Share This Article:

Wear Properties of Hot Extruded Aluminum Powder Compacts

Abstract PP. 1-7
DOI: 10.4236/oalib.1100547    1,099 Downloads   1,380 Views   Citations

ABSTRACT

Aluminum powder compacts have low wear resistance due to the reduction in ductility. The ductility enhances using the metalwork technology like the hot extrusion process. The wear test is done using pin on disc machine for all hot extruded aluminum compacted specimen reinforced with 1, 2, 3, and 4 copper wires, and extruded at 450℃. The load is applied by dead weights (1600 gm) at 4 variable linear velocities of 0.628, 0.942, 1.25 and 1.57 m/sec at constant time. The results shown that wear resistance enhances with the hot extrusion process for increasing number of reinforcement copper wires.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Abdellah, M. , Moustafa, M. , Mohamed, A. and Abdel-Jaber, G. (2014) Wear Properties of Hot Extruded Aluminum Powder Compacts. Open Access Library Journal, 1, 1-7. doi: 10.4236/oalib.1100547.

References

[1] Wodarczyk-Fligier, A., Dobrzaski, L.A. and Adamiak, M. (2007) Influence of Heat Treatment on Properties and Corrosion Resistance of Al-Composite. Journal of Achievements in Materials and Manufacturing Engineering, 21, 55-58.
[2] Dobrzaski, L.A., Wodarczyk, A. and Adamiak, M. (2006) Composite Materials Based on EN AW-Al Cu4Mg1(A) Aluminium Alloy Reinforced with the Ti(C,N) Ceramic Particles. Materials Science Forum, 530-531, 243-248.
http://dx.doi.org/10.4028/www.scientific.net/MSF.530-531.243
[3] Torres, B., Lieblich, H., Ibanez, J. and Garcia, A. (2002) Escorial, Mechanical properties of some PM Aluminide and Silicide Reinforced 2124 Aluminium Matrix Composites. Scripta Materialia, 47, 45.
http://dx.doi.org/10.1016/S1359-6462(02)00095-7
[4] Tjong, S.C. and Mal, Z.Y. (2000) Microstructural and Mechanical Characteristics of in Situ Metal Matrix Composites. Materials Science and Engineering, 29, 49-113.
http://dx.doi.org/10.1016/S0927-796X(00)00024-3
[5] Dyzia, M. and leziona, J. (2008) Aluminium Matrix Composites Reinforced with AlN Particles Formed by in Situ Reaction. Archives of Materials Science and Engineering, 31, 17-20.
[6] Yeh, J.W., Yuan, S.-Y. and Peng, Ch.-H. (1998) A Reciprocating Extrusion Process for Producing Hypereutectic Al-20 wt. % Si Wrought Alloys. Materials Science and Engineering, A252, 212-216.
http://dx.doi.org/10.1016/S0921-5093(98)00677-7
[7] Dobrzaski, L.A., Wodarczyk-Fligier, A. and Adamiak, M. (2005) Properties and Corrosion Resistance of PM Composite Materials Based on EN AW-Al Cu4Mg1(A) Aluminum Alloy Reinforced with the Ti(C,N) Particles. Proceedings of 11th International Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S’2005, Gliwice-Zakopane, 289-295.
[8] Dobrzaski, L.A., Wodarczyk-Fligier, A. and Adamiak, M. (2006) Structure and Properties of PM Composite Materials Based on EN AW-2124 Aluminum Alloy Reinforced with the BN or Al2O3 Ceramics Particles. Journal of Materials Processing Technology, 175, 186-191.
http://dx.doi.org/10.1016/j.jmatprotec.2005.04.031
[9] Jain, R.K. (1980) Production Technology. 15th Edition, AC No. 6219 NSME/SMPD, 8-320.
[10] Pearson, C.E. and Parkins, R.N. (1961) The Extrusion of Metals. 2nd Edition, Chapman and Hall Limited, London, Chapters 2 and 5.
[11] Ruoff, A.L. (1982) Composite Materials. Materials Science, 2, 331-339.
[12] McQueen, H.J., et al. (1986) Strength of Metals and Alloys, Vol. 1. Pergamum Press, Oxford, 761-773.
[13] Rao, M.N. (1994) Hot Extrusion of Sintered Preforms of Aluminium and Aluminium-Iron Composites. Ph.D. Dissertation, Bharathi Dasan University, Tamil Nadu.
[14] Shakespeare, C.R. and Oliver, D.A. (1964) The Hot Extrusion of Metal Powders. International Journal of Powder Metallurgy, 7, 202-212.
[15] Chare, P.J.M. and Sheppard, T. (1969) Powder Extrusion as a Primary Fabricating Process for Al-Fe Alloys. Powder Metallurgy, 12, 109-119.
[16] Hansen, N. (1964) A Note on the Density of Sintered Aluminium Products. Powder Metallurgy Journal, 7, 64-68.
[17] Pérez Delgado, Y., Bonny, K., De Baets, P., Staia, M.H., Neis, P.D., Ferreira, N.F., Malek, O., Vleugels, J. and Lauwers, B. (2013) Friction and Wear Response of Tib2-B4c Ceramics. International Journal Sustainable Construction & Design, 4.
[18] Mohammed, Y., Moustafa, M.M., Mohamed, A.T. and Abdel-Jaber, G.T. (2014) Finite Element Analysis of Flow Behaviors of Aluminum Powder Compacts. IJARES International Journal of Applied Research in Engineering and Science, 1, 1-10.
[19] Hassan, M.K., Mohammed, Y. and Abu El-Ainin, H. (2012) Improvement of Al-6061 Alloys Mechanical Properties by Controlling Processing Parameters. International Journal of Mechanical & Mechatronics Engineering, 12, 14.
[20] Constantin, V., Scheed, L. and Masounava, J. (1999) Physics and Chemistry of Tribological Wear. Journal of Tribology, Transactions of the ASME, 121.

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.