[1]
|
R. Xin, “Cleaner Production in China’s Pulp and Paper Industry,” Journal of Cleaner Production, Vol. 6, 1998, pp. 349-355.
|
[2]
|
Z. L. Zhao, Z. F. Yuan, Q. H. Cui and Y. N. Exergy, “Analysis of an WGZ220/6.8-1 Type Alkali Recovery Boiler,” Modern Applied Science, Vol. 2, 2010, pp. 23-30.
|
[3]
|
Z. L. Zhao, “Structure Analysis and Safety Assessment of Pressure Vessels,” Ph.D. Thesis, Wuhan University of Technology, Wuhan, 2006.
|
[4]
|
Z. M. Wang, J. S. Xiao, L. Zang, et al., “Heat Transfer and Thermal Stress Analysis of Heated Water tubes panel in a 1500 t/d Alkalinity Recycling Boiler,” Journal of Wuhan University of Technology, Vol. 28, 2007, pp. 38-40.
|
[5]
|
J. S. Xiao, B. Jiang, J. Liu, et al., “Microstructures and Mechanical Properties of Ceramic/Metal Gradient Thermal Barrier Coatings,” Journal of Wuhan University of Technology, Materials Science Edition, Vol. 18, 2003, pp. 38-40.
|
[6]
|
P. S. Ming, J. S. Xiao, J. Liu, et al., “Finite Element Analysis of Thermal Stresses in Ceramic/Metal Gradient Thermal Barrier Coatings” Journal of Wuhan University of Technology, Materials Science Edition, Vol. 20, 2005, pp. 44-47.
|
[7]
|
A. Saxena, P. K. Liaw, “Remaining Life Estimation of Boiler Pressure Parts-Crack Growth Studies,” EPRI Report, CS-4688, 1988.
|
[8]
|
S. Moaveni, “Finite Element Analysis Theory and Application with ANSYS,” 2nd Edition, Publishing House of Electronics Industry, Beijing, 2005, pp. 508-510.
|
[9]
|
Z. P. Zhu, J. F. Xue, Z. C. Li, et al., “The Common Materials for Boiler and Pressure Vessels,” Mechanical Industry Publishing House, Beijing, 2004, pp. 1-247.
|
[10]
|
А. М Гурвич and Н. В. Кузнедов, “Thermal Design of Boiler Units (Standard Method),” China Water Power Press, Beijing, 1960, pp. 52-256.
|
[11]
|
H. Hayakawa, M. Miyahara, A. Kanaya, et al., “Creep- fatigue Life Prediction for Ligament of Boiler Headers by Strain Range Partitioning Method,” Journal of the Society of Materials Science, Vol. 48, 1999, pp. 604-609.
|
[12]
|
A. J. Ramos, C. C. Rios and A. R. Varqas Jesus, “Fatigue
Life Prediction of Delayed Coke Drums,” Vision Tecnologia, Vol. 6, 1999, pp. 93-100.
|
[13]
|
S. S. Manson and G. R. Halford, “Practical Implementation of the Double Linear Damage Rule and Damage Curve Approach or Treating Cumulative Fatigue Damage,” International Journal of Fracture, Vol. 17, No. 2, 1981, pp. 169-192.
|
[14]
|
N. K. Mukhopadhyay and S. G. Chowdhury, “Remaining Life Estimation of a Service Exposed Economizer Tube,” Engineering Failure Analysis, Vol. 6, 1996, pp. 233-243.
|