Design Consideration for Additive Manufacturing: Fused Deposition Modelling

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Open Journal of Applied Sciences

ISSN Print: 2165-3917
ISSN Online: 2165-3925
www.scirp.org/journal/ojapps
E-mail: ojapps@scirp.org

Google-based Impact Factor: 0.92
Citations h5-index & Ranking

Journals Menu

"Design Consideration for Additive Manufacturing: Fused Deposition Modelling"
written by Ala’aldin Alafaghani, Ala Qattawi, Muhammad Ali Ablat,
published by Open Journal of Applied Sciences, Vol.7 No.6, 2017

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Solution-Processable PEDOT Particles for Coatings of Untreated 3D-Printed Thermoplastics
	… Applied Materials & …, 2023

[2]	Comparative finite element analysis of iso standard bolt using abs and pla material
	Materials Today: Proceedings, 2023

[3]	Fused filament fabrication: a state-of-the-art review of the technology, materials, properties and defects
	International Journal on …, 2022

[4]	Supportless Lattice Structure for Additive Manufacturing of Functional Products and the Evaluation of Its Mechanical Property at Variable Strain Rates
	Materials, 2022

[5]	DREAM: a design assistant for assessing additive manufacturability
	International Journal of …, 2022

[6]	Algorithm for Applying 3D Printing in Prototype Realization in Accordance with Circular Production and the 6R Strategy: Case-Enclosure for Industrial Temperature …
	… Research and Numerical Simulation in Applied …, 2022

[7]	Additive Manufacturing and Its Application in Civil Engineering, Industrial Automation and Sustainability
	Human-Automation Interaction: Manufacturing …, 2022

[8]	Assessment of the Viability of using 3D printing for the Design and Prototyping of Historical Artifacts as Replicas
	Acain, DC Rivera… - Advance Sustainable …, 2022

[9]	Origami-Inspired Mechanical Metamaterials
	2022

[10]	Comparative design and analysis of ISO standard bolt using polylactic acid (PLA) and alloy steel
	Materials Today: Proceedings, 2022

[11]	Development of Texture Mapping Approaches for Additively Manufacturable Surfaces
	Chinese Journal of …, 2022

[12]	Development of An Emergency Shelter Using 4D Printing
	2022

[13]	Propriétés mécaniques et stabilité dimensionnelle des biocomposites fabriqués par impression 3D par extrusion de filament
	2022

[14]	Investigation of different parameters of cube printed using PLA by FDM 3D printer
	Materials Today …, 2022

[15]	Investigation of the manufacturability of a copper coil for use in space components by means of the fused filament fabrication process
	CEAS Space Journal, 2022

[16]	Homogenization and Solution Annealing Heat Treatments of Powder Bed Fused Inconel 718
	JOM, 2022

[17]	A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures
	Materialia, 2022

[18]	Material design factors in the additive manufacturing of Carbon Fiber Reinforced Plastic Composites: A review
	Advances in Industrial and Manufacturing …, 2022

[19]	Estudio del comportamiento estructural de componentes fabricados mediante Modelado
	2022

[20]	Algoritam za primenu 3D štampe u projektovanju ili modifikaciji proizvoda
	Zbornik radova JUSK …, 2021

[21]	Fused deposition modelling: Current status, methodology, applications and future prospects
	Vicent, MM Tambuwala, SS Hassan… - Additive …, 2021

[22]	A review on voids of 3D printed parts by fused filament fabrication
	Journal of Materials …, 2021

[23]	3D printing of metals using biodegradable cellulose hydrogel inks
	Additive …, 2021

[24]	Geometrical Degrees of Freedom for Cellular Structures Generation: A New Classification Paradigm
	2021

[25]	Optimization of process parameters in fused deposition modelling of thermoplastics: A review
	2021

[26]	Composite filaments OF PHBV reinforced with ZrO 2· nH 2 O particles for 3D printing
	2021

[27]	Photocurable magnetic materials with tailored functional properties
	2021

[28]	Chitosan-based 3D-printed scaffolds for bone tissue engineering
	2021

[29]	From Gantry-Based Machine to Robot-Based Fused Deposition Modelling: A State-of-the-Art
	2021

[30]	A review of three-dimensional printing for pharmaceutical applications: quality control, risk assessment and future perspectives
	2021

[31]	Analytical models to estimate the structural behaviour of fused deposition modelling components
	2021

[32]	Fused Deposition Modeling Based 3D Printing: Design, Ideas, Simulations
	2021

[33]	A Material-Driven Design Approach Methodology in 3D Printing Waste Recycling
	Sustainability for 3D …, 2021

