couple with the Bambouto Mountains (2740 m) and the Oku Mountain (3011 m) (Figure 1(a)). It lies between longitudes 10˚00'E and 10˚30'E and latitudes 05˚45'N and 06˚10'N (Figure 1(b)). It constitutes in volumetric importance the fourth largest volcano of the CVL after Mount Cameroon, Mount Manengouba and Mount Bambouto [16] . These mountains constitute the volcanic centers of the Western Cameroon Highlands (WCH) [17] and they are characterized by the predominance of felsic lavas over mafic ones [18] [19] . All rest on a Pan-African
Table 1. Geographic and morphometric feature of Cameroon lakes: median crater rim height above the lake surface-rim; Maximum depth Zmax; mean depth-Z; volume development-3Z/Zmax; relative depth- Zr.
Source: [23] (*) this paper.
Figure 1. Map of study area. (a) Digital Elevation Model (DEM) of Mount Bamenda and surroundings (Bamenda mountain shown by Black square); Modified from [17] . (b) 3D view of Bamenda Mountain showing the Bambili maar (BM) at its summit (Black Square).
basement made up of granite and gneiss [20] [21] [22] .
2. Methodology
This paper presents the physical volcanic history of the Bambili twin maarson the WCH and focuses on its mode of emplacement. Field investigations were made on different deposits in and around the maars in order to identify and classify the different pyroclastic materials ejected. From field photographs and field observations the relationships between the maars were described especially morphological parameters like size and height. The layers of the different pyroclastic units were differentiated and described taking into consideration their contrasting internal features such as grain size distribution, thickness, relative sorting, structures and components (juvenile and non-juvenile). Clasts size determination, shapes and types were limited to qualitative appreciations and a pre-hypothesis for the mechanism of emplacement conceived. The findings in this paper will greatly enhance the understanding of volcanic history of maars in the region and along the CVL.
3. Results
3.1. Geomorphic Features of the Bambili Maars (BM)
The BM is a bowl-shaped depression with steep-sided walls that cut through trachytic rocks and surrounded by a rim which decreases in radius away from the vent. The Bambili northern maar (BNM) is situated 50 m below the Bambili southern maar (BSM) (Figure 2) and both are linked by a stream [24] . Field observation and data treatment of (DEM) clearly reveal that the BSM has a larger
Figure 3. Photographs of Bambili maars; (a) Field image of BSM; (b) Field image of BNM.
size than the BNM (Figure 3). The BNM has an outlet in the northeast direction towards the Bambili village. The BSM has a diameter of 31 ha and its floor is found at an altitude of 2313 m. The peak of the Bamenda Mountain is found at the border of BSM which measures 2621 m. The western wall of the BSM is made up of a series of steps (Figure 3(a)) forming an escarpment with gradient ranging between 60˚ to 65˚. The eastern walls of both BNM and BSM are straight with no steps and make an almost 90˚ with the floors of the Maars.
3.2. Field Description of Inner Wall Deposits of the Bambili Maars
The inner deposits considered here are those found within the maars. Different types of deposits were identified within the inner walls.
・ Xenoliths; these are large boulders of trachytic rocks (Figure 4(a)) observed which occasionally reach 3 m in length and contain large feldspar crystals at the foot of the escarpment within the BM. Feldspar crystals are elongated and randomly orientated within finer materials (Figure 4(b)). The sizes of these xenocryst range from 4 cm to few mm.
Figure 4. Photographs of marginal products in BM; (a) Trachyte and basalt blocks in tephra material; (b) Large feldspars crystals in trachyte found and the base of column; (c) Fusiform volcanic bomb; (d) Explosion breccias; (e) Trachytic columns bordering swampy maar (peak of Mount Bamenda).
・ Explosion breccia; these deposits were observed around the outlet of the BNM and at the foot of the escarpment within the BSM. The explosion breccia is coarse grained, chaotic pyroclastic deposit consisting of coarse angular trachytic fragments, 2 cm to 15 cm in diameter (Figure 4(c)), within ash and lapilli matrix with average clasts size of less than 10 cm (Figure 4(d)).
・ Bombs and blocks; the volcanic bombs are spiral (fusiform) while others are sub-rounded, having a reddish-brown color and occur within tephra deposit on the inner wall of the Maar. Some of the bombs have nodules on their surfaces (Figure 4(c)). The bomb sizes range between 2 - 20 cm and the nodules on their surfaces display exfoliation. Along the inner walls of the BM around the top of the rims, large isolated blocks of basalt and trachyte are observed within tephra fall outs (Figure 4(a)), and their sizes occasionally reach 1 m in diameter.
