[1]
|
Wang, F., Li, R., Ding, C., Tang, W., Wang, Y., Xu, S., Yu, R. and Wu, Y. (2017) Recent Progress on the Hydrogen Storage Properties of ZrCo-Based Alloys Applied in International Thermonuclear Experimental Reactor (ITER). Progress in Natural Science: Materials International, 27, 58-65.
https://doi.org/10.1016/j.pnsc.2016.12.018
|
[2]
|
Lin, H.J., Li, H.W., Shao, H., Lu, Y. and Asano, K. (2020) In Situ Measurement Technologies on Solid-State Hydrogen Storage Materials: A Review. Materials Today Energy, 17, Article ID: 100463. https://doi.org/10.1016/j.mtener.2020.100463
|
[3]
|
Kojima, Y. (2019) Hydrogen Storage Materials for Hydrogen and Energy Carriers. International Journal of Hydrogen Energy, 44, 18179-18192.
https://doi.org/10.1016/j.ijhydene.2019.05.119
|
[4]
|
Rong, M., Wang, F., Wang, J., Wang, Z. and Zhou, H. (2017) Effect of Heat Treatment on Hydrogen Storage Properties and Thermal Stability of V68Ti20Cr12 Alloy. Progress in Natural Science: Materials International, 27, 543-549.
https://doi.org/10.1016/j.pnsc.2017.08.012
|
[5]
|
Rusman, N.A.A. and Dahari, M. (2016) A Review on the Current Progress of Metal Hydrides Material for Solid-State Hydrogen Storage Applications. International Journal of Hydrogen Energy, 41, 12108-12126.
https://doi.org/10.1016/j.ijhydene.2016.05.244
|
[6]
|
Sakintuna, B., Lamaridarkrim, F. and Hirscher, M. (2007) Metal Hydride Materials for Solid Hydrogen Storage: A review. International Journal of Hydrogen Energy, 32, 1121-1140. https://doi.org/10.1016/j.ijhydene.2006.11.022
|
[7]
|
2019) US DOE Funding Fuel Cell, Hydrogen Projects. Fuel Cells Bulletin, 2019, 13-14. https://doi.org/10.1016/S1464-2859(19)30391-8
|
[8]
|
Tarasov, B.P., Fursikov, P.V., Volodin, A.A., Bocharnikov, M.S., Shimkus, Y.Y., Kashin, A.M., Yartys, V.A., Chidziva, S., Pasupathi, S. and Lototskyy, M.V. (2020) Metal Hydride Hydrogen Storage and Compression Systems for Energy Storage Technologies. International Journal of Hydrogen Energy.
https://doi.org/10.1016/j.ijhydene.2020.07.085
|
[9]
|
Boateng, E. and Chen, A. (2020) Recent Advances in Nanomaterial-Based Solid-State Hydrogen Storage. Materials Today Advances, 6, Article ID: 100022.
https://doi.org/10.1016/j.mtadv.2019.100022
|
[10]
|
Ren, J., Musyoka, N.M., Langmi, H.W., Mathe, M. and Liao, S. (2017) Current Research Trends and Perspectives on Materials-Based Hydrogen Storage Solutions: A Critical Review. International Journal of Hydrogen Energy, 42, 289-311.
https://doi.org/10.1016/j.ijhydene.2016.11.195
|
[11]
|
Pickering, L., Lototskyy, M.V., Wafeeq Davids, M., Sita, C. and Linkov, V. (2018) Induction Melted AB2-Type Metal Hydrides for Hydrogen Storage and Compression Applications. Materials Today: Proceedings, 5, 10470-10478.
