Fruehan, R.J. and Martonik, I.J. (1973) The Rate of Chlorination of Metals and Oxides: Part III. The Rate of Chlorination of Fe2O3 and NiO in Cl2 and HCL. Metallurgical Transactions, 4, 2793-2797.
http://dx.doi.org/10.1007/BF02644579

has been cited by the following article:

• TITLE: Tin Recovery as Stannous Chloride by Chlorination of Tin-Plated Scrap at 298 K

  AUTHORS: Raul Coltters, Adalberto Rosales, Aurora Molina

  KEYWORDS: Chlorination, Scraps, Tinplated, Chlorine

  JOURNAL NAME: Open Access Library Journal, Vol.2 No.9, September 15, 2015

  ABSTRACT: The chlorination of domestic tin-plated scrap was studied to determine the potential of this material as a source of tin for the manufacture of stannous chloride. It is found that tin-plated crap chlorinated in a preferential manner at a temperature of 298 K and iron did not react with chlorine at this temperature. It has been demonstrated on a laboratory scale that it is feasible to separate tin from tin coated scrap as high purity SnCl2 crystals by chlorinating in Cl2/N2 gas mixtures, and as illustrated in Table 3,the SnCl2(s) obtained in this work has the same high purity that of those produced by some commercial laboratories. The results show that tin-plated scrap has good potential as raw material for the manufacture of stannous chloride by selective chlorination.