[1]
|
B.G.Park, A.G.Crosky and A.K.Hellier., Journal of material science 31, 1997, pp.1775-1788.
|
[2]
|
T.S.Srivastava. Journal of material science, 31, 1996, pp.1375-1388.
|
[3]
|
N. R. Prabhu Swamy, C. S. Ramesh and T. Chandrashekar, “Effect of Heat Treatment on Strength and Abrasive Wear Behaviour of Al6061–SiCp Composites”, Bull. Mater. Sci., Vol. 33, No. 1, 2010, pp.49–54.
|
[4]
|
J.A.Hooker and P.J.Doorber, Material Science and Technology. 6 , 2000, pp. 725-731
|
[5]
|
Sinclair I. and Gregson P.J., Mater. Sci Technol., vol. 3, 1997, 709.
|
[6]
|
T.W.Clyne, “Metal Matrix Composites: Matrices and Processing”, A Mortensen (ed.), Elsevier, 2001.
|
[7]
|
V.K.Lindroos and M.J.Talvitie, J. mater Proc. Tech, 53, 1995, pp. 273-278.
|
[8]
|
Manoj Singla, D. Deepak Dwivedi, Lakhvir Singh and Vikas Chawla, “Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite”, Journal of Minerals & Materials Characterization & Engineering, Vol.8, No.6, 2009, pp 455-467.
|
[9]
|
A.P. Sannino and H,J. Rack, “Dry sliding wear of discontinuously reinforced aluminium composites: review and discussion”, Wear, 189, 1995, pp.1-19.
|
[10]
|
Seteban Fernandez J, Model Rocio Fernandez, Vijande diaz R and Tucho Navarro R, “Abrasive Wear Analysis using Factorial Experimental Design”, Wear, Vol.255, 2003, pp. 38-43.
|
[11]
|
Hemanth Kumar T R, Swamy R P and Chandra-shekar T K, “Tribological Studies on Discontinuously Reinforced Metal Matrix Composite using Design of Experiment”, journal of manufacturing engineering, Vol.6, Issue 2, 2011, pp. 106-110.
|
[12]
|
Leisk G and Saigal, “A Statistical Approach to the Heat Treatment Optimization of Al-Al2O3 Particulate Composite”, Journal of Materials Engineering and Performance, Vol. 1(1), 45, 1992.
|
[13]
|
Roy K.R., A Primer on the Taguchi method, Van Nostrand Reinhold, New York, NY, 1990.
|
[14]
|
Ross P.J., Taguchi technique for quality engineering, McGraw-Hill, New York, NY, 1993.
|
[15]
|
Sahin Y., “The Prediction of Wear Resistance Model for the Metal Matrix Composites”, Wear, Vol. 258, Issues 11-12, 2005, pp. 1717-1722.
|
[16]
|
Taguchi, G., Konishi and S., “Taguchi Methods Orthogonal Arrays and Linear Graphs: Tools for Quality Engineering”, American Supplier Institute, Dearborn, 1987.
|
[17]
|
Taguchi, G., Taguchi on Robust Technology Development: Bringing Quality Engineering Upstream, ASME Press, New York, NY, 1993,
|
[18]
|
Uyyuru R.K, Surappa M.K. and Brusethang S, “Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al – Composite”, Wear, vol.206, 2006, pp.1248 – 1255.
|
[19]
|
C.S.Ramesh, Sheshadri S K and Iyer K J L, “A survey of aspects of wear of metals”, Indian Journal of Technology, Vol.29, 1991, pp. 179 – 185.
|
[20]
|
Palanikumar, K., “Application of Taguchi and Response Surface Methodologies for Surface Roughness in Machining Glass Fiber Reinforced Plastics by PCD Tooling”, The International Journal of Advanced Manufacturing Technology, Vol. 36, 2008, Nos. 1-2, pp. 19-27.
|
[21]
|
Montgomery, D.C. and Runger, G.C., Applied Statistics and Probability for Engineers, John Wiley & Sons, New York, NY, 1999.
|
[22]
|
Montgomery, D.C., Design and Analysis of Experiments, Wiley India Pvt. Ltd., New Delhi, 2007.
|
[23]
|
Basavarajappa,S. and Chandramohan,G., “Wear Studies on Metal Matrix Composites: a Taguchi Approach”, Journal of Materials Science and Technology, Vol. 21, No. 6, 2005, pp. 845- 850.
|
[24]
|
Hokkirigawa, K. and Kato, K., “An Experimental and Theoretical Investigation of Ploughing, Cutting and Wedge formation during Abrasive Wear”, Tribology International, Vol. 21, Issue 1, 1988, pp. 51-57.
|