[1]
|
J. L. Vossen and W. Kern, “Chock Film Processes Edit,” Academic Press, Cambridge.
|
[2]
|
R. Wei “Plasma Enhanced Magnetron Sputter Deposition of Ti-Si-C-N Based Nanocomposite Coatings,” Surface and Coatings Technology, Vol. 203, No. 5-7, 2008, pp. 538-544.
|
[3]
|
F. Kieckow, C. Kwietniewski, E. K. Tentardini, A. Reguly and I. J. R. Baumvol, “XPS and Ion Scattering Studies on Compound Formation and Interfacial Mixing in TiN/Ti Nanolayers on Plasma Nitrided Tool Steel,” Surface and Coatings Technology, Vol. 201, No. 6, 2006, pp. 3066-3073. doi:10.1016/j.surfcoat.2006.06.020
|
[4]
|
S. Cardinal, A. Malchère, V. Garnier and G. Fantozzi “Microstructure and Mechanical Properties of TiC-TiN Based Cermets for Tools Application,” International Journal of Refractory Metals & Hard Materials, Vol. 27. No. 3, 2009, pp. 521-527.
|
[5]
|
B. Subramanian, K. Ashok and M. Jayachandran, “Effect of Substrate Temperature on the Structural Properties of Magnetron Sputtered Titanium Nitride Thin Films with Brush Plated Nickel Interlayer on Mild Steel,” Applied Surface Science, Vol. 255, No. 5, 2008, pp. 2133-2138.
|
[6]
|
Y. K. Jeong, M. C. Kang, S. H. Kwon, K. H. Kim, H. G. Kim and J. S. Kim, “Tool Life of Nanocomposite Ti-Al-Si-N Coated End-Mill by Hybrid Coating System in High Speed Machining of Hardened AISI D2 Steel,” Current Applied Physics, Vol. 9, No. 1, Supplement 1, 2009, pp. S141-S144.
|
[7]
|
A. Ebrahimi and M. M. Moshksar, “Evaluation of Machinability in Turning of Microalloyed and Quenchedtempered Steels: Tool Wear, Statistical Analysis, Chip Morphology,” Journal of Materials Processing Technology, Vol. 209, No. 2, 19, 2009, pp. 910-921.
doi:10.1016/j.jmatprotec.2008.02.067
|
[8]
|
M. A. Yallese, K. Chaoui, N. Zeghib, L. Boulanouar and J. F. Rigal, “Hard Machining of Hardened Bearing Steel Using Cubic Boron Nitride Tool,” Journal of Materials Processing Technology, Vol. 209, No. 2, 2009, pp. 1092- 1104. doi:10.1016/j.jmatprotec.2008.03.014
|
[9]
|
E. Fergag, S. Achour, A. Harabi and K Mirouh, “Iron doped Titanium Nitride Film,” Ceramic Processing Science and Technology (Ceramic transactions, Vol. 51), International Conference on Ceramic Processing Science and Technology, April 1995, pp. 789-792.
|
[10]
|
E. Fergag, “Realization of One System of Pulverization Magnetron,” Application to titanium Nitrides, Magister Thesis, University of Constantine, Constantine, 1994.
|
[11]
|
Development of the Standards, ISO 3685, Tests life of the shaper tools to active part. International Standard.
www.upcomillas.es/periodicas
|
[12]
|
J. E. Sundgren, “Structure and Properties of TIN Coatings,” Thin Solid Films, Vol.128, No 1-2, 1985, pp. 21-44.
|
[13]
|
W. D. Sproul, “Very High Rate Reactive Sputtering of TIN, ZrN and HfN,” Thin Solid Films, Vol. 107, No. 2, 1983, pp. 141-147. doi:10.1016/0040-6090(83)90016-0
|