|
[1]
|
Performance Analysis of Different Dielectric on Electrical Discharge Machined AA8011/SiC/Si3N4 Composites using Taguchi Coupled ELECTRE Approach
|
|
Silicon,
2024 |
|
|
|
|
[2]
|
Experimental Investigation on the Impact of Graphite Electrodes Grain Size on Technological Parameters and Surface Texture of Hastelloy C-22 after Electrical …
|
|
Świercz, R Świercz - Materials,
2024 |
|
|
|
|
[3]
|
OPTIMIZATION OF CIRCULARITY ERROR WITH TAGUCHI FOR SAE-4130 CONSIDERING SURFACE RESPONSES IN WIRE-EDM MACHINING
|
|
JOURNAL OF BASIC SCIENCE AND …,
2024 |
|
|
|
|
[4]
|
KHẢO SÁT KẾT QUẢ GIA CÔNG EDM TRÊN ĐIỆN CỰC ĐỒNG ĐỎ VÀ THAN CHÌ ĐỐI VỚI THÉP P20
|
|
2024 |
|
|
|
|
[5]
|
Salient aspects on micro-electrical discharge machining of nitinol for cardiovascular applications
|
|
Journal of …,
2023 |
|
|
|
|
[6]
|
Experimental feasibility study of coconut oil for sustainable electrical discharge machining on Hastelloy B2
|
|
Sādhanā,
2023 |
|
|
|
|
[7]
|
Effect of copper, tungsten copper and tungsten carbide tools on micro-electric discharge drilling of Ti–6Al–4V alloy
|
|
Journal of Materials …,
2023 |
|
|
|
|
[8]
|
Multi objective optimization of parameters in EDM of Mirrax steel
|
|
Materials and Manufacturing Processes,
2023 |
|
|
|
|
[9]
|
Bor Alaşımlı Çeliklerin Elektro Erozyonla İşleme Parametrelerinin Deneysel Araştırılması
|
|
El-Cezeri,
2022 |
|
|
|
|
[10]
|
Numerical study of the effect of EDM machining parameters on the quality of machined s rfaces
|
|
Doctoral dissertation,
2022 |
|
|
|
|
[11]
|
Influence of Rotary Assisted Electrical Discharge Machining of 17-4PH Stainless Steel Using Taguchi Technique
|
|
Indian Journal of …,
2022 |
|
|
|
|
[12]
|
Study of the performance of Cu-Gr composite tool during EDM of AISI 1020 mild steel
|
|
Materials Today …,
2022 |
|
|
|
|
[13]
|
Comparative study of copper and graphite electrodes performance in Electrical Discharge Machining (EDM) of die steel
|
|
Materials Today: Proceedings,
2022 |
|
|
|
|
[14]
|
Experimental Investigation of Electro Erosion Machining Parameters of Boron Alloy Steels
|
|
2022 |
|
|
|
|
[15]
|
A Review of Studies on Performance Evaluation of Electro Discharge Machine
|
|
SAMRIDDHI: A Journal of …,
2022 |
|
|
|
|
[16]
|
Modelling of spark erosion machining process for hybrid metal matrix composite by artificial neural network approach
|
|
AIP Conference …,
2021 |
|
|
|
|
[17]
|
Study of Electrical Discharge Machining Parameters on Stainless Steel Using Copper Tool Electrode and Its Effect on the Structure and Electrochemical Properties
|
|
2021 |
|
|
|
|
[18]
|
Optimization of Surface Roughness of AISI P20 on Electrical Discharge Machining Sinking Process using Taguchi Method
|
|
2021 |
|
|
|
|
[19]
|
Comparison of EDM and ECM machined AISI 304 steel: Surface roughness, hardness and morphological characteristics
|
|
2021 |
|
|
|
|
[20]
|
Study of Electrical Discharge Machining Parameters on Stainless Steel Using Copper Tool Electrode and Its Effect on the Structure and Electrochemical …
|
|
Amri… - Acta Chimica …,
2021 |
|
|
|
|
[21]
|
MIRRAX KALIP ÇELİĞİNİN ELEKTRO EROZYON YÖNTEMİ İLE İŞLENEBİLİRLİĞİNİN İNCELENMESİ
