Laboratory Validation of an Integrated Surface Water— Groundwater Model

Abstract

The hydrodynamic surface water model DIVAST has been extended to include horizontally adjacent groundwater flows. This extended model is known as DIVAST-SG (Depth Integrated Velocities and Solute Transport with Surface Water and Groundwater). After development and analytical verification the model was tested against a novel laboratory set-up using open cell foam (60 pores per inch—ppi) as an idealised porous media representing a riverbank. The Hyder Hydraulics Laboratory at Cardiff University has a large tidal basin that was adapted to simulate a surface water—groundwater scenario using this foam, and used to validate the DIVAST-SG model. The properties of the laboratory set-up were measured and values were determined for hydraulic conductivity (permeability) and porosity, evaluated as 0.002 m/s and 75% respectively. Lessons learnt in this initial experimentation were used to modify the flume construction and improve the experimental procedure, with further experimentation being undertaken of both water level variations and tracer movement. Valuable data have been obtained from the laboratory experiments, allowing the validity of the numerical model to be assessed. Modifications to the input file to include representations of the joints between the foam blocks allowed a good fit between the observed and modelled water levels. Encouraging correlation was observed in tracer experiments using Rhodamine-WT dye between the observed exit points of the tracer from the foam, and the modelled exit points with time.

Share and Cite:

T. Sparks, B. Bockelmann-Evans and R. Falconer, "Laboratory Validation of an Integrated Surface Water— Groundwater Model," Journal of Water Resource and Protection, Vol. 5 No. 4, 2013, pp. 377-394. doi: 10.4236/jwarp.2013.54038.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] H. H. J. Cooper and M. I. Rorabaugh, “Ground-Water Movements and Bank Storage Due to Flood Stages in Surface Streams,” US Geological Survey, 1963.
[2] G. F. Pinder and S. P. Sauer, “Numerical Simulation of Flood Wave Modification Due to Bank Storage Effects,” Water Resources Research, Vol. 7, No. 1, 1971, pp. 63-70. doi:10.1029/WR007i001p00063
[3] R. E. Smith and D. A. Woolhiser, “Overland Flow on an Infiltrating Surface,” Water Resources Research, Vol. 7, No. 4, 1971, pp. 899-913. doi:10.1029/WR007i004p00899
[4] R. Freeze and J. A. Cherry, “Groundwater,” Prentice-Hall, Inc., Upper Saddle River, 1979.
[5] M. G. McDonald and A. W. Harbaugh, “A Modular Three-Dimensional Finite Difference Ground-Water Flow Model,” US Geological Survey, 1988.
[6] H. E. Jobson and A. W. Harbaugh, “Modifications to the Diffusion Analogy Surface-Water Flow Model (DAFLOW) for Coupling to the Modular Finite-Difference Ground-Water Flow Model (MODFLOW),” US Geological Survey, Reston, 1999.
[7] M. L. Merrit and L. F. Konikow, “Documentation of a Computer Program to Simulate Lake-Aquifer Interaction Using the MODFLOW Ground-Water Flow Model and the MOC3D Solute-Transport Model,” US Geological Survey, Tallahassee, 2000.
[8] J. I. Restrepo, A. M. Montoya and J. Obeysekera, “A Wetland Simulation Module for the MODFLOW Ground Water Model,” Ground Water, Vol. 36, No. 5, 1998, pp. 764-770. doi:10.1111/j.1745-6584.1998.tb02193.x
[9] S. Panday and P. S. Huyakorn, “A Fully Coupled Physically-Based Spatially-Distributed Model for Evaluating Surface/Subsurface Flow,” Advances in Water Resources, Vol. 27, 2004, pp. 361-382. doi:10.1016/j.advwatres.2004.02.016
[10] R. A. Falconer, “An Introduction to Nearly Horizontal Flows,” In: M. B. Abbott and W. A. Price, Eds., Coastal, Estuarial and Harbour Engineers’ Reference Book, E. & F. N. Spoon Ltd., London, 1993, pp. 27-36.
[11] R. A. Falconer, B. Lin, Y. Wu and E. Harris, “DIVAST Reference Manual,” Hydro-Environmental Research Centre, Cardiff University, Cardiff, 2001.
[12] R. A. Falconer, B. Lin, Y. Wu and E. Harris, “DIVAST User Manual,” Hydro-Environmental Research Centre, Cardiff University, Cardiff, 2001.
[13] T. Sparks, D. Kountcheva, B. Bockelmann and R. Falconer, “Physical and Numerical Modelling of Groundwater and Surface-Water Interactions with a Conservative Tracer,” ISSMGE Proceedings of 5th International Congress on Environmental Geotechnics, Cardiff, June 2006.
[14] J. Baer, “Dynamics of Fluids in Porous Media,” American Elsevier Publishing Company Inc., New York, 1972.
[15] H. Darcy, “Les Fontaines Publiques de la Ville de Dijon,” Dalmont, Paris, 1856.
[16] K. Spanoudaki, A. Nanou, A. I. Stamou, G. Christodoulou, T. Sparks, B. Bockelmann and R. A. Falconer, “Integrated Surface Water-Groundwater Modelling,” Global Network of Environmental Science and Technology (NEST) Journal, Vol. 7, No. 3, 2005.
[17] EC, “Directive 2000/60/EC of the European Parliament and of the Council of 23 October 2000 Establishing a Framework for Community Action in the Field of Water Policy,” European Parliament and Council 2000/60/EC, 2000.
[18] BS1377, “Determination of Permeability by the Constant-Head Method,” British Standards, Part 5, 1990.
[19] J. Dupuit, “études Théoriques et Pratiques sur le Mouvement des eaux,” Dunos, Paris, 1863.
[20] H. Rouse, “Engineering Hydraulics,” John Wiley & Sons, Inc., Hoboken, 1950.
[21] Turner_Designs, “Application Support Bulletin 103: Fluorescein and a Fluorometer,” 2006. http://www.turnerdesigns.com/t2/doc/appnotes/998_5103.html

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.