The Implementation of Electronic Intelligent Tag System Based on Wireless Sensor Network

Abstract

Recently, Wireless Sensor Network (WSN) has been widely applied in many fields. In this paper, we design and implement a WSN-based Electronic Intelligent Tag System (EITS) to provide intelligent management of the modern supermarkets. As a main transceiver, nRF24L01+ wireless module is used in this system, which will make it possible to achieve low-power and low-cost for EITS. This system fully embodies the advantages and characteristics of WSN. This paper will introduce the system architecture, hardware structure and software design in details; and put forward a specific solution. Finally, we achieve the intelligent management of the mall based on wireless sensor network technology.

Share and Cite:

Yu, K. , Xie, Z. , Qian, J. and Jin, G. (2013) The Implementation of Electronic Intelligent Tag System Based on Wireless Sensor Network. Communications and Network, 5, 39-43. doi: 10.4236/cn.2013.51B010.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] L. Atzori, A. Iera and G. Morabito, “The Internet of Things: A Survey,” Computer Networks, Vol. 54, No. 15, May 2010, pp. 2787-2805. doi:10.1016/j.comnet.2010.05.010
[2] J. G. Evans, R. A. Shober, S. A. Wilkus and G. A. Wright, “A Low-cost Radio for an Electronic Price Label System,” Bell Labs Technical Journal, Vol. 1, No. 2, 1996, pp. 203-214.
[3] I. F. Akyildiz, W. Su, Y. Ankara Subramanian and E. Cayirci, “Wireless Sensor Networks: A Survey,” Computer Networks, Vol. 38, No. 4, 2002, pp. 393-422. doi:10.1016/S1389-1286(01)00302-4
[4] W. W. Chang, T. J. Sung, H. W. Huang, W. C. Hsu, C. W. Kuo, J. J. Chang, et al., “A Smart Medication System using Wireless Sensor Network Technologies,” Sensors and Actuators A: Physical, Vol. 172, No. 1, December 2011, pp. 315-321,. doi:10.1016/j.sna.2011.03.022
[5] P. De Mil, B. Jooris, L. Tytgat, R. Catteeuw, I. Moerman, P. Demeester and A. Kamerman, “Design and Implementation of a Generic Energy-harvesting Foramework Applied to the Evaluation of a Large-scale Electronic Shelf-labeling Wireless Sensor Network,” Eurasip Journal on Wireless Communications and Networking, No. 343690, 2010. doi:10.1155/2010/343690
[6] L. Bissi, P. Placidi and A. Scorzoni, “A Configurable Mixed-signal Architecture for Label-free Smart Biosensor Applications,” IEEE Transactions on Instrumentation and Measurement, Vol. 58, No. 5, 2009, pp. 1333-1344. doi:10.1109/TIM.2009.2012951
[7] C. Cano, B. Bellalta and M. Oliver, “Wake up after Transmissions and Reduced Channel Contention to Alleviate the Hidden Terminal Problem in Preamble Sampling WSNs,” Computer Networks, Vol. 56, No. 2, 2012, pp. 915-926. doi:10.1016/j.comnet.2011.11.011
[8] Nordic Semiconductor, “NRF24L01+ single chip 2.4GHz transceiver: Product specification v1.0,” September 2008, [Online].Available: http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01P.
[9] W. Chen, X. Zhang and B. Liu, “Design of Wireless Temperature & Humidity Sensor Based on NRF24L01,” Advanced Materials Research, Vol. 403-408, 2012, pp. 1277-1280.
[10] Texas Instruments, “MSP430x41x2 Mixed Singnal Microcontroller,” 2009, [Online]. Available: http://www.ti.com/msp430/datasheet.
[11] N. A. Pantazis, D. J. Vergados, D. D. Vergados and C. Douligeris, “Energy Efficiency in Wireless Sensor Networks using Sleep Mode TDMA Scheduling,” Ad Hoc Networks, Vol. 7, No. 2, March 2009, pp. 322-343. doi:10.1016/j.adhoc.2008.03.006
[12] Y. Jiang, J. Liu and J. Li, “Intellignet Battery Monitor Based on MSP430 Microcontroller Unit,” Chinese Journal of Scientific Instrument, Vol. 29, No. 5, 2008, pp. 1040-1043.
[13] Y. J. Li, Y. J. Fang and L. Chen, “A Kind of Sensor the Wireless Network Nodes Design and Implementation of the ARM,” Procedia Engineering, Vol. 15, December 2011, pp. 3567-3571. doi:10.1016/j.proeng.2011.08.668
[14] ST Microelectronics, “STM32F103xC STM32F103xD STM32F103xE,” September 2009, [Online]. Available: http://www.st.com/stm32.
[15] B. Wang, H. B. Lim and D. Ma, “A Coverage-aware Clustering Protocol for Wireless Sensor Networks,” Computer Networks, in press.
[16] W. Ye, J. Heidemann and D. Estrin, “Medium access Control with Coordinated Adaptive Sleeping for Wireless Sensor Networks,” IEEE/ACM Transactions on Networking, Vol. 12, No. 3, 2004, pp. 493-506. doi:10.1109/TNET.2004.828953
[17] L. D. P. Mendes and J. J. P. C. Rodrigues, “A Survey on Cross-layer Solutions for Wireless Sensor Networks,” Journal of Network and Computer Applications, Vol. 34, No. 2, 2011, pp. 523-534. doi:10.1016/j.jnca.2010.11.009
[18] Y. Yim, H. Park, J. Lee, S. Oh and S. H. Kim, “An Energy-efficient Communication Scheme for Mobile Sink Groups in Wireless Sensor Networks,” IEEE Vehicular Technology Conference, 2011, No. 6093197.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.