Mirzaee, M., Keshmiri, H., Ebrahimi, G.R. and Momeni, A. (2012) Dynamic Recrystallization and Precipitation in Low Carbon Low Alloy Steel 26NiCrMoV 14-5. Materials Science and Engineering: A, 551, 25-31.
https://doi.org/10.1016/j.msea.2012.04.063

has been cited by the following article:

• TITLE: Investigation of Hot Deformation Behavior of SNCM8 Alloy Steel

  AUTHORS: Naiyanut Jantepa, Surasak Suranuntchai

  KEYWORDS: SNCM8 Alloy Steel, Hot Deformation, Dynamic Recrystallization, Cingara Equation, Avrami Equation

  JOURNAL NAME: World Journal of Mechanics, Vol.11 No.3, March 26, 2021

  ABSTRACT: Plastic flow behavior of the SNCM8 steel was investigated by performing hot compression tests within the temperature range of 850˚C to 1200˚C and strain rates of 0.01 s−1 to 10 s−1. Constitutive modeling based on dynamic recrystallization was established, in which Cingara equation was applied to represent work hardening up to peak stress and Avrami equation to describe dynamic softening beyond peak stress up to steady state. It was found that stress-strain responses predicted by the combined model fairly agreed with experimentally resulted curves for the particular conditions. The correlation coefficient (R) of 0.9485 and average absolute relative error (AARE) of 2.3614% was calculated for the modeled flow curves.