|
[1]
|
Estimation of surface doses in the presence of an air gap under a bolus for a 6 MV clinical photon beam - a phantom study
Radiation and Environmental Biophysics,
2025
DOI:10.1007/s00411-025-01106-6
|
|
|
|
|
[2]
|
Usefulness of cast-type bolus produced by 3D printing for photon beam treatment of primary cutaneous lymphoma: A phantom experiment
International Journal of Radiation Research,
2025
DOI:10.61186/ijrr.23.1.69
|
|
|
|
|
[3]
|
Evaluation of the glottic surface dose in three‐dimensional conformal radiotherapy for early‐stage glottic cancer using a treatment planning system
Journal of Applied Clinical Medical Physics,
2025
DOI:10.1002/acm2.70011
|
|
|
|
|
[4]
|
Three‐Dimensional Printing in Breast Radiation Therapy: A Scoping Review of the Literature
Journal of Medical Radiation Sciences,
2025
DOI:10.1002/jmrs.70000
|
|
|
|
|
[5]
|
Comparative Study of Surface Conformity of Flexible Boluses Composed of Different Materials
Japanese Journal of Radiological Technology,
2025
DOI:10.6009/jjrt.25-1583
|
|
|
|
|
[6]
|
A comparison of two bolus types for radiotherapy following immediate breast reconstruction
Physical and Engineering Sciences in Medicine,
2025
DOI:10.1007/s13246-025-01604-3
|
|
|
|
|
[7]
|
Assessing the Reliability of 3D-Printed Custom Silicone Boluses in Radiotherapy: Thickness and Air Bubble Considerations
Applied Sciences,
2025
DOI:10.3390/app151910486
|
|
|
|
|
[8]
|
Streamlining custom bolus fabrication via 3D-to-2D unfolding using spectral mesh flattening
Biomedical Physics & Engineering Express,
2025
DOI:10.1088/2057-1976/ae09b1
|
|
|
|
|
[9]
|
Evaluation of superficial tumor treatment using radixact with the kilovoltage computed tomography system: dosimetric and clinical feasibility of super stuff bolus
Frontiers in Oncology,
2025
DOI:10.3389/fonc.2025.1707822
|
|
|
|
|
[10]
|
Feasibility of Customized Thermoplastic Patient-Specific Helmet Bolus for Scalp Irradiation Using Volumetric-Modulated Arc Therapy Planning
Technology in Cancer Research & Treatment,
2024
DOI:10.1177/15330338241241898
|
|
|
|
|
[11]
|
Evaluations of a Commercial CLEANBOLUS-WHITE for Clinical Application
Progress in Medical Physics,
2024
DOI:10.14316/pmp.2024.35.1.10
|
|
|
|
|
[12]
|
Quantify the Effect of Air Gap Errors on Skin Dose for Breast Cancer Radiotherapy
Technology in Cancer Research & Treatment,
2024
DOI:10.1177/15330338241258566
|
|
|
|
|
[13]
|
Evaluating the performance of thermoplastic 3D bolus used in radiation therapy
Applied Radiation and Isotopes,
2024
DOI:10.1016/j.apradiso.2024.111329
|
|
|
|
|
[14]
|
Characteristics of polylactic acid 3D-printed bolus for electron radiotherapy
3RD CONFERENCE ON INNOVATION IN TECHNOLOGY AND ENGINEERING SCIENCE 2022 (CITES2022): Innovation in Technology and Science for New Era of Engineering Professionalism,
2024
DOI:10.1063/5.0201105
|
|
|
|
|
[15]
|
Comprehensive clinical implementation, workflow, and FMEA of bespoke silicone bolus cast from 3D printed molds using open‐source resources
Journal of Applied Clinical Medical Physics,
2024
DOI:10.1002/acm2.14498
|
|
|
|
|
[16]
|
Superficial Dosimetry Study of the Frequency of Bolus Using in Volumetric Modulated Arc Therapy after Modified Radical Mastectomy
Technology in Cancer Research & Treatment,
2024
DOI:10.1177/15330338241264848
|
|
|
|
|
[17]
|
A Customized 3D-Printed Bolus for High-Risk Breast Cancer with Skin Infiltration: A Pilot Study
Current Oncology,
2024
DOI:10.3390/curroncol31090386
|
|
|
|
|
[18]
|
Exploring the impact of filament density on the responsiveness of 3D-Printed bolus materials for high-energy photon radiotherapy
Physica Medica,
2024
DOI:10.1016/j.ejmp.2024.104849
|
|
|
|
|
[19]
|
Clinical Application of a Customized 3D-Printed Bolus in Radiation Therapy for Distal Extremities
Life,
2023
DOI:10.3390/life13020362
|
|
|
|
|
[20]
|
Advances in 3D Printing
2023
DOI:10.5772/intechopen.109398
|
|
|
|
|
[21]
|
Feasibility of a Patient-Specific Bolus Using the Life-Casting Method for Radiation Therapy
Applied Sciences,
2023