[34]	Modified Solution Annealing Heat Treatments of Powder Bed Fused Inconel 718
	2021

[35]	Design for Additive Manufacturing: Topology Optimization of Structures under Design-Dependent Loads and Manufacturing Constraints
	2021

[36]	Effect of Process Parameters and Postprocessing on Mechanical Properties of Additive Manufacturing Polylactic Acid Obtained by Fused Deposition Modeling
	López, M Hernández-Molina… - 3D Printing and …, 2021

[37]	On flexural and pull out properties of smart polymer based 3D printed functional prototypes
	Sādhanā, 2021

[38]	Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology
	2021

[39]	Modelling the process of fused deposition modelling and the effect of temperature on the mechanical, roughness, and porosity properties of resulting …
	2021

[40]	Topological Optimization of Brake Pedal for Metal Additive Manufacturing: A Case Study
	2021

[41]	A combined analytical and experimental approach for prediction of properties of Fused Deposition Modeling (FDM) parts
	2020

[42]	Minimizing Stringing Issues In FDM Printing
	Preprint, 2020

[43]	Wear assessment of 3-D printed parts of PLA (polylactic acid) using Taguchi design and Artificial Neural Network (ANN) technique
	2020

[44]	On effect of chemical-assisted mechanical blending of barium titanate and graphene in PVDF for 3D printing applications
	2020

[45]	Mining Design Heuristics for Additive Manufacturing Via Eye-Tracking Methods and Hidden Markov Modeling
	2020

[46]	Characterizing Implicit Cognitive Process in Engineering Design Across Contexts using Machine Learning Methods
	2020

[47]	Development of a CT imaging phantom of anthromorphic lung using fused deposition modeling 3D printing
	2020

[48]	Novel origami-inspired metamaterials: Design, mechanical testing and finite element modelling
	2020

[49]	اثر نانو‌لوله‌های کربن چنددیواره بر خواص کششی و کیفیت چاپ نانوکامپوزیت‌های آکریلونیتریل-بوتادی‌ان-استیرن چاپ‌شده سه‌بعدی‎
	2020

[50]	Mechanical and Thermo-mechanical Properties of Carbon fiber Reinforced Thermoplastic Composite Fabricated Using Fused Deposition Modeling Method
	2020

[51]	Origami spring–inspired metamaterials and robots: An attempt at fully programmable robotics
	2020

[52]	Influence of Multi-Walled Carbon Nanotubes on Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites
	Iranian Journal of …, 2020

[53]	Kustomisasi sistem cad yang terintegrasi untuk pengerjaan fused deposition model dalam aditive manufaktur denganmesin 3d printer
	2020

[54]	Comparison of Real-Time Geometric Analyses to Predict Warping Deformation in Fused Filament Fabrication
	2020

[55]	Implementation of 6R strategy in FDM printing process: Case: Small electronic enclosure box
	2020

[56]	Desenvolvimento de uma plataforma de impressão 3d baseada em braço robótico
	2019

[57]	Microstructure and mechanical properties of direct metal laser–sintered 15-5PH steel with different solution annealing heat treatments
	2019

[58]	Integrated CAD customization system for fused deposition models in additive manufacture with 3D printing machine
	2019

[59]	Topology optimization method with elimination of enclosed voids
	2019

[60]	A CASE STUDY ON THE GENERATION OF TREE-LIKE SUPPORTS FOR FUSED DEPOSITION MODELLING
	Conference Paper, 2019

[61]	Experimental Characterization of the Influence of Nozzle Temperature in FDM 3D Printed Pure PLA and Advanced PLA+
	2019

[62]	A support interface method for easy part removal in directed energy deposition
	2019

[63]	Method for load-capable path planning in multi-axis fused deposition modeling
	2019

[64]	A design framework for additive manufacturing
	2019

[65]	DEVELOPMENT OF A COMBINED ANALYTICAL AND EXPERIMENTAL APPROACH FOR THE DETERMINATION OF THE COHESIVE STRENGTH BETWEEN …
	2019

[66]	Manufacturing Letters
	2019

[67]	A METHODOLOGY FOR TRIAGING PRODUCT NEEDS FOR LOCALIZED MANUFACTURING WITH 3D PRINTING IN LOW-RESOURCE ENVIRONMENTS
	2019

[68]	On the measure of the aesthetic quality of 3D printed plastic parts
	2019

[69]	Process and resource selection methodology in design for additive manufacturing
	2019

[70]	Design and analysis of ISO standard bolt and nut in FDM 3D printer using PLA and ABS materials
	2019

