S. H. Bhavnani and A. E. Bergles, “Effect of Surface Geometry and Orientation on Laminar Natural Convection from a Vertical Flat Plate with Transverse Roughness Elements,” International Journal of Heat Mass Transfer, Vol. 33, No. 5, 1990, pp. 965-981. doi:10.1016/0017-9310(90)90078-9

has been cited by the following article:

• TITLE: Investigation of Natural Convection Heat Transfer Coefficient on Extended Vertical Base Plates

  AUTHORS: M. Fahiminia, M. M. Naserian, H. R. Goshayeshi, D. Majidian

  KEYWORDS: Natural Convection, Vertical Surfaces, Simple Algorithm, Rectangular Fins

  JOURNAL NAME: Energy and Power Engineering, Vol.3 No.2, May 18, 2011

  ABSTRACT: In this research, Computational analysis of the laminar natural convection on vertical surfaces has been in-vestigated. Natural convection is observed when density gradients are present in a fluid acted upon by a gravitational field. Our example of this phenomenon is the heated vertical plate exposed to air, which, far from the plate, is motionless. The CFD simulations are carried out using fluent software. Governing equa-tions are solved using a finite volume approach. Coupling between the velocity and pressure is made with SIMPLE algorithm. The resultant system of discretized linear algebraic equations is solved with an alternat-ing direction implicit scheme. Then a configuration of rectangular fins is put in different ways on the surface and natural convection heat transfer coefficient on these no slope surfaces is studied and finally optimization is done.