https://doi.org/10.1016/j.matpr.2017.12.378
|
[12]
|
Nei, J., Young, K., Salley, S.O. and Ng, K.Y.S. (2012) Effects of Annealing on Zr8Ni19X2 (X = Ni, Mg, Al, Sc, V, Mn, Co, Sn, La, and Hf): Hydrogen Storage and Electrochemical Properties. International Journal of Hydrogen Energy, 37, 8418-8427. https://doi.org/10.1016/j.ijhydene.2012.02.066
|
[13]
|
Kumar, S., Jain, A., Ichikawa, T., Kojima, Y. and Dey, G.K. (2017) Development of Vanadium Based Hydrogen Storage Material: A Review. Renewable and Sustainable Energy Reviews, 72, 791-800. https://doi.org/10.1016/j.rser.2017.01.063
|
[14]
|
Guo, X., Wang, S., Liu, X., Li, Z., Lü, F., Mi, J., Hao, L. and Jiang, L. (2011) Laves Phase Hydrogen Storage Alloys for Super-High-Pressure Metal Hydride Hydrogen Compressors. Rare Metals, 30, 227-231. https://doi.org/10.1007/s12598-011-0373-7
|
[15]
|
Zhang, Y., Wang, H., Zhai, T., Yang, T., Qi, Y. and Zhao, D. (2014) Hydrogen Storage Characteristics of the Nanocrystalline and Amorphous Mg-Nd-Ni-Cu-Based Alloys Prepared by Melt Spinning. International Journal of Hydrogen Energy, 39, 3790-3798. https://doi.org/10.1016/j.ijhydene.2013.12.139
|
[16]
|
Lv, W., Shi, Y., Deng, W., Yuan, J., Yan, Y. and Wu, Y. (2016) Effect of Mg Substitution for La on Microstructure, Hydrogen Storage and Electrochemical Properties of La1−xMgxNi3.5 (x = 0.20, 0.23, 0.25 at%) Alloys. Progress in Natural Science: Materials International, 26, 177-181. https://doi.org/10.1016/j.pnsc.2016.03.008
|
[17]
|
Huot, J. and Tousignant, M. (2017) Hydrogen Sorption Enhancement in Cold-Rolled and Ball-Milled CaNi5. Journal of Materials Science, 52, 11911-11918.
https://doi.org/10.1007/s10853-017-1250-z
|
[18]
|
Emami, H., Edalati, K., Matsuda, J., Akiba, E. and Horita, Z. (2015) Hydrogen Storage Performance of TiFe after Processing by Ball Milling. Acta Materialia, 88, 190-195. https://doi.org/10.1016/j.actamat.2014.12.052
|
[19]
|
Chen, X.Y., Chen, R.R., Ding, X., Fang, H.Z., Guo, J.J., Ding, H.S., Su, Y.Q. and Fu, H.Z. (2018) Crystal Structure and Hydrogen Storage Properties of Ti-V-Mn Alloys. International Journal of Hydrogen Energy, 43, 6210-6218.
https://doi.org/10.1016/j.ijhydene.2018.02.009
|
[20]
|
Zhou, H.Y., Wang, F., Wang, J., Wang, Z.M., Yao, Q.R., Deng, J.Q., Tang, C.Y. and Rao, G.H. (2014) Hydrogen Storage Properties and Thermal Stability of V35Ti20Cr45 Alloy by Heat Treatment. International Journal of Hydrogen Energy, 39, 14887-14895.
