[1]
|
D. Banabic, “Formability of Metallic Materials (Plastic Anisotropy, Formability Testing and Forming Limits),” Springer Verlag, Berlin, Germany, 2000.
|
[2]
|
R. Padmanabhan, M. C. Oliveir, J. L. Alves and L. F. Menezes, “Influence of Process Parameters on the Deep Drawing of Stainless Steel,” Finite Elements in Analysis and Design Archive, Vol. 43, No. 14, 2007, pp. 1062-1067.
|
[3]
|
J.-L. Batoz, H. Naceur and Y.-O. Guo, “Sheet Metal Stamping Analysis and Process Design Based on the Inverse Approach,” Proceeding of 10th Esaform Conference on Materials Forming, Zaragozza, Spain, 2007, pp. 1448-1453.
|
[4]
|
H. Naceur, A. Delamezier, J. L. Batoz, Y. O. Guo and C. K. Lenoir, “Some Improvements on the Optimum Process Design in Deep Drawing Using the Inverse Approach,” Journal of Materials Processing Techenology, Vol. 146, No. 2, 2004, pp. 250-262.
|
[5]
|
V. Paunoiu and D. Nicoara, “Simulation of Friction Phe-nomenon in Deep Drawing Process,” The Annals of Uni-versity “Dun?rea de Jos” of Gala?i Fascicle VIII, Tribol-ogy, 2003, pp. 407-412.
|
[6]
|
R. J. Comstock, K. Li and R. H. Wagoner, “Simulation of Axisymmetric Sheet Forming Tests,” Journal of Materials Processing Techenology, Vol. 117, No. 1, 2001, pp. 153-168.
|
[7]
|
W. G. Granzou, “Sheet Formability of Steel,” 10th Edition, ASM International, Metals Handbook, Materials Park, Ohio, 1990.
|
[8]
|
B. Kaftanoglu and J. M. Alexander, “An Investigation of the Erichsen Test,” Journal of the Institute of Metals, Vol. 90, 1961, pp. 457- 470.
|
[9]
|
T. Y. Olsen, “Machines for Ductility Testing,” Proceeding of the American Society of Materials, Vol. 20, 1920, pp. 398-403.
|
[10]
|
M. Akrout, M. B. Amar, C. Chaker and F. Dammak, “Numerical and Experimental Study of the Erichsen Test for Metal Stamping,” Advances in Production Engineering & Management, Vol. 3, No. 2, 2008, pp. 81-92.
|
[11]
|
A. Gavrus, V. Grolleau and S. Diot, “Experimental and Numerical Analysis of an Impacted Thin Aluminum Plate,” Proceedings of Structures Under Shock and Impact VII, Montreal, 2002, pp. 477-486.
|
[12]
|
A. Gavrus, “Identification Des Parametres Rheologiques Par Analyse Inverse,” Phd Thesis, ENSMP, Paris, 1997.
|
[13]
|
MARC User’s Manual, Analysis Research Corporation, 1997.
|