J. Krupka, R. G. Geyer, J. Baker-Jarvis and J. Ceremuga, “Measurements of the Complex Permittivity of Microwave Circuit Board Substrates Using Split Dielectric Resonator and Resonant Cavity Techniques,” 7th International Conference on Dielectric Materials, Measurements and Applications, Bath, 23-26 September 1996, pp. 21-24. doi:10.1049/cp:19960982

has been cited by the following article:

• TITLE: Effect of Cavity Dimensions on TE01δ Mode Resonance in Split-Post Dielectric Resonator Techniques

  AUTHORS: Fang Chen, Sheng Mao, Xiaohui Wang, Elena Semouchkina, Michael Lanagan

  KEYWORDS: Split Post-Dielectric Resonator; TE01δ Mode; Cavity Dimensions

  JOURNAL NAME: Journal of Electromagnetic Analysis and Applications, Vol.4 No.9, September 20, 2012

  ABSTRACT: The effects of cavity dimensions on the resonance frequency and resonance strength of the TE01δmode in split postdielectric resonator (SPDR) technique are investigated by using full-wave simulations. The results of simulations provide guidance for adjusting the dimensional parameters of the set-up to ensure that a strong TE01δ resonance mode is excited. The scaled designs of SPDR fixtures for operation at frequencies that are most important for applications are presented. These designs employ two sets of dielectric resonators (DRs) that can be fabricated from the standard ceramic materials. In addition, it is demonstrated that the resonance frequency of the TE01δ mode in the fixture can be tuned by adjusting the gap of the split DR.