R. W. Birkmire, B. E. McCandless and S. S. Hegedus, “Opti-mization of Vapor Post-Deposition Processing for Evaporated CdS/CdTe Solar Cells,” Solar Energy, Vol. 12, 1992, pp. 37-45.

has been cited by the following article:

• TITLE: Influence of Bath Temperature, Deposition Time and S/Cd Ratio on the Structure, Surface Morphology, Chemical Composition and Optical Properties of CdS Thin Films Elaborated by Chemical Bath Deposition

  AUTHORS: F. Ouachtari, A. Rmili, B. Elidrissi, A. Bouaoud, H. Erguig, P. Elies

  KEYWORDS: Cadmium Sulphide, Chemical Bath Deposition, Thin Film, Structure, Morphology, Optical Properties

  JOURNAL NAME: Journal of Modern Physics, Vol.2 No.9, September 19, 2011

  ABSTRACT: Cadmium sulphide (CdS) thin films were deposited on glass substrates by the chemical bath deposition (CBD) method, using anhydrous cadmium chloride (CdCl2) and thiourea (CS(NH2)2) as sources of cadmium and sulphur ions respectively. The influence of bath temperature (Tb), deposition time (td) aSnd [S]/[Cd] ratio in the solution on the structural, morphological, chemical composition and optical properties of these films were investigated. XRD studies revealed that all the deposited films were polycrystalline with hexagonal structure and exhibited (002) preferential orientation. The films deposited under optimum conditions (Tb = 75?C, td = 60 min and [S]/[Cd] ratio = 2.5) were relatively well crystallized. These films showed large final thickness and their surface morphologies were composed of small grains with an approximate size of 20 to 30 nm and grains grouped together to form large clusters. EDAX analysis revealed that these films were nonstoichiometric with a slight sulphur deficiency. These films exhibited also a transmittance value about 80% in the visible and infra red range.