DOI:10.3390/app13179977
|
|
|
|
|
[22]
|
Evaluations of patient-specific bolus fabricated by mold-and-cast method using computer numerical control machine tools
Journal of Radiation Research,
2023
DOI:10.1093/jrr/rrad075
|
|
|
|
|
[23]
|
Investigation of Effect of Air Gap between Surface and Bolus on Dose Distribution for 6 MV Photon Beam
Celal Bayar Üniversitesi Fen Bilimleri Dergisi,
2023
DOI:10.18466/cbayarfbe.1391876
|
|
|
|
|
[24]
|
Comparison of dose distribution 6 MV photon in breast cancer treatment using plasticine and silicone rubber boluses
International Journal of Scientific Research in Science and Technology,
2022
DOI:10.32628/IJSRST229359
|
|
|
|
|
[25]
|
Evaluation of the quality of fit of flexible bolus material created using 3D printing technology
Journal of Applied Clinical Medical Physics,
2022
DOI:10.1002/acm2.13490
|
|
|
|
|
[26]
|
3D-printed bolus ensures the precise postmastectomy chest wall radiation therapy for breast cancer
Frontiers in Oncology,
2022
DOI:10.3389/fonc.2022.964455
|
|
|
|
|
[27]
|
Technical note: Evaluation of a silicone‐based custom bolus for radiation therapy of a superficial pelvic tumor
Journal of Applied Clinical Medical Physics,
2022
DOI:10.1002/acm2.13538
|
|
|
|
|
[28]
|
Comparison of conventional versus customised Eurosil-4 Pink bolus for radiotherapy of the chest wall
PLOS ONE,
2022
DOI:10.1371/journal.pone.0267741
|
|
|
|
|
[29]
|
Development and dosimetric verification of 3D customized bolus in head and neck radiotherapy
Journal of Radiation Research,
2022
DOI:10.1093/jrr/rrac013
|
|
|
|
|
[30]
|
The air gap between bolus and skin affects dose distribution in helical and direct tomotherapy
Journal of Radiotherapy in Practice,
2021
DOI:10.1017/S1460396920000333
|
|
|
|
|
[31]
|
Development of Patient Specific Conformal 3D-Printed Devices for Dose Verification in Radiotherapy
Applied Sciences,
2021
DOI:10.3390/app11188657
|
|
|
|
|
[32]
|
Evaluating 3D-printed Bolus Compared to Conventional Bolus Types Used in External Beam Radiation Therapy
Current Medical Imaging Formerly Current Medical Imaging Reviews,
2021
DOI:10.2174/1573405617666210202114336
|
|
|
|
|
[33]
|
Determining tolerance levels for quality assurance of 3D printed bolus for modulated arc radiotherapy of the nose
Physical and Engineering Sciences in Medicine,
2021
DOI:10.1007/s13246-021-01054-7
|
|
|
|
|
[34]
|
Development of a transparent and flexible patient-specific bolus for total scalp irradiation
Radiological Physics and Technology,
2021
DOI:10.1007/s12194-021-00606-6
|
|
|
|
|
[35]
|
Characteristics of a bolus created using thermoplastic sheets for postmastectomy radiation therapy
Radiological Physics and Technology,
2021
DOI:10.1007/s12194-021-00618-2
|
|
|
|
|
[36]
|
Simplification and unfolding of 3D mesh models: review and evaluation of existing tools
Procedia CIRP,
2021
DOI:10.1016/j.procir.2021.05.023
|
|
|
|
|
[37]
|
The possibility of developing customized 3D-printed silicone hydrogel bolus for post-mastectomy radiotherapy
Journal of Radiation Research and Applied Sciences,
2021
DOI:10.1080/16878507.2021.1962629
|
|
|
|
|
[38]
|
Comparison of Dose Distribution Effects for Various Bolus Materials in Electron Conformal Radiotherapy
Celal Bayar Üniversitesi Fen Bilimleri Dergisi,
2020
DOI:10.18466/cbayarfbe.654782
|
|
|
|
|
[39]
|
Feasibility of using tungsten functional paper as a thin bolus for electron beam radiotherapy
Physical and Engineering Sciences in Medicine,
2020
DOI:10.1007/s13246-020-00910-2
|
|
|
|
|
[40]
|
Clinical Impact of the Bolus in Intensity-Modulated Radiotherapy and Volumetric-Modulated Arc Therapy for Stage I–II Nasal Natural Killer/T-Cell Lymphoma
Oncology Research and Treatment,
2020
DOI:10.1159/000504199
|
|
|
|
|
[41]
|
Assessing the fit of 3D printed bolus from CT, optical scanner and photogrammetry methods
Physical and Engineering Sciences in Medicine,
2020
DOI:10.1007/s13246-020-00861-8
|
|
|
|
|
[42]
|
Manufacturing a Functional Bolus Using a 3D printer in Radiation Therapy
Journal of Radiological Science and Technology,
