|
[1]
|
Synchrotron radiation micro-CT with phase contrast for high-temperature in-situ microstructural characterization of AlSn composite phase change materials
|
|
Materials Characterization,
2022 |
|
|
|
|
[2]
|
Capability of active thermography to detect and localize pores in Metal Additive Manufacturing materials
|
|
2021 |
|
|
|
|
[3]
|
Statistical analysis of spatial distribution of pores in metal additive manufacturing
|
|
Additive Manufacturing,
2021 |
|
|
|
|
[4]
|
レーザ積層造形により作製した Al-10% Si-0.4% Mg 合金における熱間等方加圧処理の影響
|
|
2019 |
|
|
|
|
[5]
|
Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy
|
|
2019 |
|
|
|
|
[6]
|
A Methodology to Evaluate the Reliability Impact of the Replacement of Welded Components by Additive Manufacturing Spare Parts
|
|
2019 |
|
|
|
|
[7]
|
Considerations for Application of Additive Manufacturing to Nuclear Reactor Core Components
|
|
2019 |
|
|
|
|
[8]
|
Additive Manufacturing for Nuclear Power Plant Applications
|
|
2019 |
|
|
|
|
[9]
|
Accepted by IISE Transactions (Special Issue on Additive Manufacturing) on 5/10/2018
|
|
2018 |
|
|
|
|
[10]
|
Layer-wise spatial modeling of porosity in additive manufacturing
|
|
IISE Transactions,
2018 |
|
|
|
|
[11]
|
The three-dimensional structure of flexible resorcinol-formaldehyde aerogels investigated by means of holotomography
|
|
Journal of Sol-Gel Science and Technology,
2017 |
|
|
|
|
[12]
|
Investigation of pore structure in cobalt chrome additively manufactured parts using X-ray computed tomography and three-dimensional image analysis
|
|
Additive Manufacturing,
2017 |
|
|
|
|
[13]
|
Heterogeneous Sensor Data based Online Quality Assurance for Advanced Manufacturing using Spatiotemporal Modeling
|
|
2017 |
|
|
|
|
[14]
|
Additive manufacturing of metallic components–process, structure and properties
|
|
Progress in Materials Science,
2017 |
|
|
|
|
[15]
|
Additive Manufacturing
|
|
2017 |
|
|
|
|
[16]
|
Pore size studies of high temperature microwave assisted powder sintered Ti6AL4V components using X–ray Micro-Computed Tomography (CT)
|
|
2017 |
|
|
|
|
[17]
|
Usage of Industrial Computed Tomography for Evaluation of Custom-Made Implants
|
|
Applications of Computational Intelligence in Biomedical Technology,
2016 |
|
|
|
|
[18]
|
Potential for Synchrotron radiation based NDE in Aerospace Industry
|
|
2016 |
|
|
|
|
[19]
|
Critical appraisal of studies on dentinal radicular microcracks in endodontics: methodological issues, contemporary concepts, and future perspectives
|
|
Endodontic Topics,
2015 |
|
|
|
|
[20]
|
Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding
|
|
The journal of advanced prosthodontics,
2015 |
|
|
|
|
[21]
|
Characterization of nanoreinforcement dispersion in inorganic nanocomposites: A Review
|
|
Materials,
2014 |
|
|
|
|
[22]
|
Porosity measurements and analysis for metal additive manufacturing process control
|
|
Journal of research of the National Institute of Standards and Technology,
2014 |
|
|
|
|
[23]
|
DIMENSIONAL VERIFICATION AND QUALITY CONTROL OF IMPLANTS PRODUCED BY ADDITIVE MANUFACTURING
|
|
Quality Innovation Prosperity,
2014 |
|
|
|
|
[24]
|
金属粉末レーザ積層造形法により作製した Al–10% Si–0.4% Mg 合金の組織と機械的性質
|
|
粉体および粉末冶金,
2014 |
|
|
|
|
[25]
|
Annealing of Co-Cr dental alloy: effects on nanostructure and Rockwell hardness
|
|
The journal of advanced prosthodontics,
2013 |
|
|
|
|
[26]
|
Alternative impression technique for multiple abutments in difficult case to control
|
|
The Journal of Advanced Prosthodontics,
2012 |
|
|
|