[1]
|
Z. H. Wang and H. Zhang, “Effective Activation Energy Ue(T,J,H) in Textured Bi1.84Pb0.4Sr2Ca2Cu3Oy Silver-Clamped Thick Films,” Physica C: Superconductivity, Vol. 320, No. 3-4, 1999, pp. 218-224.
doi:10.1016/S0921-4534(99)00349-4
|
[2]
|
M. Mizuno, H. Kokubo and K. Honda, “Preparation, Structure and Conduction Properties of SeCN-Containing Mixed Anion TTF Conductors,” Journal of Materials Chemistry, Vol. 11, No. 9, 2001, pp. 2192-2198.
doi:10.1039/b101864g
|
[3]
|
J. Hakl, “Over-Adiabatic Calorimetry (OAC),” Thermochimica Acta, Vol. 81, 1984, pp. 319-325.
doi:10.1016/0040-6031(84)85137-0
|
[4]
|
S. Srivastava, N. Metha, P. Agarval, D. Kumar and A. Kumar, “Thermal Characterization of Se100-xSbx Glasses Using Isoconversional Method,” Journal of Ovonic Research, Vol. 4, No. 6, 2008, pp. 147-157.
|
[5]
|
B. Prochowska-Klisch and A. Malecki, Thermochimica Acta, Vol. 335, No. 1-2, 1999, pp. 99-104.
|
[6]
|
P. Kostial, M. Mokrysová, J. Sisáková, Z. Mosková and S. Rusnáková, “A System to Measure both Inner and Outer Car Tire Temperatures ‘in Situ’,” International Journal of Thermophysics, Vol. 30, No. 1, 2009, pp. 334-340.
doi:10.1007/s10765-008-0461-6
|
[7]
|
S. Rusnáková, J. Slabeycius and V. Rusnák, “The Possibilities of Electronic Speckle Pattern Interferometry by Investigation of Composite Materials,” Proceedings of SPIE—The International Society for Optical Engineering, San Diego, 13-17 August 2006, 6p.
|
[8]
|
D. Seidl, P. Kostial, Z. Jancíková, I. Ruziak, J. David, R. Puchky and I. Kopal, “Complex Contactless Flash Thermal Analyser of Low Conductive Materials,” Proceedings of the 13th International Carpathian Control Conference, High Tatras, 28-31 May 2012, pp. 628-630.
|
[9]
|
P. Kostial, Z. Jancíková, I. Ruziak, I. Kopal and P. Jonsta, “The Influence of Rubber Blend Aging and Sample Homogeneity on Heat Transport Phenomena,” Defect and Diffusion Forum, Vol. 312-315, 2011, pp. 183-186.
doi:10.4028/www.scientific.net/DDF.312-315.183
|
[10]
|
J. Durfinová, I. Capek, I. ChodáK, A. Liska, P. Kostial, M. Chromcíková, P. Pocarovský, M. Lacko, et al., “Plasticizers Influence on Physicalmechanical Properties and DMTA of Rubber Mixtures—Part A,” Chemicke Listy, Vol. 105, No. 15, 2011, pp. s325-s327.
|
[11]
|
Z. Jonsta, P. Kostial, I. Ruziak, P. Jonsta, J. Jurciová, Z. Jancíková, J. David and I. Kopal, “Advanced Fillers Enhancing Thermal and Mechanical Properties of Rubber Blends,” Journal of Nano Research, Vol. 13, 2011, pp. 27-32. doi:10.4028/www.scientific.net/JNanoR.13.27
|
[12]
|
O. Bosák, J. Kaluzný, J. Preto, J. Vacval, M. Kubliha and J. Hronkovic, “Electrical Properties of a Rubber Blend Used in the Tyre Industry,” Polymers for Advanced Technologies, Vol. 18, No. 2, 2007, pp. 141-143.
doi:10.1002/pat.808
|
[13]
|
S. Minárik, M. Kubliha, V. Labas and J. Kaluzný, “Computer Simulation of Alternate Conductivity of Polymer System,” Journal of Optoelectronics and Advanced Materials, Vol. 8, No. 4, 2006, pp. 1524-1528.
|
[14]
|
M. Kubliha, “Investigating Structural Changes and Defects of Non-Metallic Materials via Electrical Methods,” For-schungszentrum Dresden-Rossendorf, Dresden, 2009.
|