https://doi.org/10.1016/j.ijhydene.2014.07.054
|
[21]
|
Shahi, R.R., Yadav, T.P., Shaz, M.A., Srivastava, O.N. and van Smaalen, S. (2011) Effect of Processing Parameter on Hydrogen Storage Characteristics of As Quenched Ti45Zr38Ni17 Quasicrystalline Alloys. International Journal of Hydrogen Energy, 36, 592-599. https://doi.org/10.1016/j.ijhydene.2010.10.031
|
[22]
|
Hu, F., Wen, Y., Chan, K.C., Yue, T.M., Zhou, Y.Z., Zhu, S.L. and Yang, X.J. (2015) Synthesis of Self-Detached Nanoporous Titanium-Based Metal Oxide. Journal of Solid State Chemistry, 229, 78-86. https://doi.org/10.1016/j.jssc.2015.05.021
|
[23]
|
Wang, W., Zhang, X. and Sun, J. (2018) Phase Stability and Tensile Behavior of Metastable β Ti-V-Fe and Ti-V-Fe-Al Alloys. Materials Characterization, 142, 398-405. https://doi.org/10.1016/j.matchar.2018.06.008
|
[24]
|
Itoh, H., Arashima, H., Kubo, K., Kabutomori, T. and Ohnishi, K. (2005) Improvement of Cyclic Durability of BCC Structured Ti-Cr-V Alloys. Journal of Alloys and Compounds, 404-406, 417-420. https://doi.org/10.1016/j.jallcom.2004.12.175
|
[25]
|
Wang, X.Y., Zhang, S.L., Feng, S.D., Qi, L. and Liu, R.P. (2018) Effect of Pressure on the Structure of Ti75Al25 Alloy during Rapid-Quenching Process. Journal of Non-Crystalline Solids, 502, 136-141. https://doi.org/10.1016/j.jnoncrysol.2018.08.001
|
[26]
|
Baster, D., Takasaki, A., Kuroda, C., Hanc, E., Lee, S.-H., Świerczek, K., Szmyd, J.S., Kim, J.-Y. and Molenda, J. (2013) Effect of Mechanical Milling on Electrochemical Properties of Ti45Zr38-xNi17+x (x = 0, 8) Quasicrystals Produced by Rapid-Quenching. Journal of Alloys and Compounds, 580, S238-S242.
https://doi.org/10.1016/j.jallcom.2013.03.272
|
[27]
|
Liu, B., Zhang, Y., Mi, G., Zhang, Z. and Wang, L. (2009) Crystallographic and ElectroChemical Characteristics of Ti-Zr-Ni-Pd Quasicrystalline Alloys. International Journal of Hydrogen Energy, 34, 6925-6929.
https://doi.org/10.1016/j.ijhydene.2009.06.044
|
[28]
|
Takasaki, A. and Kelton, K.F. (2002) High-Pressure Hydrogen Loading in Ti45Zr38Ni17 Amorphous and Quasicrystal Powders Synthesized by Mechanical Alloying. Journal of Alloys and Compounds, 347, 295-300.
https://doi.org/10.1016/S0925-8388(02)00782-X
|
[29]
|
Ouyang, L., Huang, J., Wang, H., Liu, J. and Zhu, M. (2017) Progress of Hydrogen Storage Alloys for Ni-MH Rechargeable Power Batteries in Electric Vehicles: A Review. Materials Chemistry and Physics, 200, 164-178.
https://doi.org/10.1016/j.matchemphys.2017.07.002
|
[30]
|
Liu, H., Zhai, X., Li, Z., Tao, X., Liu, W. and Zhao, J. (2018) Improved Electrochemical Hydrogen Storage Performance of Ti49Zr26Ni25 Quasicrystal Alloy by Doping with Mesoporous α-Fe2O3 Particles. International Journal of Hydrogen Energy, 43, 7447-7455. https://doi.org/10.1016/j.ijhydene.2018.02.149
|
[31]
|
Tian, F. and Li, N. (2020) Investigation of the Feasibility of A Novel Heat Stamping Process for Producing Complex-Shaped Ti-6Al-4V Panel Components. Procedia Manufacturing, 47, 1374-1380. https://doi.org/10.1016/j.promfg.2020.04.267
|
[32]
|
Shukla, S. and Bajpai, V. (2020) Effect of Cryogenic Quenching on Microstructure and Microhardness of Ti-6Al-4V Alloy. Materials Letters, 267, Article ID: 127532.
