R. Sowerby, N. Chandrasekaran, X. Chen, M. Rooks and P. Correa, “The Development of Computer Aids for Sheet Metal Stampings in CAD/CAM and FEM in Metal Working,” In: S.K. Ghosh, A.Niku-Lair, Eds., The Development of Computer Aids for Sheet Metal Stampings in CAD/CAM and FEM in Metal Working, Pergamon Press, Oxford, 1988, pp. 187-203.

has been cited by the following article:

• TITLE: Experimental and Numerical Analysis of Forming Limit Diagram (FLD) and Forming Limit Stress Diagram (FLSD)

  AUTHORS: Mehdi Safari, Seyed Jamal Hosseinipour, Hamed Deilami Azodi

  KEYWORDS: Forming Limit Diagram, Forming Limit Stress Diagram, Aluminum Alloy 3105, Ductile Fracture Criteria

  JOURNAL NAME: Materials Sciences and Applications, Vol.2 No.5, May 23, 2011

  ABSTRACT: In this work, forming limit diagram for aluminum alloy 3105 is performed experimentally and forming limit based on stress (FLSD) calculated from strains that resulted from experimental procedure. In addition, numerical prediction by ductile fracture criteria using simulation is considered and it is shown that they are well suited with the experimental results. The strain paths from finite element simulations are found fairly acceptable to represent both sides of the FLD.