dos Santos de Almeida, E.A., Giubilei Milan, J.C. and Edil da Costa, C. (2015) Acquired Properties Comparison of Solid Nitriding, Gas Nitriding and Plasma Nitriding in Tool Steels. Materials Research, 18-1, 27-35.

has been cited by the following article:

• TITLE: Appraisal of Surface Modified AISI 316 L Stainless Steels by Plasma and Solid Nitriding Techniques

  AUTHORS: R. Guardian, I. Rosales-Cadena, J. L. Valle-Mata, J. Pereyra-Hernández, O. Ocampo

  KEYWORDS: Surface Modification, Hardness, Mechanical Properties, Wear

  JOURNAL NAME: Materials Sciences and Applications, Vol.11 No.7, July 17, 2020

  ABSTRACT: AISI 316 L stainless steels type was surface modified by ion and solid nitriding treatment. It was demonstrated that a surface activation pretreatment in samples based in acid mixture accompanied with NH4NO3 solution inside the container, can produce an efficient nitrogen diffusion process. As compared with ion nitriding treatment (20%N2-80%H2), the samples were treated with solid nitriding technique, using Fe4KCN based compound at the same time and temperature (6 h and 500°C respectively). Superficial layers with a depth of 45 μm average were obtained with six hours treatment. Hardness surface values of two surface treatments present an increased value of approximately three times with respect to the matrix sample. Wear evaluation indicated low regimes of weight losses for both treatments. Oxidative-adhesive result is to be the predominant operating wear mechanism. Positive results were obtained in solid nitriding technique as compared with the expensive ion nitriding technique.