P. M. Bersier, J. Howell and C. Bruntlett, “Advanced Electroanalytical Techniques versus Atomic Absorption Spectrometry, Inductively Coupled Plasma Atomic Emission Spectrometry and Inductively Coupled Plasma Mass Spectrometry in Environmental Analysis,” Analyst, Vol. 119, No. 2, 1994, pp. 219-232.
http://dx.doi.org/10.2116/analsci.18.1059

has been cited by the following article:

• TITLE: Preparation and Properties of a New Carbon Paste Iron Selective Electrodes and Their Applications

  AUTHORS: Refat F. Aglan, Mahmoud S. Rizk, Gehad G. Mohamed, Ahmed H. El-Wahy, Hala A. Mohamed

  KEYWORDS: Triazol Ionophores; Ferrous Ion Determination; Modified Carbon Paste Electrodes

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.5 No.2, January 27, 2014

  ABSTRACT: The new ferrous-selective modified carbon paste electrodes (I and II) based on 5,5’-(propane-1,3-diylbis(sulfanediyl))bis(3-benzyl-4H-1,2,4-triazol-4-amine) (electrode I, A-ionophore) and 5,5’-(butane-1,4-diyl-bis(sulfane- diyl))bis(3-benzyl-4H-1,2,4-triazol-4-amine) (electrode II, B-ionophore) as ionophores are described. These electrodes exhibit Nernstian slopes of 30.2 ± 0.5 and 29.1 ± 0.5 mV·decade-1, linear range of 1.0 × 10-7 - 1.0 × 10-2 mol·L-1 Fe(II) ion and detection limit of 1.0 × 10-7 mol·L-1 Fe(II) ion for electrode (I) and electrode (II), respectively. Both electrodes (I and II) have a fast response time of about 15 sand can be used for at least 3 months. The two electrodes revealed a good selectivity for Fe(II) over a wide variety of other metal ions and could be used in the pH range of 1.8 - 3.0 without any divergence in potential. The proposed sensors were successfully applied for the determination of Fe(II) ion in different real samples.