Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"The Effects of Filler Contents and Particle Sizes on the Mechanical and End-Use Properties of Snail Shell Powder Filled Polypropylene"
written by Genevive C. Onuegbu, Isaac O. Igwe,
published by Materials Sciences and Applications, Vol.2 No.7, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] ردوپ رثا یبرجت هعلاطم راتخاس ونان موینیمولآ صاوخ رب کی‎
[2] مطالعه تجربي اثر پودر آلومينيوم نانو ساختار بر خواص يك PBX پايه HMX‎
[3] Thermal, mechanical and barrier properties of rice husk ash biosilica toughened epoxy biocomposite coating for structural application
Progress in Organic Coatings, 2022
[4] Mechanical and optimization studies of polypropylene hybrid biocomposites
Scientific Reports, 2022
[5] Comparative Reinforcement Effect of Achatina fulica Snail Shell Nanoparticles, Montmorillonite, and Kaolinite Nanoclay on the Mechanical and Physical Properties of …
Polymers, 2022
[6] Development of carbonized wood/silicon dioxide composite tailored for single-density shoe sole manufacturing
Materials Today …, 2022
[7] A PMMA bone cement with improved antibacterial function and flexural strength
Journal of Biomaterials Science, Polymer …, 2022
[8] Mechanical and optimization studies of polyethylene/snail shell/kenaf fiber hybrid bio composite
Materials Today …, 2022
[9] PISTON
Journal of Technical Engineering …, 2022
[10] اثر نانو ذرات میله‌ای‌شکل اکسید آهن هماتیت بر خواص یک پیشرانه جامد مرکب‎
Iranian Scientific Association of Energetic …, 2021
[11] Ekstraksi dan Karakterisasi CaO Berbasis Cangkang Bekicot dari Ponggok Blitar sebagai Raw Material Biokeramik
TRANSMISI, 2021
[12] Optimization of flexural strength of recycled polyethylene-terephthalate (PET) eco-composite using response surface methodology
E3S Web of …, 2021
[13] Static investigation of almond shell particulate reinforced aquilaria agallocha roxb blended epoxy hybrid matrix composite
Digest Journal of …, 2021
[14] Property Correlations of Polypropylene based Composites Filled with Mimusop elengi Seed Shell Powder
IOP Conference Series …, 2021
[15] Influence of pineapple leaf particulate on mechanical, thermal and biodegradation characteristics of pineapple leaf fiber reinforced polymer composite
2021
[16] Cement–paperboard composite for speaker/woofer casing: Experimental trend analysis (ETA) and performance evaluation
Cogent …, 2021
[17] The investigation of reinforcement properties of nano- CaCO3 synthesized from Achatina fulica snail shell through mechanochemical methods on epoxy …
2021
[18] Preparation of bottom-up graphene oxide using citric acid and tannic acid, and its application as a filler for polypropylene nanocomposites
2021
[19] Graphene nanoplatelets/organic wood dust hybrid composites: physical, mechanical and thermal characterization
2021
[20] Investigation of mechanical property of eco-friendly natural filler (ground nut, saw dust and hybrid shell) reinforced epoxy based composite
2021
[21] Ekstraksi dan Karakterisasi Ca (OH) 2 Berbasis Cangkang Bekicot dari Ponggok Blitar sebagai Raw Material Biokeramik
2021
[22] Static investigation of almond shell particulate reinforced aquilaria agallocha roxb blended epoxy hybrid matrix composite.
