Modeling of Energy Processes in Wheel-Rail Contacts Operating under Influence of Periodic Discontinuous Forces

Zdzislaw Trzaska

Department of Management, Warsaw University of Ecology and Managemenet, Warsaw, Poland.

DOI: 10.4236/jtts.2012.22014                

Abstract

In this paper we present new numerical simulation approaches for determining the energy processes under periodic conditions caused by time-discontinuous forces in the wheel-rail contacts. The main advantage of the presented method is the total elimination of frequency analysis, which in effect introduces important simplifications in the identification of the effects in the contact. The second important feature is the fact that the method is based on the analysis of appropriate loops on the energy phase plane leading to an easy estimation of the rail strength through the evaluation of the loop’s area. That model based simulation in the applied dynamics relies on advanced methods for model setup, robust and efficient numerical solution techniques and powerful simulation tools for practical applications. Fundamental properties of contact displacements of the rail surface have been considered on the basis of the newly established method. The contact zone between railway wheels and the rail surfaces made of bulk materials is perceived as strong enough to resist the normal (vertical) forces introduced by heavy loads and the dynamic response induced by track and wheel irregularities. The analysis is carried out for a wheel running on an elastic rail rested on sleepers arranged on completely rigid foundation. The equations of displacement motion are established through the application of the Lagrange equations approach. The established model of the wheel-rail contact dynamics has been applied to that same roll plane but with taking into account a nonlinear characteristic of the sleeper with respect to the ground. Attention then is focused completely on the modeling of the energy absorbed by the rail. The applied method employs the energy state variables as time functions leading to determine the susceptibility of a given contact on the strength induced by the rail roll.

Keywords

Wheel-Rail Contact; Energy Process; Periodic Discontinuous Force; One-Period Energy; Energy Loop