https://doi.org/10.1016/j.matlet.2020.127532
|
[33]
|
Kumar, M., Xiong, X., Wan, Z., Sun, Y., Tsang, D.C.W., Gupta, J., Gao, B., Cao, X., Tang, J. and Ok, Y.S. (2020) Ball Milling as a Mechanochemical Technology for Fabrication of Novel Biochar Nanomaterials. Bioresource Technology, 312, Article ID: 123613. https://doi.org/10.1016/j.biortech.2020.123613
|
[34]
|
Lee, J.-H., Park, H.-K., Kim, J.-H., Jang, J.-H., Hong, S.-K. and Oh, I.-H. (2020) Constitutive Behavior and Microstructural Evolution in Ti-Al-Si Ternary Alloys Processed by Mechanical Milling and Spark Plasma Sintering. Journal of Materials Research and Technology, 9, 2247-2258. https://doi.org/10.1016/j.jmrt.2019.12.056
|
[35]
|
Khajavi, S., Rajabi, M. and Huot, J. (2019) Effect of Cold Rolling and Ball Milling on First Hydrogenation of Ti0.5Zr0.5 (Mn1−xFex) Cr1, x = 0, 0.2, 0.4. Journal of Alloys and Compounds, 775, 912-920. https://doi.org/10.1016/j.jallcom.2018.10.179
|
[36]
|
Das, B. and Patra, A. (2020) Fabrication of W-Ti-Mo Alloys and Its Microstructure, Mechanical Properties Prepared by Mechanical Alloying. Materials Today: Proceedings, 26, 2845-2852. https://doi.org/10.1016/j.matpr.2020.02.592
|
[37]
|
Vega, L.E.R., Leiva, D.R., Leal Neto, R.M., Silva, W.B., Silva, R.A., Ishikawa, T.T., Kiminami, C.S. and Botta, W.J. (2020) Improved Ball Milling Method for the Synthesis of Nanocrystalline TiFe Compound Ready to Absorb Hydrogen. International Journal of Hydrogen Energy, 45, 2084-2093.
https://doi.org/10.1016/j.ijhydene.2019.11.035
|
[38]
|
Ariga, Y., Takasaki, A., Kimijima, T. and Świerczek, K. (2015) Electrochemical Properties of Ti49Zr26Ni25−xPdx (x = 0-6) Quasicrystal Electrodes Produced by Mechanical Alloying. Journal of Alloys and Compounds, 645, S152-S154.
https://doi.org/10.1016/j.jallcom.2015.01.114
|
[39]
|
Sun, F., Yan, M.-Y., Liu, X.-P., Ye, J.-H., Li, Z.-N., Wang, S.-M. and Jiang, L.-J. (2015) Effect of N2, CH4 and O2 on Hydrogen Storage Performance of 2LiNH2 + MgH2 system. International Journal of Hydrogen Energy, 40, 6173-6179.
https://doi.org/10.1016/j.ijhydene.2015.03.084
|
[40]
|
Zhang, T.B., Yang, X.W., Li, J.S., Hu, R., Xue, X.Y. and Fu, H.Z. (2012) On the Poisoning Effect of O2 and N2 for the Zr0.9Ti0.1V2 Hydrogen Storage Alloy. Journal of Power Sources, 202, 217-224. https://doi.org/10.1016/j.jpowsour.2011.12.002
|
[41]
|
Sandrock, G. (1999) A Panoramic Overview of Hydrogen Storage Alloys from AGas Reaction Point of View. Journal of Alloys and Compounds, 293-295, 877-888.
https://doi.org/10.1016/S0925-8388(99)00384-9
|
[42]
|
Liu, H., Liu, W., Sun, Y., Chen, P., Zhao, J., Guo, X. and Su, Z. (2020) Preparation and Electrochemical Hydrogen Storage Properties of Ti49Zr26Ni25 Alloy Covered with Porous Polyaniline. International Journal of Hydrogen Energy, 45, 11675-11685.
https://doi.org/10.1016/j.ijhydene.2020.02.115
|
[43]
|
Lin, J., Sun, L., Cao, Z., Yin, D., Liang, F., Wu, Y. and Wang, L. (2016) A Novel Method to Prepare Ti1.4V0.6Ni Alloy Covered with Carbon and Nanostructured Co3O4, and Its Good Electrochemical Hydrogen Storage Properties as Negative Electrode Material for Ni-MH battery. Electrochimica Acta, 222, 1716-1723.