・ Polygonal columns; the Bambili maars are emplaced within a trachytic rock whose upper portions are displayed in prisms (Figure 4(e)). These prisms are visible within the western inner walls of the BNM and have tetragonal to hexagonal faces. On the BSM, most of the prisms are covered by pyroclastic materials.
Generally, the two maars are separated by a trachytic intra maardome. The exposed part of the dome shows that the inner walls are dipping towards the BSM (Figure 5(a)). This phenomenon is also noted on the western inner walls of the BNM, (Figure 5(b)).
Stratigraphic Units and Associated Pyroclastic Facies
Three main stratigraphic sections were examined since the maar rims are completely covered by vegetation and the exposed columns at the borders of the maars are predominantly made up of pre-maar units. Two sections were examined on the western inner wall of the BNM and one section examined on the eastern inner wall of the BSM.
Figure 5. Photographs of tilted rocks (a) intra maardome dipping towards BSM (b) western inner wall of the BNM.
Figure 6. Stratigraphic column of unit 1.
Unit 1: east of the BSM
This unit has a thickness of 60 cm with its upper part marked by diffused stratified matrix supported by tephra. It is characterized by the presence of fine-grained fallouts (ash and lapilli size) with diffused bedding planes (Figure 6). The base of unit L1 (18 cm) is composed of consolidated ash. This layer has an orange-brown color with medium grain size rock fragments which rarely exceeds 3 mm. It is overlain by an unsorted lapilli size layer L2 (22 cm). L2 has abundant larger clasts, orange grey in colour and angular to sub-angular whitish lithic fallouts. Above this bed lies a lithic rich mostly altered clasts L3 (20 cm). This layer is characterized by abundant and larger size accreational clasts which are mostly sub rounded in shape than the preceding L1 and L2 layers. It appears dark than the corresponding L1 and L2 layers and its clast sizes range between a few millimeters to centimeters. Clast size variation increases up-ward from L1 to L3.
Unit 2: north of the BNM
This unit is made up of non-stratified tephra deposits composed of coarse lapilli with variable fragment sizes of different petrographic types. The layer is brownish in colour containing juvenile (Volcanic bombs and scoria) and non- Juvenile (granitic) entrained fragments (Figure 7). Generally, clasts sizes within this unit vary from 2 mm to 10 cm (basalt bomb).
Unit 3: between the BNM and BSM
This unit is thicker around the BNM (50 m) and its thickness reduces towards
Figure 7. Stratigraphic column of Unit 2.
the BSM (30 m) disappearing towards the summit. This unit rest directly on trachytic rocks (pre-maar unit).It is marked by coarse grained lapilli interbedded with lapilli tuff and mudstone and abundant juvenile fragments. The unit is divided into two horizons; U1 and U2 (Figure 8). U1 is characterized by abundant lapilli, juvenile and non-juvenile fragments. It is sub-divided into h1 to h5 lacking lacks bomb sacs and accretionary lapilli, reverse grading and scarce trachytic blocks towards the top. U1 terminates with a layer of very coarse angular lapilli, altered blocks and scoria. U2 is well sorted and has larger clast sizes with the presence of mudstone. There is a strong variation in grain size ranging from fine-coarse lapilli with numerous interbedded blocks of trachyte and mudstone.
Pre-maar Unit (Trachyte)
The outer deposits of the maars are poorly represented and characterized mostly by scoria, ash and lava flow. Scoria deposits are found interbedded within the ash. The ash deposits lie at about 1 km away from the maar (Figure 9). The scoria has numerous vesicles of various sizes and shapes (Figure 9(a)).
4. Discussions
4.1. Volcanic History of the Bambili Maars
The study of volcanic products emitted from these maars reveals that three volcanic eruption styles (effusive, strombolian and phreatomagmatic) contributed to their formation. The effusive eruption here is represented by aa lava flows which outcrop as blocks and boulders with size ranging from 30 cm to 2 m in diameter. It has an estimated thickness of 10 m. The flows outcrop about 1.5 km from the maars and also as blocks in tephra deposits of the BM. The strombolian eruption gives an origin of two tephra cones. These deposits consist of scoria bombs, lapilli and cinders with massive bedding. The tephra has abundant vesicles giving the lapilli and scoria a cindery appearance. They are asymmetrical
Figure 9. Erupted products; (a) highly vesicular scoria; (b) ash deposit further away from the vents; (c) a lava flows BSM.
having an average height of 140 meter with their slopes dipping at 11 - 15 degree. During phreatomagmatic eruption, uprising magma comes in contact with water and generate enough pressure which triggered an explosion. Pre-existing lava fragments of about 3 cm were deposited closed to the BSM while finer cinder and ash fragments were deposited in the eastern direction to form unit 1 above. Air fall deposits on the west formed unit 3a graded-stratified phreatomagmatic deposit.