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	J. Kisilowski and K. Knothe, “Advanced Railway Vehicle Dynamics,” Technico-Scientific Publisher, Warsaw, 1991.
[2]	J. Targosz, “Vibroisolation Systems in Railway and Automotive Transportation Applications,” AGH University Science &Technology Press, Cracow, 2007.
[3]	G. Schupp, “Computational Bifurcation Analysis: An Efficient Method for Studying Stationary and Periodic Motions,” SIMPACK User Meeting, Eisenach, 9-11 November 2004, pp. 1-9.
[4]	M. J. Steenbergen, “Modeling of Wheels and Rail Discontinuities in Dynamic Wheel-Rail Contact Analysis,” Vehicle System Dynamics, Vol. 44, No. 10, 2006, pp. 763-787. doi:10.1080/00423110600648535
[5]	J. Santamaria, E. G. Vadillo and J. Gomez, “Influence of Creep Forces on the Risk of Derailment of Railway Vehicles,” Vehicle System Dynamics, Vol. 47, No. 6, 2009, pp. 721-752. doi:10.1080/00423110802368817
[6]	S. Iwnicki, “Handbook of Railway Vehicle Dynamics,” Taylor & Francis, Boca Raton, 2006.
[7]	O. D. I. Nwokah and Y. Hurmuzu, “The Mechanical Systems Design Handbook: Modeling, Measurements and Control,” CRC Press, London, 2002.
[8]	C. W. de Silva, “Vibrations. Fundamentals and Practice,” CRC Press, London, 2000.
[9]	H. Bachman, et al., “Vibration Problems in Structures,” Birkh?user-Verlag, Basel, 1995. doi:10.1007/978-3-0348-9231-5
[10]	H. Benaroua, “Mechanical Vibrations. Analysis, Uncertain Control,” Marcel Dekker, New York, 2004.
[11]	G. Schupp, C. Weidemann and L. Mauer, “Modeling the Contact between Wheel and Rail within Multibody System Simulation,” Vehicle System Dynamics, Vol. 41, No. 5, 2004, pp. 349-364. doi:10.1080/00423110412331300326
[12]	J. Piotrowski and W. Kik, “A Simplified Model of Wheel/Rail Contact Mechanics for Non-Hertzian Problems and Its Application in Rail Vehicle Dynamic Simulations,” Vehicle System Dynamics, Vol. 46, No. 1-2, 2008, pp. 27-48. doi:10.1080/00423110701586444
[13]	Y. Bezin, S. D. Iwnicki and M. Cavallett, “The Effect of Dynamic Rail Roll on the Wheel-Rail Contact Conditions,” Vehicle System Dynamics, Vol. 46, No. 1, 2008, pp. 107-117. doi:10.1080/00423110701882348
[14]	U. von Wagner, “Nonlinear Dynamic Behavior of a Railway Wheelset,” Vehicle. System. Dynamics, Vol. 47, No. 5, 2009, pp. 627-640. doi:10.1080/00423110802331575
[15]	A. Alonso and J. G. Giménez, “Non-Steady State Modeling of Wheel-Rail Contact Problem for the Dynamic Simulation of Railway Vehicles,” Vehicle System Dynamics, Vol. 46, No. 3, 2008, pp. 179-196. doi:10.1080/00423110701248011
[16]	K. Zboinski and M. Dusza, “Bifurcation Approach to the Influence of Rolling Radius Modeling and Rail Inclination on the Stability of Railway Vehicles in a Curved Track,” Vehicle System Dynamics, Vol. 46, No. 1, 2008, pp. 1023-1037. doi:10.1080/00423110802037255
[17]	K. Knothe and S. Stichel, “Schienenfahrzeugdynamik,” Springer, Berlin, 2007.
[18]	R. P. Feynman, “There’s Plenty of Room at the Bottom: An Invitation to Enter a New World of Physics,” Caltech Engineering and Science, Vol. 23, No. 5, 1960, pp. 22-36. http://www.zyvex.com/nanotech/feynman.html
[19]	C. W. de Silva, “Vibration and Shock Handbook,” Taylor & Francis, Boca Raton, 2005.
[20]	K. E. Drexler, “Nanosystems: Molecular Machinery, Manu- facturing, and Computation,” Wiley, New York, 1992.
[21]	V. L. Popov, et al., “Friction Coefficient in ‘Rail-Wheel’- Contacts as a Function of Material and Loading Parameters,” Physical Mesomechanics, Vol. 5, No. 3, 2002, pp. 113-120.
[22]	A. A. Shabanaa, K. E Zaazaaa, J. L. Escalonab and J. R. Sany, “Development of Elastic Force Model for Wheel/- Rail Contact Problems,” Journal of Sound and Vibrations, Vol. 269, No. 1-2, 2004, pp. 295-325. doi:10.1016/S0022-460X(03)00074-9
[23]	R. von Schwerin, “Multibody System Simulation: Nu- merical Methods, Algorithms, and Software,” Springer- Verlag, Berlin, 1999.
[24]	D. T. Greenwood, “Advanced Dynamics,” CUP, Cambridge, 2003.
[25]	J. Misiak and S. Stachura, “Selected Problems of Static Stability and Dynamics of Rod and Shell Structures,” Publishing Office of the Warsaw University of Ecology and Management, Warsaw, 2010.
[26]	W. Blajer, “An Improved Formulation for Constrained Multibody Systems with Singularities,” ZAMM, 81, 2000, pp. 265-266.
[27]	A. Orlova, Y. Boronenko, H. Scheffel, R Fr?hling and W. Kik, “Tuning von üterwagendrehgestellen Durch Rad- satzkopplungen,” ZEV-Glasers Annalen, Vol. 126, No. 4, 2002, pp. 270-282.
[28]	J. Evans and S. Iwnicki, “Vehicle Dynamics and the Wheel Rail Interface,” http://www.railtechnologyunit.com
[29]	D. Karnopp, “Vehicle Stability,” Marcel Dekker Inc., New York, 2004. doi:10.1201/9780203913567
[30]	Z. Trzaska and W. Marszalek, “Periodic Solutions of DAEs with Applications to Dissipative Electric Circuits,” Proceedings of the IASTED Conference Modeling, Identification and Control, Lanzarote, 6-8 February 2006, pp. 309-314.
[31]	Z. Trzaska, “Straightforward Method for Studies of Periodic Non-Harmonic States of Linear Systems,” Archive of Electrical Engineering, Vol. 53, No. 2, 2004, pp. 191- 215.
[32]	Z. Trzaska, “A New Approach to Shaping One-Period Energies of Dynamical Systems Operating in Non-Sinusoidal States,” Archive of Electrical Engineering, Vol. 54, No. 3, 2005, pp. 265-287.
[33]	Z. Trzaska and W. Marszalek, “Computing Periodic Solutions of Linear Differential-Algebraic Systems with Nonsinusoidal Excitations,” Archive of Electrical Engineering, Vol. 55, No. 3-4, 2006, pp. 255-271.
[34]	Z. Trzaska, “One-Period Energy in Dynamical Systems with Periodic Discontinuous Excitations,” Elektronika, Vol. 48, No. 3, 2007, pp. 26-32.
[35]	E. Zerzm, “Topics in Multidimensional Linear Systems Theory,” Springer, London, 2000.
[36]	R. R. Borrelli and C. S. Colleman, “Differential Equations: A Modeling Perspective,” Wiley, New York, 2004.