|
|
2021 |
|
|
|
|
[22]
|
Material removal rate in electric discharge machining with aluminum tool electrode for Ti-6Al-4V titanium alloy
|
|
2020 |
|
|
|
|
[23]
|
7 Material Removal Rate and Surface Roughness Analyses of ED-Machined SUS-316L with Tungsten Tool
|
|
2020 |
|
|
|
|
[24]
|
EDM Die Sinking of Tool Steel: Performance Evaluation of Electrode Materials for Surface Roughness and Dimensional Accuracy
|
|
2020 |
|
|
|
|
[25]
|
Effects of Process Parameters on the Machining Process in Die-Sinking EDM of Alloyed Tool Steel
|
|
2020 |
|
|
|
|
[26]
|
1 A Critical Review on
|
|
2020 |
|
|
|
|
[27]
|
Material Removal Rate and Surface Roughness Analyses of ED-Machined SUS-316L with Tungsten Tool
|
|
2020 |
|
|
|
|
[28]
|
Investigation of MRR, TWR and Radial Overcut at Varying Depth of Machining during Die Sinking EDM
|
|
2020 |
|
|
|
|
[29]
|
A Critical Review on the Machining of Engineering Materials by Die-Sinking EDM
|
|
2020 |
|
|
|
|
[30]
|
Prédiction des Paramètres du Processus d'Usinage par Electroérosion
|
|
2020 |
|
|
|
|
[31]
|
Review of Research Work on Performance Measures in Die Sinking EDM
|
|
2019 |
|
|
|
|
[32]
|
Optimization of machining process of EN-36C using electric discharge machining process
|
|
2019 |
|
|
|
|
[33]
|
Reviewing Sustainability Interpretation of Electrical Discharge Machining Process using Triple Bottom Line Approach
|
|
2019 |
|
|
|
|
[34]
|
A review on optimization of machining performances and recent developments in electro discharge machining
|
|
2019 |
|
|
|
|
[35]
|
Surface evaluation of ED machined 316L stainless steel in TiO2 nano-powder mixed dielectric medium
|
|
2019 |
|
|
|
|
[36]
|
A Review on Process Parameter Optimization in EDM
|
|
2019 |
|
|
|
|
[37]
|
Machining performance and influence of process parameters on stainless steel 316L using die-sinker EDM with Cu tool
|
|
2019 |
|
|
|
|
[38]
|
OPTIMIZATION OF CUTTING SPEED PARAMETER FOR ROUNDNESS STUDY IN WIRE EDM FOR DIFFERENT MATERIALS BY TAGUCHI METHOD
|
|
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)),
2018 |
|
|
|
|
[39]
|
A Review on Copper and its alloys used as electrode in EDM
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
|
|
[40]
|
Mould Insert Surface Roughness Optimization by Orthogonal Array Methodology in Electrical Discharge Machining
|
|
SAST JOURNAL OF SCIENCE AND TECHNOLOGY,
2018 |
|
|
|
|
[41]
|
Effects of Process Parameters on Material Removal Rate and Surface Roughness in Wedm of H-13 Die Tool Steel
|
|
Advanced Engineering Forum,
2018 |
|
|
|
|
[42]
|
A COMPARATIVE STUDY IN FINDING THE MRR OF H30 AND SS304 MATERIAL IN EDM PROCESS
|
|
ANVESHANA’S INTERNATIONAL JOURNAL OF RESEARCH IN ENGINEERING AND APPLIED SCIENCES,
2018 |
|
|
|
|
[43]
|
Comparison of electrode wear rate and surface morphology in electrical discharge machining when using palm oil and kerosene
|
|
2018 |
|
|
|
|
[44]
|
EFFECT OF CURRENT AND ELECTRODE MATERIAL ON MATERIAL REMOVAL RATE (MRR) AND SURFACE ROUGHNESS (RA) IN EDM PROCESS
|
|
AL-TAQANI,
2017 |
|
|
|
|
[45]
|
The Effect of Process Parameters on the Performance Characteristics of Wire Electrical Discharge Machining of AISI D3 Tool Steel