https://doi.org/10.1016/j.electacta.2016.11.163
|
[44]
|
Zadorozhnyy, V., Klyamkin, S., Zadorozhnyy, M., Bermesheva, O. and Kaloshkin, S. (2012) Hydrogen Storage Nanocrystalline TiFe Intermetallic Compound: Synthesis by Mechanical Alloying and Compacting. International Journal of Hydrogen Energy, 37, 17131-17136. https://doi.org/10.1016/j.ijhydene.2012.08.078
|
[45]
|
Abe, M. and Kuji, T. (2007) Hydrogen Absorption of TiFe Alloy Synthesized by Ball Milling and Post-Annealing. Journal of Alloys and Compounds, 446-447, 200-203.
https://doi.org/10.1016/j.jallcom.2006.12.063
|
[46]
|
Berdonosova, E.A., Klyamkin, S.N., Zadorozhnyy, V.Y., Zadorozhnyy, M.Y., Geodakian, K.V., Gorshenkov, M.V. and Kaloshkin, S.D. (2016) Calorimetric Study of Peculiar Hydrogenation Behavior of Nanocrystalline TiFe. Journal of Alloys and Compounds, 688, 1181-1185. https://doi.org/10.1016/j.jallcom.2016.07.145
|
[47]
|
Hotta, H., Abe, M., Kuji, T. and Uchida, H. (2007) Synthesis of Ti-Fe Alloys by Mechanical Alloying. Journal of Alloys and Compounds, 439, 221-226.
https://doi.org/10.1016/j.jallcom.2006.05.137
|
[48]
|
Zaluski, L., Tessier, P., Ryan, D.H., Doner, C.B., Zaluska, A., Ström-Olsen, J.O., Trudeau, M.L. and Schulz, R. (1993) Amorphous and Nanocrystalline Fe-Ti Prepared by Ball Milling. Journal of Materials Research, 8, 3059-3068.
https://doi.org/10.1557/JMR.1993.3059
|
[49]
|
Falcão, R.B., Dammann, E.D.C.C., Rocha, C.J., Durazzo, M., Ichikawa, R.U., Martinez, L.G., Botta, W.J. and Leal Neto, R.M. (2018) An Alternative Route to Produce Easily Activated Nanocrystalline TiFe Powder. International Journal of Hydrogen Energy, 43, 16107-16116. https://doi.org/10.1016/j.ijhydene.2018.07.027
|
[50]
|
Haraki, T., Oishi, K., Uchida, H., Miyamoto, Y., Abe, M., Kokaji, T. and Uchida, S. (2008) Properties of Hydrogen Absorption by Nano-Structured FeTi Alloys. International Journal of Materials Research, 99, 507-512.
https://doi.org/10.3139/146.101669
|
[51]
|
Vega, L.E.R., Leiva, D.R., Leal Neto, R.M., Silva, W.B., Silva, R.A., Ishikawa, T.T., Kiminami, C.S. and Botta, W.J. (2018) Mechanical Activation of TiFe for Hydrogen Storage by Cold Rolling under Inert Atmosphere. International Journal of Hydrogen Energy, 43, 2913-2918. https://doi.org/10.1016/j.ijhydene.2017.12.054
|
[52]
|
Edalati, K., Matsuda, J., Yanagida, A., Akiba, E. and Horita, Z. (2014) Activation of TiFe for Hydrogen Storage by Plastic Deformation Using Groove Rolling and High-Pressure Torsion: Similarities and Differences. International Journal of Hydrogen Energy, 39, 15589-15594. https://doi.org/10.1016/j.ijhydene.2014.07.124
|
[53]
|
Manna, J., Tougas, B. and Huot, J. (2018) Mechanical Activation of Air Exposed TiFe+4wt% Zr Alloy for Hydrogenation by Cold Rolling and Ball Milling. International Journal of Hydrogen Energy, 43, 20795-20800.
