Al-Maamori, M.H., Al-Mosawi, A.I. and Abed, M.A. (2015) Design and Manufacture of Road Bumps Using Waste of Polyethylene Terephthalate Bottles (PET). Central Organization for Standardization and Quality Control (COSQC), No.4244, International Classification (C01B31/08), Iraqi Classification 34.

has been cited by the following article:

• TITLE: Technological Procedure for Recycling of PET Waste for Sustainable Environment Concept Achievement

  AUTHORS: Ali I. Al-Mosawi, Shaymaa Abbas Abdulsada

  KEYWORDS: PET Waste, Road Bumps, SBR, Sustainable Environment

  JOURNAL NAME: Open Access Library Journal, Vol.5 No.1, January 31, 2018

  ABSTRACT: In this research, polyethylene terephthalate bottles (PET) waste was added to styrene-butadiene rubber (SBR) to manufacture road bumps, as a technological procedure for recycling this PET waste, in order to maintain a clean and sustainable environment. Polyethylene terephthalate bottles were cut as grooved strips and added to bump SBR batch with various percentages (0 - 100 pphr). Mechanical tests were performed before and after the addition of PET waste including tensile strength, hardness, and resilience. Nanoparticles of carbon black, zinc oxide and sulfur were used, and compare the results with samples with micro particles additions. The result shows that the developed and manufactured bump SBR in this research conforms to the mechanical characteristics of the original bump model especially with nanoparticles additives, and the best results obtained with the nanoparticles additions.