2021
[23] Mechanical properties of oil palm frond wood filled thermoplastic polyurethane
2020
[24] Hardness and Elastic Modulus of Al-Based Composite Developed from Aluminium Piston Scraps Using Alumina and Snail shell as Reinforcements
2020
[25] Experimental investigation of glass powder reinforced polymer composite
2020
[26] Effect of filler loading and size on the mechanical and morphological behaviour of natural fibre-reinforced polystyrene composites
2020
[27] Mechanical properties of calcium carbonate/eggshell particle filled polypropylene Composites
2020
[28] A Review on
2020
[29] Influence of wood dust fillers on the mechanical, thermal, water absorption and biodegradation characteristics of jute fiber epoxy composites
2020
[30] Studies on the mechanical and absorption properties of achatina fulica snail and eggshells reinforced composite materials
2020
[31] Preparation and characterization of natural fiber filled polystyrene composite using in situ polymerisation technique
2020
[32] Optimization of Milling Procedures for Synthesizing Nano-CaCO3 from Achatina fulica Shell through Mechanochemical Techniques
2020
[33] Mechanical Properties of Oil Palm Frond Wood Filled Thermoplastic Polyurethane.
2020
[34] Experiment investigation and analysis of fish scale reinforced polymer composite materials
2020
[35] Mechanical and dielectric behavior of LDPE/Bi-1212 films
2020
[36] Optimization of processing parameters and its effect on the mechanical properties of recycled low density polyethylene composite reinforced with Tetracarpidium …
2020
[37] Correlation between theoretical and experimental hardness, elastic modulus of discarded aluminium piston reinforced with zirconium diboride and snail shells
2020
[38] Influence of Fillers on the Thermal and Mechanical Properties of Biocomposites: An Overview
2020
[39] A Review on Nanocomposites. Part 1: Mechanical Properties
2020
[40] New Approaches to Improve the Attractiveness and Consumption of Rattus norvegicus for Forges Mixed with Grinded Land Snail, Eobania vermiculata, in Addition To …
2020
[41] Characterisation and development of new bio-filler using mimusops elengi seed shell powder for polypropylene composites
2020
[42] POLYSULFONE/GRAPHENE OXIDE MIXED MATRIX HOLLOW FIBER MEMBRANE FOR CARBON DIOXIDE REMOVAL
2019
[43] Understanding the effect of nanokaolins on the physical and mechanical properties of nylon based composites
2019
[44] AJ Csian OURNALOF HEMISTRY AJ Csian OURNALOF HEMISTRY
2019
[45] Assesement of the Biodegradability of Composites produced from Poly-Lactic Acid and Bamboo Flour
2019
[46] ارزیابی زیست‌تخریب‌پذیری چندسازه ساخته‌شده از پلی‌لاکتیک‌اسید و آرد بامبو‎
Majallah-i ?anāyi?-i chūb va kāghaz?-i īrān, 2019
[47] Chemical and mechanical properties analysis of extruded polyvinyl choloride (PVC)/sepiolite composite
2019
[48] Material flow influence on the quality of molded parts
2019
[49] The effects of particle size and content on Morphology and Mechanical Properties of Rice Straw and Coal Fly Ash filled-Polypropylene Composites
2019
[50] Evaluation of the performance of helmet prototypes fabricated from acrylonitrile butadiene styrene composites filled with natural resource
2019
[51] Sea water absorption on corrosion and hardness properties of lining brake with hybrid particulates composites
2019
[52] Characterization and feasibility of Mimusops Elengi seed shell powder as filler for thermoplastic materials
2019
[53] Effect of maleic anhydride content on physico-mechanical properties of γ-irradiated waste polypropylene/corn husk fibers bio-composites
2019
[54] Preview of Monomer Molar Equivalency in Polyurethane System: A model study
2019
[55] Investigation on Mode I Interlaminar Fracture Toughness of Chemically Treated/Untreated Saw Dust Powder Based Jute Fabric Reinforced Epoxy Composite Structure
2019
[56] Mode-1 fracture toughness analysis of coffee bean powder reinforced polymer composite
2019