[71]	An Ontology for Supporting Digital Manufacturability Analysis
	2019

[72]	Metal bellow hydroforming using additive manufactured die: a case study
	2019

[73]	Interactive design for additive manufacturing: a creative case of synchronous belt drive
	International Journal on Interactive Design and Manufacturing (IJIDeM), 2018

[74]	Topology optimization of self-supporting structures with polygon features for additive manufacturing
	Computer Methods in Applied Mechanics and Engineering, 2018

[75]	MECHANICAL AND THERMOMECHANICAL PROPERTIES OF CARBON FIBRE REINFORCED THERMOPLASTIC COMPOSITE FABRICATED USING FUSED …
	2018

[76]	Additive Manufacturing with 3D Printing: Progress from Bench to Bedside
	The AAPS Journal, 2018

[77]	Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method
	Journal of Manufacturing Processes, 2018

[78]	Selected problems of design and manufacturing of tailored swimming prosthesis
	AIP Conference Proceedings, 2018

[79]	Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals
	The International Journal of Advanced Manufacturing Technology, 2018

[80]	Toward integrated design of additive manufacturing through a process development model and multi-objective optimization
	2018

[81]	Integrated Design of Additive Manufacturing Based on Design for Manufacturing and Skin-skeleton Models
	2018

[82]	A Study of Fused Deposition Modeling (FDM) 3-D Printing Using Mechanical Testing and Thermography
	2018

[83]	ATMOSFERİK BASINÇLI PLAZMA UYGULAMASININ 3B BASKILARA ETKİSİNİN İNCELENMESİ


[84]	A Review and Investigation on Properties of Clay Compatible for Additive Manufacturing
	S Hemaraju, A Subramanian, A Singh

[85]	An Overview of Additive Manufacturing Applications in Artificial Reefs to Restore Marine Ecosystems
	Pires

[86]	Desenvolvimento de filamentos de PHBV/fibras de celulose da palmeira para impressão 3D de scaffolds
	NC Zanini

[1]	Human-Automation Interaction Automation, Collaboration, & E-Services, 2023 DOI:10.1007/978-3-031-10780-1_27

[2]	Experimental Research and Numerical Simulation in Applied Sciences Lecture Notes in Networks and Systems, 2023 DOI:10.1007/978-3-031-19499-3_3

[3]	Solution-Processable PEDOT Particles for Coatings of Untreated 3D-Printed Thermoplastics ACS Applied Materials & Interfaces, 2023 DOI:10.1021/acsami.2c18328

[4]	Effect of Process Parameters and Postprocessing on Mechanical Properties of Additive Manufacturing Polylactic Acid Obtained by Fused Deposition Modeling 3D Printing and Additive Manufacturing, 2023 DOI:10.1089/3dp.2021.0052

[5]	Chitosan Nanocomposites Biological and Medical Physics, Biomedical Engineering, 2023 DOI:10.1007/978-981-19-9646-7_16

[6]	Solution-Processable PEDOT Particles for Coatings of Untreated 3D-Printed Thermoplastics ACS Applied Materials & Interfaces, 2023 DOI:10.1021/acsami.2c18328

[7]	Additive Manufacturing Design and Applications 2023 DOI:10.31399/asm.hb.v24A.a0006948

[8]	Additive Manufacturing: Design, Processes and Applications SpringerBriefs in Applied Sciences and Technology, 2023 DOI:10.1007/978-3-031-33793-2_2

[9]	Investigation of the manufacturability of a copper coil for use in space components by means of the fused filament fabrication process CEAS Space Journal, 2023 DOI:10.1007/s12567-022-00475-8

[10]	Effect of raster and layer characteristics on tensile behavior and failure of FFF printed PLA samples by representative volume element model Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2023 DOI:10.1177/09544054231202210

[11]	A post-topology optimization process for overhang elimination in additive manufacturing: design workflow and experimental investigation The International Journal of Advanced Manufacturing Technology, 2023 DOI:10.1007/s00170-023-12282-4

[12]	Fused filament fabrication: A state-of-the-art review of the technology, materials, properties and defects International Journal on Interactive Design and Manufacturing (IJIDeM), 2023 DOI:10.1007/s12008-022-01026-5

[13]	Additive Manufacturing Design and Applications 2023 DOI:10.31399/asm.hb.v24A.a0006948

[14]	Digital Design and Manufacturing of Medical Devices and Systems 2023 DOI:10.1007/978-981-99-7100-8_12

[15]	Fused filament fabrication: A state-of-the-art review of the technology, materials, properties and defects International Journal on Interactive Design and Manufacturing (IJIDeM), 2022 DOI:10.1007/s12008-022-01026-5

