M. Simeone, L. Salemme, D. Scognamiglio, C. Allouis and G. Volpicelli, “Effect of Water Addition and Stoichiometry Variations on Temperature Profiles in an Autothermal Methane Reforming Reactor with Ni Catalyst,” International Journal of Hydrogen Energy, Vol. 33, No. 4, 2008, pp. 1252-1261. doi:10.1016/j.ijhydene.2007.12.034

has been cited by the following article:

• TITLE: Structured Perovskite-Based Oxides: Use in the Combined Methane Reforming

  AUTHORS: Adriana García, Norymar Becerra, Luis García, Ini Ojeda, Estefanía López, Carmen M. López, Mireya R. Goldwasser

  KEYWORDS: Methane Reforming, Perovskites, Syngas Production, Structured Catalysts

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.1 No.4, October 26, 2011

  ABSTRACT: The behavior of metallic structured perovskite-based catalysts was evaluated in the combined methane reforming reaction with CO2-O2. The reaction conditions were established by varying the reaction temperature and reactor input composition in the range of 650 to 850℃ and CH4/CO2 ratio 1 to 5, respectively. The results of the catalytic tests at 750℃ showed a positive effect of the metallic structure, producing higher conversions and H2/CO ratios in the products compare to that obtained with the powder catalyst.