[1]
|
M. H. Regina, et al., “Comparison of Aluminum Coatings Deposited by Flame Spray and by Electric Arc Spray,” Surface and Coatings Technology, Vol. 202, No. 1, 2007, pp. 172-179. doi:10.1016/j.surfcoat.2007.05.067
|
[2]
|
A. L. Yerokhin, X. Nie, A. Leyland, A. Matthews, S. J. Dowey, “Plasma electrolysis for surface engineering,” Surface and Coatings Technology, Vol. 122, No. 2-3, 1999, pp. 73-93. doi:10.1016/S0257-8972(99)00441-7
|
[3]
|
V. Pokhmurskii, et al., “Plasma Electrolytic Oxidation of Arc-Sprayed Aluminum Coatings,” Journal of Thermal Spray Technology, Vol, 16, No. 5-6, 2007, pp. 998-1004.
doi:10.1007/s11666-007-9104-x
|
[4]
|
M. D. Klapkiv, “State of Electrolytic Plasma in the Process of Synthesis of Oxides Based on Aluminum,” Materials Science, Vol. 31, No. 4, 1995, pp. 494-499.
doi:10.1007/BF00559144
|
[5]
|
C. Moreau, P. Gougeon and M. Lamontagne, “Influence of Substrate Preparation on the Flattening and Cooling of Plasma-Sprayed Particles,” Journal of Thermal Spray Technology, Vol. 4, No. 1, 1995, pp. 25-33.
doi:10.1007/BF02648525
|
[6]
|
S. Shakeri and S. Chandra, “Splashing of Molten Tin Droplets on a Rough Steel Surface,” International Journal of Heat and Mass Transfer, Vol. 45, No. 23, 2002, 4561-4575. doi:10.1016/S0017-9310(02)00170-9
|
[7]
|
M. Fukumoto, E. Nishioka and T. Matsubara, “Flattening and Solidification Behavior of a Metal Droplet on a Flat Substrate Surface Held at Various Temperatures,” Surface and Coatings Technology, Vol. 120-121, 1999, pp. 131-137. doi:10.1016/S0257-8972(99)00349-7
|
[8]
|
N. Mehdizadeh, S. Chandra and J. Mostaghimi, “Formation of Fingers around the Edges of a Drop Hitting a Metal Plate with High Velocity,” Journal of Fluid Mechanics, Vol. 510, 2004, pp. 353-373.
doi:10.1017/S0022112004009310
|
[9]
|
M. Pasandideh-Fard, V. Pershin, S. Chandra and J. Mostaghimi, “Splat Shapes in a Thermal Spray Coating Process: Simulations and Experiments,” Journal of Thermal Spray Technology, Vol. 11, No. 2, 2002, pp. 206-217. doi:10.1361/105996302770348862
|
[10]
|
A. McDonald, M. Lamontagne, C. Moreau and S. Chandra, “Impact of Plasma-Sprayed Metal Particles on Hot and Cold Glass Surfaces,” Thin Solid Films, Vol. 514, No. 1-2, 2006, pp. 212-222. doi:10.1016/j.tsf.2006.03.010
|
[11]
|
M. Fukumoto, E. Nishioka and T. Matsubara, “Flattening and Solidification Behavior of a Metal Droplet on a Flat Substrate Surface Held at Various Temperatures,” Surface and Coatings Technology, Vol. 120-121, 1999, pp. 131-137. doi:10.1016/S0257-8972(99)00349-7
|
[12]
|
A. Nobuyuki, et al., “Surface Modification of Al Sprayed Coatings by Direct Diode Laser Remelting Process,” Transactions of JWRI, Vol. 35, No. 2, 2006),
|
[13]
|
M. P. Planche, et al., “Relationships between in-Flight Particle Characteristics and Coating Microstructure with a Twin Wire Arc Spray Process and Different Working Conditions,” Surface and Coatings Technology, Vol. 182, No. 2-3, 2004, pp. 215-226.
doi:10.1016/S0257-8972(03)00873-9
|