4.2. Simulative Formation Model
These maars were formed simultaneously from uprising magma which came in contact with ground water. This was followed by a series of lava flows which produced layers of lava and pyroclasts, then followed the collapse of the walls forming escarpments which surrounded the maars (Figure 10). The vents are slightly tilted towards the NW which is testified by the huge volume of tephra and lava deposits towards this direction.
The BNM contains a lake which suggests that the eruption cut through the water table represented today by the level of the water it contain, while the BSM is swampy and its water drains into the BNM. The differences in the altitude of the maar floor of both BNM and BSM clearly explain why water drains from the BSM into BNM. The inner walls of both maars are surrounded by step escarpments.
The heterolithologic nature of this rock found in both BSM and BNM cannot be attributed to transport-related sorting mechanisms, but to possible sub-surface processes, like: a higher degree of fragmentation, or a more prolonged phase of post-fragmentation transport and abrasion of the already formed basalts and trachyte in the volcanic conduit, or a higher degree of fracturation of country rocks [25] . The intra-maar dome and inner wall, which are tilted towards the swampy maar suggests a violent activity during its emplacement such that they were affected. Basalt and trachyte blocks are abundant in an approximate ratio of 3:1 respectively in BNM and BSM. This indicates that the fragmentation in the two conduits took place at different depths. Though it is suggested that the two eruptions took place at different levels, another possibility is that the cinder on the maar floor of the BSM might have been significant enough to fill this depression and then drop its water level. The pumicious fallouts around the dome shows that the last phase of the eruption was purely strombolian. The fusiform bomb will have resulted from a very hot fluid magma that chilled sufficiently enough during flight to retain the spindle shape and deposit by fall out. Basaltic bombs from unit 3 in BNM show low vesicularity, indicating that a greater amount of energy came from conversion of external water to steam; furthermore, the violent release of magmatic volatiles would have played a minor rule the eruption style [26] [27] .
The chilled lava layer existing within the maar products (unit 3), suggests that a significant temperature difference existed between melt and the country rock at the initial contact [25] and equally the addition of water into the system. The abundance of accidental clasts in this unit indicates hydroclastic mechanisms that are characteristic for shallow phreatomagmatic eruptions. This unit is equally characterized by poor sorting and lacks fabric structures. This is usually attributed to high particle concentration rather than turbulence [28] . Sagging in unit 3 by mud stone fragments is an indication of abundant moisture and wetness of the environment [29] [30] [31] [32] . The mudstone lumps are intact, but slightly deformed and marginally altered within this deposit. This may provide further evidence for laminar flow conditions in the body of the pyroclastic flow. The elongated and angular crystals here considered as non-juvenile crystals may have been derived from the fragmentation of accessory or accidental lithics [28] , and so, during the formation of the maar, the already formed crystals were destabilized and crushed while others remained large and the material then became consolidated after to form the whole mass. According to [33] such larger elongated crystal sizes may result from higher cooling rates at higher ejection velocities which blocks are seen at the surface.
The columnar jointed trachyte in the Bambili areas are similar to that described in Cancarixphrea to magmatic volcano in Spain [34] , in which the columnar jointed rock formed the highest point on the volcano. Aspects of the BM are similar to some geological features along the CVL. Similar sub- vertical prismatic trachyte exists at the borders of the Lefo and Bambouto caldera [35] .
5. Conclusion
The Bambili maars are emplaced within trachytic rocks. The swampy BSM situated at a higher altitude than the lake (BNM). The main eruptive styles are effusive, strombolian and phreatomagmatic which formed deposits such as xenoliths, explosion breccias, bombs and blocks, polygonal columns and lava flows. The studied maars deposits revealed three stratigraphic units. Unit 1 was characterized by the presence of fine-grained fallouts (ash and lapilli size) with diffused bedding planes. Unit 2 was made up of non-stratified tephra deposits composed of coarse lapilli with variable fragment sizes of different petrographic types and Unit 3 was marked by coarse grained lapilli interbedded with lapilli tuff and mudstone with abundant juvenile fragments. The proposed model for the emplacement revealed that the maars were emplaced simultaneously from two adjacent vents. This was followed by a succession of lava flow and pyroclastic ejections. The finding of this work shall give a perspective for geochemical and geochronological analysis to be performed on these formation to expound on the sequences of events.