|
|
IUP Journal of Mechanical Engineering,
2017 |
|
|
|
|
[46]
|
Effects of EDM Process parameters on Material Removal Rate, Electrode Wear Rate and Surface Roughness in Incoloy-800
|
|
2017 |
|
|
|
|
[47]
|
A Review on Influence of Process Parameters and Electrodes Materials in EDM Process
|
|
IJIRST–International Journal for Innovative Research in Science & Technology,
2017 |
|
|
|
|
[48]
|
Surface characteristics of Ti-5Al-2.5 Sn in electrical discharge machining using negative polarity of electrode
|
|
The International Journal of Advanced Manufacturing Technology,
2017 |
|
|
|
|
[49]
|
ELID grinding and EDM for finish machining
|
|
2017 |
|
|
|
|
[50]
|
Experimental Study of MRR, TWR, SR on SS 316 and AISI D2 steel using Aluminium Electrode on EDM
|
|
2016 |
|
|
|
|
[51]
|
Effect of Pulse on Time and Pulse off Time on Material Removal Rate and Electrode Wear Ratio of Stainless Steel AISI 316L in EDM
|
|
2016 |
|
|
|
|
[52]
|
Investigating Feasibility of Waste Vegetable Oil for Sustainable EDM
|
|
2016 |
|
|
|
|
[53]
|
Analysis the Effect of Process Parameter on EDM of η-WC-10% Co by Taguchi Method
|
|
International Journal of Engineering Technology, Management and Applied Sciences,
2016 |
|
|
|
|
[54]
|
Employing severe plastic deformation to the processing of electrical discharge machining electrodes
|
|
Precision Engineering,
2016 |
|
|
|
|
[55]
|
Experimental Analysis of Machining Parameters for EDM of AISI 4340 Steel using Copper-Tungsten Electrode
|
|
Journal of Thermal Energy Systems,
2016 |
|
|
|
|
[56]
|
A Review–Comparative Study & Optimization of Different Tool Material on AISI 2136 (Plastic Mould Steel) in EDM
|
|
2016 |
|
|
|
|
[57]
|
Optimization of tool wear rate during electrical discharge machining of advanced materials using Taguchi analysis
|
|
2016 |
|
|
|
|
[58]
|
1.13 ELID Grinding and EDM for Finish Machining
|
|
2016 |
|
|
|
|
[59]
|
Experimental Investigation and Optimization of RaValue, EWR, and MRRinElectric DischargeMachining
|
|
IOSR Journal of Mechanical and Civil Engineering,
2016 |
|
|
|
|
[60]
|
Experimental Investigation and Modelling of EWR, Ra and MRR in Electric Discharge Machining of AISI 316 Steel
|
|
2016 |
|
|
|
|
[61]
|
EXPERIMENTAL INVESTIGATION OF MACHINING PARAMETERS FOR EDM OF “ZA-27” ALLOY USING TAGUCHI ANALYSIS
|
|
2016 |
|
|
|
|
[62]
|
Enhancing Electrical Discharge Machining Performance Through Employment of Titanium Nanopowder Mixed Dielectric and Severe Plastic Deformation of Electrode
|
|
2016 |
|
|
|
|
[63]
|
I NFLUENCE OF ELECTRODE MATERI AL ON QUALITY OF BLIND HOLES MACHINED VIA ELECTRI C DI SCHARGE MACHI NE (DI E SI NKER)
|
|
2015 |
|
|
|
|
[64]
|
Experimental investigation of electrode wear in die-sinking EDM on different pulse-on & off time (µs) in cylindrical copper electrode
|
|
2015 |
|
|
|
|
[65]
|
Research Article An Experimental Investigation on AISI 316 Stainless Steel for Tool Profile Change in Die Sinking EDM Using DOE
|
|
Scholars Journal of Engineering and Technology,
2015 |
|
|
|
|
[66]
|
A Review–An Experimental Effect of Electrode Material on Overcut, MRR, TWR and Surface Roughness of AISI 304 Stainless Steel in EDM