[16]	A Comprehensive Analysis on the Processing-Structure-Property Relationships of Fdm-Based 3-D Printed Polyetheretherketone (Peek) Structures SSRN Electronic Journal , 2022 DOI:10.2139/ssrn.4047836

[17]	Composite filaments OF PHBV reinforced with ZrO2·nH2O particles for 3D printing Polymer Bulletin, 2022 DOI:10.1007/s00289-021-03610-3

[18]	Supportless Lattice Structure for Additive Manufacturing of Functional Products and the Evaluation of Its Mechanical Property at Variable Strain Rates Materials, 2022 DOI:10.3390/ma15227954

[19]	ATMOSFERİK BASINÇLI PLAZMA UYGULAMASININ 3B BASKILARA ETKİSİNİN İNCELENMESİ Uludağ University Journal of The Faculty of Engineering, 2022 DOI:10.17482/uumfd.1087623

[20]	Comparative finite element analysis of ISO standard bolt using ABS and PLA material Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.09.063

[21]	Investigation of the manufacturability of a copper coil for use in space components by means of the fused filament fabrication process CEAS Space Journal, 2022 DOI:10.1007/s12567-022-00475-8

[22]	On effect of chemical-assisted mechanical blending of barium titanate and graphene in PVDF for 3D printing applications Journal of Thermoplastic Composite Materials, 2022 DOI:10.1177/0892705720945377

[23]	Sustainability for 3D Printing Springer Tracts in Additive Manufacturing, 2022 DOI:10.1007/978-3-030-75235-4_6

[24]	Development of Texture Mapping Approaches for Additively Manufacturable Surfaces Chinese Journal of Mechanical Engineering, 2022 DOI:10.1186/s10033-022-00766-5

[25]	Investigation of different parameters of cube printed using PLA by FDM 3D printer Materials Today: Proceedings, 2022 DOI:10.1016/j.matpr.2022.03.700

[26]	A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures Materialia, 2022 DOI:10.1016/j.mtla.2022.101427

[27]	A review on voids of 3D printed parts by fused filament fabrication Journal of Materials Research and Technology, 2021 DOI:10.1016/j.jmrt.2021.10.108

[28]	Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology Journal of Applied Polymer Science, 2021 DOI:10.1002/app.49625

[29]	Fused deposition modelling: Current status, methodology, applications and future prospects Additive Manufacturing, 2021 DOI:10.1016/j.addma.2021.102378

[30]	On flexural and pull out properties of smart polymer based 3D printed functional prototypes Sādhanā, 2021 DOI:10.1007/s12046-021-01709-x

[31]	Effect of Process Parameters and Postprocessing on Mechanical Properties of Additive Manufacturing Polylactic Acid Obtained by Fused Deposition Modeling 3D Printing and Additive Manufacturing, 2021 DOI:10.1089/3dp.2021.0052

[32]	Analytical models to estimate the structural behaviour of fused deposition modelling components Rapid Prototyping Journal, 2021 DOI:10.1108/RPJ-07-2020-0145

[33]	Photocurable magnetic materials with tailored functional properties Composites Part C: Open Access, 2021 DOI:10.1016/j.jcomc.2021.100143

[34]	Fused Deposition Modeling Based 3D Printing Materials Forming, Machining and Tribology, 2021 DOI:10.1007/978-3-030-68024-4_2

[35]	The Feature-Driven Method for Structural Optimization 2021 DOI:10.1016/B978-0-12-821330-8.00008-0

[36]	Geometrical Degrees of Freedom for Cellular Structures Generation: A New Classification Paradigm Applied Sciences, 2021 DOI:10.3390/app11093845

[37]	Chitosan-based 3D-printed scaffolds for bone tissue engineering International Journal of Biological Macromolecules, 2021 DOI:10.1016/j.ijbiomac.2021.05.215

[38]	Usabilidade e afetividade no design distribuído: um estudo sobre a qualidade visual e háptica percebida dos produtos utilitários fabricados por impressão 3D FDM por laboratórios independentes Blucher Design Proceedings, 2021 DOI:10.5151/isspppgdesign-18

[39]	3D printing of metals using biodegradable cellulose hydrogel inks Additive Manufacturing, 2021 DOI:10.1016/j.addma.2021.102380

[40]	Modelling the Process of Fused Deposition Modelling and the Effect of Temperature on the Mechanical, Roughness, and Porosity Properties of Resulting Composite Products Mechanics of Composite Materials, 2021 DOI:10.1007/s11029-021-09925-6

