W. H. Harkins and G. Jura, “Surfaces of Solids. XIII. A Vapor Adsorption Method for the Determination of the Area of a Solid without the Assumption of a Molecular Area, and the Areas Occupied by Nitrogen and Other Molecules on the Surface of a Solid,” Journal of the American Chemical Society, Vol. 66, No. 8, 1944, pp. 1366-1373.

has been cited by the following article:

• TITLE: Synthesis of a Green Nano-Silica Material Using Beneficiated Waste Dunites and Its Application in Concrete

  AUTHORS: A. Lazaro, G. Quercia, H. J. H. Brouwers, J. W. Geus

  KEYWORDS: Olivine; Nano-Silica; CO2 Reduction; Environmentally Friendly; Concrete

  JOURNAL NAME: World Journal of Nano Science and Engineering, Vol.3 No.3, September 5, 2013

  ABSTRACT: Nano-silica, one of the substances boosting the field of nanomaterials, can be produced by dissolving olivine in acid. The dissolution of olivine is a convenient alternative route to the existing methods of nano-silica production (neutralization of sodium silicate and flame hydrolysis) because the olivine dissolution is a low temperature process making this method cheaper and greener. Furthermore, this process can use waste olivine materials for the production of nano-silica. The produced nano-silica has a specific surface area between 100 and 400 m2/g; a primary particle size between 10 and 25 nm, which is agglomerated in clusters; and an impurity content below 5 wt.%. In addition, olivine nano-silica can be classified as a pozzolanic material with an activity index of 101%. The optimum replacement level of olivine nano-silica in conventional vibrated concrete is around 5% by volume resulting in: 1) a compressive strength increase of 20%; 2) a CO2 emission reduction of 3%. Therefore, the use of the olivine nano-silica in CVC does not only improve the compressive strength but also reduce the CO2 emissions.