|
|
International Journal for Scientific Research & Development,
2015 |
|
|
|
|
[67]
|
Parametric Study For Overcut Using EDM With Tool of Graphite, Copper & Silver
|
|
2015 |
|
|
|
|
[68]
|
INFLUENCE OF ELECTRODE MATERIAL ON QUALITY OF BLIND HOLES MACHINED VIA ELECTRIC DISCHARGE MACHINE (DIE SINKER)
|
|
2015 |
|
|
|
|
[69]
|
Assessment of operational feasibility of waste vegetable oil based bio-dielectric fluid for sustainable electric discharge machining (EDM)
|
|
The International Journal of Advanced Manufacturing Technology,
2015 |
|
|
|
|
[70]
|
EXPERIMENTAL STUDY OF ELECTRICAL DISCHARGE MACHINING ON STAINLESS STEEL WORKPIECE USING ONE PARAMETER AT A TIME APPROACH
|
|
ELK Asia Pacific Journals – Special Issue,
2015 |
|
|
|
|
[71]
|
An Experimental Investigation of Electrode Wear Rate (EWR) on EDM of SS-202 using Different Electrodes
|
|
International Journal of Engineering Research and Technology,
2015 |
|
|
|
|
[72]
|
Experimental Study of Electrical Discharge Machine (die sinking) on Stainless Steel 316L Using Design of Experiment
|
|
Procedia Manufacturing,
2015 |
|
|
|
|
[73]
|
Experimental Investigation of Electrode Wear in Die-Sinking EDM on Different Pulse-on &off Time (µs) in Cylindrical Copper Electrode
|
|
International Journal of Modern Engineering Research (IJMER),
2015 |
|
|
|
|
[74]
|
Experimental Investigation of Electrode Wear in Die-Sinking EDM on Different Pulse-on &off Time (μs) in Cylindrical Copper Electrode
|
|
International Journal of Modern Engineering Research,
2015 |
|
|
|
|
[75]
|
Effect of current and deep cryogenic treated EDM electrodes on surface roughness of AISI D3 steel
|
|
Applied Mechanics and Materials,
2015 |
|
|
|
|
[76]
|
Investigations on the electric discharge machining of aluminium metal matrix composites MMCS and Aluminium Metal Matrix Nano Composites Mmncs
|
|
2014 |
|
|
|
|
[77]
|
Performance Evaluation of Electrical Discharge Machining Die Sinking on Stainless Steel 316L Using Copper Impregnated Graphite
|
|
Applied Mechanics and Materials,
2014 |
|
|
|
|
[78]
|
Comparative Studies On Electrical Discharge Machining Parameterspowder Metallurgical Electrode With Conventional Electrode
|
|
2014 |
|
|
|
|
[79]
|
Comparative studies on electrical discharge machining parameters powder metallurgical electrode with conventional electrode
|
|
2014 |
|
|
|
|
[80]
|
Experimental Study of Electrode Wear in Die-Sinking EDM using Cylindrical Copper Electrode
|
|
International Journal of Engineering Research & …,
2014 |
|
|
|
|
[81]
|
Experimental Investigation for Optimizing EDM Parameters for Die Steel D3 to analyze MRR, TWR and Radial Overcut
|
|
|
|
|
|
|
[82]
|
Paslanmaz çeliğinin elektro erozyon ile işlenmesinde işlem parametrelerinin optimizasyonu
|
|
|
|
|
|
|
[83]
|
Effects of EDM Process parameters on Material Removal Rate, Electrode Wear Rate and Surface Roughness in Incoloy-800 M. JagadeeswaraRao, b K …
|
|
|
|
|
|
|
[84]
|
EXPERIMENTAL STUDY OF ELECTRICAL DISCHARGE MACHINING ON STAINLESS STEEL WORKPIECE USING ONE PARAMETER AT A TIME …
|
|
P Singh, V Yadava
|
|
|
|