Quiñones-N, F.J., De la Hidalga-W, F.J., Moreno, M., Molina, J., Zúñiga, C. and Calleja, W. (2014) Mechanical Characterization of Polysilicon Cantilevers Using a Thermo-Mechanical Test Chip Fabricated with a Combined Bulk/Sur-face Micromachining Technique. Results in Physics, 4, 119-120.
http://dx.doi.org/10.1016/j.rinp.2014.07.007

has been cited by the following article:

• TITLE: A Generic MEMS Fabrication Process Based on a Thermal Budget Approach

  AUTHORS: Carlos Ramón Báez Álvarez, Álvarez, Mónico Linares Aranda, Alfonso Torres Jácome, Mario Moreno Moreno, Joel Molina Reyes, Carlos Zúñiga Islas, Wilfrido Calleja Arriaga

  KEYWORDS: Thermal Annealing, CMOS, MEMS, Process Simulation, Surface Micromachining

  JOURNAL NAME: Journal of Electronics Cooling and Thermal Control, Vol.6 No.2, June 29, 2016

  ABSTRACT: A modular and generic monolithic integrated MEMS process for integrating CMOS technology with polysilicon microstructures is presented. The proposed process flow is designed with an intra CMOS approach to fabricate the microstructures into trenches without the need of planarization techniques. After annealing at 1000°C at significant period of time, it is shown that Id-Vg characteristics of the CMOS transistors remain almost unchanged, indicating their robustness to the intra process fabrication for the micromechanical structures. The CMOS module is designed with a 3 μm length as a minimum feature and this process results with a minimum of residual strain and stress on the micromechanical devices (ε = 1.28 × 10-4 and σ = -21 MPa).