Liu, G.Q., Li, S.Q., Liu, G.Q., et al. (2011) Characteristics of the Motion of Martian Dust Simulant on the Travelling-Wave Electric Curtain. Journal of Engineering Thermal Physics, 32, 2073-2075.

has been cited by the following article:

• TITLE: Further Study of Electric Dust Removal with Transparent Fork Electrodes

  AUTHORS: Guangming Wu, Dan Li, Jianxiang Yu, Tianlan Yin, Dongdong Feng

  KEYWORDS: Transparent Fork Electrode, Dust Removal Efficiency, ITO

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.6 No.3, January 30, 2015

  ABSTRACT: This study is a continuation of our previous work. In this experiment, transparent tin-doped indium oxide (ITO) fork electrodes with different width and spacing were coated on the glass substrates. The used dust particle size was smaller than 180 mesh. The effects of the electrode width, the electrode spacing, voltage, frequency, waveform, and the duty ratio on the dust removal efficiency were studied. The obtained optimum conditions of dust removal were as follows: voltage was 1500 V, frequency was 15 Hz, square wave, 10% duty ratio, the electrode width was 0.5 mm, electrodes spacing was 1.3 mm. Our previous experimental results show that the dust removal efficiency would be up to 95%. But in this experiment, under the optimum conditions, the dust removal efficiency could be up to 99%.