S. Salvatore, C. Carmelo, P. M. Riccobenea, P. Giacomo and P. Alessandro, “Selective Oxidation of CO in H₂-rich Stream over Au/CeO₂ and Cu/CeO₂ Catalysts: An Insight on the Effect of Preparationmethod and Catalyst Pretreatment,” Applied Catalysis A: General, Vol. 417- 418, 2012, pp. 66-75.

has been cited by the following article:

• TITLE: Effect of Cu Loading to Catalytic Selective CO Oxidation of CuO/CeO2 –Co3O4

  AUTHORS: P. Aunbamrung, A. Wongkaew

  KEYWORDS: Selective CO Oxidation; CuO/CeO2 –Co3O4; Cu Loading; Ce:Co Ratio; Co-precipitation

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.3 No.4B, October 25, 2013

  ABSTRACT: This work studied CuO/CeO2-Co3O4 with wt% Ce:Co ratio 95:5 for selective CO oxidation with effect of wt% Cu loading. The catalysts were prepared by co-precipitation. Characterizations of catalysts were carried out by XRD and BET techniques. The results showed a good dispersion of CuO for 5 wt% Cu loading catalysts and showed high specific surface area of catalyst. For selective CO oxidation, both 5CuO and 30CuO catalysts could remove completely CO in the presence of excess hydrogen at 423 K and 20CuO could eliminate CO completely at 443 K. Moreover, considering the selectivity to CO oxidation, the 5CuO catalyst has shown the highest selectivity of 85% while the 30CuO catalyst obtains the selectivity of 65% at the reaction temperature of 423 K.