Palos, R., Gutiérrez, A., Arandes, J.M. and Bilbao, J. (2018) Catalyst Used in Fluid Catalytic Cracking (FCC) Unit as a Support of NiMoP Catalyst for Light Cycle Oil Hydroprocessing. Fuel, 216, 142-152.
https://doi.org/10.1016/j.fuel.2017.11.148

has been cited by the following article:

• TITLE: Development of Dispersion Models for the Simulation of Fluid Catalytic Cracking of Vacuum Gas Oil in Riser Reactor

  AUTHORS: Kenneth Kekpugile Dagde

  KEYWORDS: Modelling and Simulation, Axial Dispersion, Vacuum Gas Oil, Riser Reactor, Visual Basic 6.0

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.8 No.4, October 26, 2018

  ABSTRACT: Dispersion models for the simulation of an industrial Fluid Catalytic Cracking Riser Reactor have been developed. The models were developed based on the principle of conservation of mass and energy on the reacting species due to bulk flow and axial dispersion. The four-lump kinetic scheme was used to describe the cracking reactions occurring in the reactor. The model equations were a set of parabolic Ordinary Differential Equations which were reduced to first order differential equations by appropriate substitutions and integrated numerically using 4th order Runge Kutta algorithm using Visual Basic 6.0. Results obtained showed a maximum percentage deviation ranging from 0.31% to 5.7% between model predictions and industrial plant data indicating reasonable agreement. Simulation of model at various operating parameters gave optimum gasoline yield of 45.6% of the most significant variable of temperature (658 K), superficial velocity (0.1 m/s), catalyst to gas oil ratio (7.0) and diffusion coefficient of 0.23 m2/s.