https://doi.org/10.1016/j.ijhydene.2018.09.096
|
[54]
|
Leng, H., Yan, P., Han, X., Liu, W., Liu, Q. and Li, Q. (2020) Microstructural Characterization and Hydrogenation Performance of ZrxV5Fe(x=3-9) Alloys. Progress in Natural Science: Materials International, 30, 229-238.
https://doi.org/10.1016/j.pnsc.2020.01.002
|
[55]
|
de Araujo-Silva, R.A., Jorge Jr., A.M., Vega, L.E.R., Leal Neto, R.M., Leiva, D.R. and Botta, W.J. (2019) Hydrogen Desorption/Absorption Properties of the Extensively Cold Rolled β Ti-40Nb Alloy. International Journal of Hydrogen Energy, 44, 20133-20144. https://doi.org/10.1016/j.ijhydene.2019.05.211
|
[56]
|
Radhi, H.N., Aljassani, A.M.H. and Mohammed, M.T. (2020) Effect of ECAP on Microstructure, Mechanical and Tribological Properties of Aluminum and Brass Alloys: A Review. Materials Today: Proceedings, 26, 2302-2307.
https://doi.org/10.1016/j.matpr.2020.02.497
|
[57]
|
Polyakova, V.V., Semenova, I.P., Polyakov, A.V., Magomedova, D.K., Huang, Y. and Langdon, T.G. (2017) Influence of Grain Boundary Misorientations on the Mechanical Behavior of ANear-α Ti-6Al-7Nb Alloy Processed by ECAP. Materials Letters, 190, 256-259. https://doi.org/10.1016/j.matlet.2016.12.083
|
[58]
|
Huang, S.-J., Chiu, C., Chou, T.-Y. and Rabkin, E. (2018) Effect of Equal Channel Angular Pressing (ECAP) on Hydrogen Storage Properties of Commercial Magnesium Alloy AZ61. International Journal of Hydrogen Energy, 43, 4371-4380.
https://doi.org/10.1016/j.ijhydene.2018.01.044
|
[59]
|
Bartha, K., Veverková, A., Strásky, J., Vesely, J., Minárik, P., Corrêa, C.A., Polyakova, V., Semenova, I. and Janeček, M. (2020) Effect of the Severe Plastic Deformation by ECAP on Microstructure and Phase Transformations in Ti-15Mo alloy. Materials Today Communications, 22, Article ID: 100811.
https://doi.org/10.1016/j.mtcomm.2019.100811
|
[60]
|
Czerwinski, A., Lapovok, R., Tomus, D., Estrin, Y. and Vinogradov, A. (2011) The Influence of Temporary Hydrogenation on ECAP Formability and Low Cycle Fatigue Life of CP Titanium. Journal of Alloys and Compounds, 509, 2709-2715.
https://doi.org/10.1016/j.jallcom.2010.11.188
|
[61]
|
Verleysen, P. and Lanjewar, H. (2020) Dynamic High-Pressure Torsion: A Novel Technique for Dynamic Severe Plastic Deformation. Journal of Materials Processing Technology, 276, Article ID: 116393.
https://doi.org/10.1016/j.jmatprotec.2019.116393
|
[62]
|
Zhilyaev, A.P. and Langdon, T.G. (2008) Using High-Pressure Torsion for Metal Processing: Fundamentals and Applications. Progress in Materials Science, 53, 893-979. https://doi.org/10.1016/j.pmatsci.2008.03.002
|
[63]
|
Yang, J., Wang, G., Park, J.M. and Kim, H.S. (2019) Microstructural Behavior and Mechanical Properties of Nanocrystalline Ti-22Al-25Nb Alloy Processed by High-Pressure Torsion. Materials Characterization, 151, 129-136.
https://doi.org/10.1016/j.matchar.2019.02.029
|
[64]
|
Wei, D.-X., Koizumi, Y., Nagasako, M. and Chiba, A. (2017) Refinement of Lamellar Structures in Ti-Al Alloy. Acta Materialia, 125, 81-97.
