Naffakh, H., Shamanian, M. and Ashrafizadeha, F. (2009) Investigation on AISI 304 Austenitic Stainless Steel to AISI 4140 Low Alloy Steel Dissimilar Joints by Gas Tungsten Arc, Electron Beam and Friction Welding. Journal of Materials Processing Technology, 209, 3628-3639.
https://doi.org/10.1016/j.jmatprotec.2008.08.019

has been cited by the following article:

• TITLE: Characterization of Dissimilar Welding between 304 Stainless Steel and Gray Iron Using Nickel Coated Electrode

  AUTHORS: Jesús García-Lira, Enrique Curiel-Reyna, Yajaira Curiel-Razo, Alberto Lara-Guevara, Ignacio Rojas-Rodríguez

  KEYWORDS: Dissimilar Metal Welding, Gray Cast Iron, Heat Affected Zone, Preheat and Post Heat Conditions, Stainless Steel AISI 304

  JOURNAL NAME: Materials Sciences and Applications, Vol.12 No.12, December 31, 2021

  ABSTRACT: This paper presents the study carried out to study the microstructure and mechanical properties of AISI 304 stainless steel and gray iron, in order to recognize the effect of welding parameters on the joint. The shielded metal arc welding technique was applied with a 3.2 mm diameter nickel coated electrode under preheating and post heat conditions at 350°C. Vickers hardness test and metallographic analysis were carried out at the heat affected zone and at the interface to determine the effect on mechanical and metallurgical characteristics. Vickers hardness differences among joint areas were directly related to microstructural changes. There are no significant differences in AISI 304 hardness, but the hardness increased at the heat affected zone and decreased at the filler metal. Grey iron hardness at the heat affected zone was even lower and more slightly superior than grey iron hardness.