Mechanical response of uterine tissue under the influence of hemostatic clips: A non-linear finite-element approach

Mark A. Nicosia, Donald A. Wood, Daniel Mazzucco

Department of Mechanical Engineering, Widener University, Chester, USA.
ZSX Medical, LLC., King of Prussia, usa.

DOI: 10.4236/jbise.2013.612A004                

Abstract

A modeling strategy to predict the ability of surgical clips to achieve mechanical hemostasis when applied to the cut edge of a thick and muscular tissue is presented in this work. Although such a model may have broad utility in the design of hemostatic clips and other surgical and wound closure applications, our particular focus was on uterine closure following a Cesarean delivery. Mechanical closure of a blood vessel, which is the first step in the hemostatic process, is established when the compressive forces on the outer surface of a blood vessel are sufficient to overcome the local blood pressure and collapse the vessel. For thick tissue, forces applied to the tissue surface set up a stress distribution within the tissue that, if sufficient to mechanically close all vessels, will lead to cessation of local blood flow. The focus of the current work was on utilization of a planar and nonlinear finite element model to predict the pressure distribution within uterine tissue under the influence of hemostatic clips. After experimental model validation with a polymer tissue phantom, design curves were numerically developed, which consisted of the clip force necessary to achieve hemostasis for a given thickness tissue as well as the resulting deformed tissue thickness. Such curves could form the basis for a preliminary clip design, which would provide initial design guidance before more expensive experimental studies were required.

 

Keywords

Medical Device Design; Hemostasis; Finite Element Modeling; Tissue Modeling; Myometrial Tissue

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Taylor, C.A. and Figueroa, C.A. (2009) Patient-specific modeling of cardiovascular mechanics. Annual Review of Biomedical Engineering, 11, 109-134. http://dx.doi.org/10.1146/annurev.bioeng.10.061807.160521
[2]	Maceri, F., Marino, M. and Vairo, G. (2010) A unified multiscale mechanical model for soft collagenous tissues with regular fiber arrangement. Journal of Biomechanics, 43, 355-363. http://dx.doi.org/10.1016/j.jbiomech.2009.07.040
[3]	VitalStats, 2010. http://www.cdc.gov/nchs/vitalstats.htm
[4]	Alpay, Z., Saed, G. and Diamond, M.P. (2008) Postoperative adhesions: From formation to prevention. Seminars in Reproductive Medicine, 26, 313-321. http://dx.doi.org/10.1055/s-0028-1082389
[5]	Cunningham, F., Leveno, K., Bloom, S., Hauth, J., Gilstrap, L. and Wenstrom, K. (2005) Williams obstetrics. 22nd Edition, McGraw Hill, New York.
[6]	Heil, M. (1996) The stability of cylindrical shells conveying viscous flow. Journal of Fluids and Structures, 10, 173-196. http://dx.doi.org/10.1006/jfls.1996.0012
[7]	Lai, W.M., Rubin, D. and Krempl, E. (1993) An introduction to continuum mechanics. Pergamon Press, Oxford.
[8]	Fung, Y.C. (1993) Biomechanics: Mechanical properties of living tissue. Springer-Verlag, New York.
[9]	Pearsall, G.W. (1978) Passive mechanical properties of uterine muscle (myometrium). Journal of Biomechanics, 11, 1555-1566. http://dx.doi.org/10.1016/0021-9290(78)90009-X
[10]	Humphrey, J.D. (2002) Cardiovascular solid mechanics: Cells, tissues, and organs. Springer-Verlag, New York. http://dx.doi.org/10.1007/978-0-387-21576-1
[11]	“Abaqus 6.11 Theory Manual. Dassault Systemes,” 2011.
[12]	Kraitchman, D.L., Young, A.A., Chang, C.-N. and Axel, L. (1995) Semi-automatic tracking of myocardial motion in MR tagged images. IEEE Transactions on Medical Imaging, 14, 422-433. http://dx.doi.org/10.1109/42.414606