Bakkali, S., & Amrani, M. (2006). Un modèle 3D des “perturbations” des séries phosphatées basé sur l’optimisation des réponses du signal analytique des données de résistivité électrique. African Journal of Science and Technology, 7, 121-131.
https://doi.org/10.4314/ajst.v7i1.55208

has been cited by the following article:

• TITLE: Use of the Inverse Slope Method for the Characterization of Geometry of Basement Aquifers: Case of the Department of Bouna (Ivory Coast)

  AUTHORS: Rock Armand Michel Bouadou, Kouamé Auguste Kouassi, Francis Williams Kouassi, Adama Coulibaly, Théophile Gnagne

  KEYWORDS: Inverse Slope, Electric Sounding, Geometry of Aquifers, Bouna, Ivory Coast

  JOURNAL NAME: Journal of Geoscience and Environment Protection, Vol.7 No.6, June 30, 2019

  ABSTRACT: The inverse slope method (ISM) was used to interpret electric sounding data to determine the geoelectric parameters of the alteration zones (continuous media) and rocky environments (discontinuous environments) of the Bouna Department. Having both qualitative and quantitative interpretation, the inverse slope method (ISM) has the ability to determine the different geoelectric layers while characterizing their resistivities and true thicknesses. In the Bouna department, this method allowed us to count a maximum of four (4) geoelectric layers with a total thickness ranging from 12.99 m to 24.66 m. The alteration thicknesses calculated by the ISM in comparison with those measured in the boreholes showed a linear agreement of the coefficient of determination R2 = 0.8269 with the support of the Nash criterion which showed that this method gave thicknesses of alteration close to 76.76% of that obtained during the drillings.