https://doi.org/10.1016/j.actamat.2016.11.045
|
[65]
|
Shuitcev, A., Gunderov, D.V., Sun, B., Li, L., Valiev, R.Z. and Tong, Y.X. (2020) Nanostructured Ti29.7Ni50.3Hf20 High Temperature Shape Memory Alloy Processed by High-Pressure Torsion. Journal of Materials Science & Technology, 52, 218-225.
https://doi.org/10.1016/j.jmst.2020.01.065
|
[66]
|
Jia, J., Zhang, K. and Jiang, S. (2014) Microstructure and Mechanical Properties of Ti-22Al-25Nb Alloy Fabricated by Vacuum Hot Pressing Sintering. Materials Science and Engineering: A, 616, 93-98. https://doi.org/10.1016/j.msea.2014.08.018
|
[67]
|
Niu, H.Z., Chen, Y.F., Zhang, D.L., Zhang, Y.S., Lu, J.W., Zhang, W. and Zhang, P.X. (2016) Fabrication of a Powder Metallurgy Ti2AlNb-Based Alloy by Spark Plasma Sintering and Associated Microstructure Optimization. Materials & Design, 89, 823-829. https://doi.org/10.1016/j.matdes.2015.10.042
|
[68]
|
Lu, Z.-G., Wu, J., Guo, R.-P., Xu, L. and Yang, R. (2017) Hot Deformation Mechanism and Ring Rolling Behavior of Powder Metallurgy Ti2AlNb Intermetallics. Acta Metallurgica Sinica (English Letters), 30, 621-629.
https://doi.org/10.1007/s40195-017-0583-6
|
[69]
|
Sim, K.H., Wang, G., Ju, J.M., Yang, J. and Li, X. (2017) Microstructure and Mechanical Properties of A Ti-22Al-25Nb Alloy Fabricated from Elemental Powders by Mechanical Alloying and Spark Plasma Sintering. Journal of Alloys and Compounds, 704, 425-433. https://doi.org/10.1016/j.jallcom.2017.01.354
|
[70]
|
Shagiev, M.R., Galeyev, R.M., Valiakhmetov, O.R. and Safiullin, R.V. (2008) Improved Mechanical Properties of Ti2AlNb-Based Intermetallic Alloys and Composites. Advanced Materials Research, 59, 105-108.
https://doi.org/10.4028/www.scientific.net/AMR.59.105
|
[71]
|
Mao, Y., Yang, S., Wu, C., Luo, L. and Chen, Y. (2017) Preparation of
(FeV80)48Ti26+xCr26(x=0-4) Alloys by the Hydride Sintering Method and Their Hydrogen Storage Performance. Journal of Alloys and Compounds, 705, 533-538.
https://doi.org/10.1016/j.jallcom.2017.02.166
|
[72]
|
El-Shafie, M., Kambara, S. and Hayakawa, Y. (2019) Hydrogen Production Technologies Overview. Journal of Power and Energy Engineering, 7, 107-154.
https://doi.org/10.4236/jpee.2019.71007
|
[73]
|
Rosen, M. (2015) The Prospects for Renewable Energy through Hydrogen Energy Systems. Journal of Power and Energy Engineering, 3, 373-377.
https://doi.org/10.4236/jpee.2015.34050
|
[74]
|
Ren, L., Zhou, S. and Ou, X. (2020) Life-Cycle Energy Consumption and Greenhouse-Gas Emissions of Hydrogen Supply Chains for Fuel-Cell Vehicles in China. Energy, 209, 118482. https://doi.org/10.1016/j.energy.2020.118482
|
[75]
|
Thomas, J.M., Edwards, P.P., Dobson, P.J. and Owen, G.P. (2020) Decarbonising Energy: The Developing International Activity in Hydrogen Technologies and Fuel Cells. Journal of Energy Chemistry, 51, 405-415.
https://doi.org/10.1016/j.jechem.2020.03.087
|