[41]	Origami spring–inspired metamaterials and robots: An attempt at fully programmable robotics Science Progress, 2020 DOI:10.1177/0036850420946162

[42]	Development of a CT imaging phantom of anthromorphic lung using fused deposition modeling 3D printing Medicine, 2020 DOI:10.1097/MD.0000000000018617

[43]	Development of a CT imaging phantom of anthromorphic lung using fused deposition modeling 3D printing Medicine, 2020 DOI:10.1097/MD.0000000000018617

[44]	Novel origami-inspired metamaterials: Design, mechanical testing and finite element modelling Materials & Design, 2020 DOI:10.1016/j.matdes.2019.108242

[45]	Mechanical and Thermo-mechanical Properties of Carbon fiber Reinforced Thermoplastic Composite Fabricated Using Fused Deposition Modeling Method Materials Today: Proceedings, 2020 DOI:10.1016/j.matpr.2020.03.012

[46]	Origami spring–inspired metamaterials and robots: An attempt at fully programmable robotics Science Progress, 2020 DOI:10.1177/0036850420946162

[47]	Mining Design Heuristics for Additive Manufacturing Via Eye-Tracking Methods and Hidden Markov Modeling Journal of Mechanical Design, 2020 DOI:10.1115/1.4048410

[48]	Topology optimization method with elimination of enclosed voids Structural and Multidisciplinary Optimization, 2019 DOI:10.1007/s00158-019-02204-y

[49]	A design framework for additive manufacturing The International Journal of Advanced Manufacturing Technology, 2019 DOI:10.1007/s00170-019-03627-z

[50]	Metal bellow hydroforming using additive manufactured die: a case study Rapid Prototyping Journal, 2019 DOI:10.1108/RPJ-07-2018-0182

[51]	An Ontology for Supporting Digital Manufacturability Analysis Procedia CIRP, 2019 DOI:10.1016/j.procir.2019.03.211

[52]	Process and resource selection methodology in design for additive manufacturing The International Journal of Advanced Manufacturing Technology, 2019 DOI:10.1007/s00170-019-03991-w

[53]	DEVELOPMENT OF A COMBINED ANALYTICAL AND EXPERIMENTAL APPROACH FOR THE DETERMINATION OF THE COHESIVE STRENGTH BETWEEN MATERIAL EXTRUSION LAYERS USING THE TRUE AREA OF CONTACT Additive Manufacturing, 2019 DOI:10.1016/j.addma.2019.100832

[54]	Design and analysis of ISO standard bolt and nut in FDM 3D printer using PLA and ABS materials Materials Today: Proceedings, 2019 DOI:10.1016/j.matpr.2019.07.737

[55]	Method for load-capable path planning in multi-axis fused deposition modeling Procedia CIRP, 2019 DOI:10.1016/j.procir.2019.04.188

[56]	Microstructure and mechanical properties of direct metal laser–sintered 15-5PH steel with different solution annealing heat treatments The International Journal of Advanced Manufacturing Technology, 2019 DOI:10.1007/s00170-019-04404-8

[57]	Integrated CAD customization system for fused deposition models in additive manufacture with 3D printing machine IOP Conference Series: Materials Science and Engineering, 2019 DOI:10.1088/1757-899X/694/1/012008

[58]	Method for load-capable path planning in multi-axis fused deposition modeling Procedia CIRP, 2019 DOI:10.1016/j.procir.2019.04.188

[59]	An Ontology for Supporting Digital Manufacturability Analysis Procedia CIRP, 2019 DOI:10.1016/j.procir.2019.03.211

[60]	Toward integrated design of additive manufacturing through a process development model and multi-objective optimization The International Journal of Advanced Manufacturing Technology, 2018 DOI:10.1007/s00170-018-1880-6

[61]	Topology optimization of self-supporting structures with polygon features for additive manufacturing Computer Methods in Applied Mechanics and Engineering, 2018 DOI:10.1016/j.cma.2018.01.037

[62]	Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals The International Journal of Advanced Manufacturing Technology, 2018 DOI:10.1007/s00170-018-2586-5

[63]	Selected problems of design and manufacturing of tailored swimming prosthesis 2018 DOI:10.1063/1.5056268

[64]	Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method Journal of Manufacturing Processes, 2018 DOI:10.1016/j.jmapro.2018.09.025

[65]	Interactive design for additive manufacturing: a creative case of synchronous belt drive International Journal on Interactive Design and Manufacturing (IJIDeM), 2017 DOI:10.1007/s12008-017-0453-5

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Open Journal of Applied Sciences

Open Journal of Applied Sciences

Journals Menu

Home

About SCIRP

Service

Policies