2020
DOI:10.17946/JRST.2020.43.1.9
|
|
|
|
|
[43]
|
Skin dose enhancement from the application of skin-care creams using FF and FFF photon beams in radiotherapy: A Monte Carlo phantom evaluation
AIMS Bioengineering,
2020
DOI:10.3934/bioeng.2020008
|
|
|
|
|
[44]
|
Low-Cost iPhone-Assisted Processing to Obtain Radiotherapy Bolus Using Optical Surface Reconstruction and 3D-Printing
Scientific Reports,
2020
DOI:10.1038/s41598-020-64967-5
|
|
|
|
|
[45]
|
Enhancing benefits of bolus use through minimising the effect of air-gaps on dose distribution in photon beam radiotherapy
Journal of Radiotherapy in Practice,
2020
DOI:10.1017/S1460396920000047
|
|
|
|
|
[46]
|
Characterization and clinical validation of patient-specific three-dimensional printed tissue-equivalent bolus for radiotherapy of head and neck malignancies involving skin
Physica Medica,
2020
DOI:10.1016/j.ejmp.2020.08.010
|
|
|
|
|
[47]
|
eXaSkin: A novel high-density bolus for 6MV X-rays radiotherapy
Physica Medica,
2020
DOI:10.1016/j.ejmp.2020.09.002
|
|
|
|
|
[48]
|
Characterization of 3D-printed bolus produced at different printing parameters
Medical Dosimetry,
2020
DOI:10.1016/j.meddos.2020.10.005
|
|
|
|
|
[49]
|
Simple and Rapid Creation of Customized 3-dimensional Printed Bolus Using iPhone X True Depth Camera
Practical Radiation Oncology,
2019
DOI:10.1016/j.prro.2019.03.005
|
|
|
|
|
[50]
|
Evaluation of the Usefulness of Patient Customized Shielding Block Made with 3D Printer in the Skin Cancer Electron Beam Therapy
Journal of Radiological Science and Technology,
2019
DOI:10.17946/JRST.2019.42.6.447
|
|
|
|
|
[51]
|
Low-cost optical scanner and 3D printing technology to create lead shielding for radiotherapy of facial skin cancer: first clinical case series
Advances in Radiation Oncology,
2018
DOI:10.1016/j.adro.2018.02.003
|
|
|
|
|
[52]
|
Monte Carlo investigation on the effect of air gap under bolus in post-mastectomy radiotherapy
Physica Medica,
2018
DOI:10.1016/j.ejmp.2018.10.023
|
|
|
|
|
[53]
|
Dosimetric characterization of 3D printed bolus at different infill percentage for external photon beam radiotherapy
Physica Medica,
2017
DOI:10.1016/j.ejmp.2017.06.004
|
|
|
|
|
[54]
|
Efficacy of patient-specific bolus created using three-dimensional printing technique in photon radiotherapy
Physica Medica,
2017
DOI:10.1016/j.ejmp.2017.04.023
|
|
|
|
|
[55]
|
Intrapatient study comparing 3D printed bolus versus standard vinyl gel sheet bolus for postmastectomy chest wall radiation therapy
Practical Radiation Oncology,
2017
DOI:10.1016/j.prro.2017.12.008
|
|
|
|
|
[56]
|
The use of 3D printing within radiation therapy to improve bolus conformity: a literature review
Journal of Radiotherapy in Practice,
2017
DOI:10.1017/S1460396917000115
|
|
|
|
|
[57]
|
Customized 3D Printed Bolus for Breast Reconstruction for Modified Radical Mastectomy (MRM)
Progress in Medical Physics,
2016
DOI:10.14316/pmp.2016.27.4.196
|
|
|
|
|
[58]
|
A Patient-Specific Polylactic Acid Bolus Made by a 3D Printer for Breast Cancer Radiation Therapy
PLOS ONE,
2016
DOI:10.1371/journal.pone.0168063
|
|
|
|
|
[59]
|
An Evaluation of Two Approaches to Skin Bolus Design for Patients Receiving Radiotherapy for Head and Neck Cancers
Journal of Medical Imaging and Radiation Sciences,
2015
DOI:10.1016/j.jmir.2014.08.001
|
|
|
|
|
[60]
|
Comparative Study on the Surface Dose of Some Bolus Materials
International Journal of Medical Physics, Clinical Engineering and Radiation Oncology,
2015
DOI:10.4236/ijmpcero.2015.44041
|
|
|
|
|
[61]
|
A Customized Bolus Produced Using a 3-Dimensional Printer for Radiotherapy
PLoS ONE,
2014
DOI:10.1371/journal.pone.0110746
|
|
|
|
|
[62]
|
Characteristics of Photon Beam through a Handmade Build-Up Modifier as a Substitute of a Bolus
Progress in Medical Physics,
2014
DOI:10.14316/pmp.2014.25.4.225
|
|
|
|
|
[63]
|
Dosimetry for 131Cs and 125I seeds in solid water phantom using radiochromic EBT film
Applied Radiation and Isotopes,
2014
DOI:10.1016/j.apradiso.2014.06.014
|
|
|
|