[1]
|
J. Zhong, H. Z. Yan, J. Duan, L. J. Xu, W. H. Wang and P. L. Chen, “Industrial Experiments and Findings on Chatter Marks of Steel Strip,” The Chinese Journal of Nonferrous Metals, Vol. 10, No. 2, 2000, pp. 291-296.
|
[2]
|
F. X. Hou, J. Zhang, J. G. Cao and X. L. Shi, “Review of Chatter Studies in Cold Rolling,” Journal of Iron and Steel Research, Vol. 19, No. 10, 2007, pp. 6-10.
|
[3]
|
F. X. Hou, J. Zhang, X. L. Shi, J. Q. Xie, C. Wang and F. Hu, “Research on the Forming Reason and Control of Chatter Marks on Backup Roll of Temper Mill,” Metallurgical Equipment, No. 158, 2006, pp. 37-40.
|
[4]
|
E. J. Robert and Q. Quan, “Chatter Dynamics in Sheet Rolling,” International Journal of Mechanical Sciences, Vol. 36, No. 7, 1994, pp. 617-630. doi:10.1016/0020- 7403(94)90017-5
|
[5]
|
Y. T. Wang, Y. Zang, D. P. Wu and Q. Qin, “Studies on the Cause of Vibration of CSP Rolling Mill,” Iron and Steel, Vol. 42, No. 2, 2008, pp. 68-73.
|
[6]
|
F. Li, K. J. Wang, Y. Y. Li and T. Y. Deng, “Cause Analysis and Control of Vibration Marks on Thin Steel Strip during Cold Rolling,” Heavy Machinery, Vol. 23, No. 1, 2009, pp. 32-35.
|
[7]
|
P. L. Chen and Z. J. Wang, “Cause and Control of Chatter Marks on Steel Strip Surface,” Iron and Steel, Vol. 41, No. 5, 2006, pp. 49-52. doi:10.1016/S1006-706X(06) 60077-0
|
[8]
|
Y. L. Wang, Y. G. Wang and S. B. Guo, “Cause Analysis of Vibration Marks on Cold Strips,” Baosteel Technology, Vol. 38, No. 3, 2007, pp. 24-28.
|
[9]
|
Z. L. Xiang, “The Production and Prevention of Vibration Track on the Aluminum Foil Surface,” Light Alloy Fabrication Technology, Vol. 31, No. 5, 2003, pp. 27-28.
|
[10]
|
J. J. Gasparic, “Vibration Analysis Identifies the Cause of Mill Chatter,” AISE Year Book, Vol. 12, No. 2, 1991, pp. 27-29.
|