[57] Mechanical Characterization of the Natural Fiber Reinforced Polystyrene Composite
2019
[58] Effect of Filler Parameters on the Mechanical Properties of Wheat Husk Filled Polystyrene Composite
2019
[59] Mechanical and thermal properties of snail shell particles-reinforced bisphenol-A bio-composites
Polymer Bulletin, 2019
[60] Influence of filler loading on the mechanical and morphological properties of carbonized coconut shell particles reinforced polypropylene composites
2019
[61] Effect of particle sizes on the mechanical behaviour of limestone-reinforced hybrid plastics
2019
[62] The effects of filler contents and particle sizes on properties of green kenaf-filled natural rubber latex foam
2019
[63] WEAR ANALYSIS OF RICE HUSK SHELL POWDER REINFORCED EPOXY COMPOSITE
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)), 2019
[64] Tribological Behaviour of Periwinkle Shell Powder-Filled Recycled Polypropylene Composites
International Journal of Engineering and Technologies, 2019
[65] Effects of Snail Shell Powder on the Mechanical Properties of Low Density Polyethylene
2018
[66] Development of Piston Materials from Discarded Aluminum Piston Alloyed with Zirconium Diboride and Snailshells
International Journal of Advanced Science and Engineering, 2018
[67] Effects of Snail Shell Powder on the Mechanical Properties of Low Density Polyethylene (LDPE)
2018
[68] Snail Shell as an Inspiring Engineering Material in Science and Technology Development: A Review
2018
[69] Comparison of Some Mechanical Properties of Injection and Extrusion Moulded Pineapple Leaf Powder Filled High Density Polyethylene
2018
[70] Preparation and characterization of PPRC/EPDM thermoplastic vulcanizates: A comparative study
Journal of applied polymer science, 2018
[71] Effect of mineral fillers on mechanical, thermal and morphological properties of kenaf recycled polyethylene wood plastic composite
European Journal of Wood and Wood Products, 2018
[72] A new assessment on mechanical properties of jute fiber mat with egg shell powder/nanoclay-reinforced polyester matrix composites
Journal of Natural Fibers, 2018
[73] Production of Piston Material from discarded Aluminum Piston reinforced with Alumina and Snailshells
International Journal of Advanced Science and Engineering, 2018
[74] Production of piston material from discarded aluminium piston reinforced with alumina and snailshells
2018
[75] Effect of Modified Calcium Carbonate Filler on Properties of Poly (Propylene)/Layered Double Hydroxide Composites
2018
[76] The Effect of wheat straw particle size on the mechanical and water absorption properties of wheat straw/low density polyethylene biocomposites for packaging …
2017
[77] تاثیر اندازة ذرات کاه‌گندم بر ویژگی‌های مکانیکی و جذب آب چندسازه کاه‌گندم/پلی‌اتیلن سبک با کاربرد در بسته‌بندی‎
2017
[78] A feasibility study on using surface treated kaolin mineral in thermoplastic composites
2017
[79] Effect of filler loading and particle size on the mechanical properties of periwinkle shell filled recycled polypropylene composites
2017
[80] 이산화탄소 흡착 기능을 부여한 Microcrystalline Cellulose (MCC) 를 충전제로 사용한 폴리에틸렌 복합체 제조 및 그 물성에 관한 연구
2017
[81] The Effect of Particulate Fillers on Hardness of Polymer Composite
2017
[82] Evaluation of polypropylene hybrid composites containing glass fiber and basalt powder
Journal of Polymer Engineering, 2017
[83] Effect of gamma irradiation on the mechanical properties of PVC/ZnO polymer nanocomposite
Journal of Radiation Research and Applied Sciences, 2017
[84] Determination of some metal contents in ashed and unashed snail shell powders
2017
[85] Natural Filler based Composites: A Review
2017
[86] Mechanical Characteristics and Novel Applications of Hybrid Polymer Composites-A Review
2017
[87] Evaluation of Waste from Aluminum Industry as Filler in Polypropylene Composites
JOM, 2017
[88] Improvement in mechanical and thermal properties of unsaturated polyester-based hybrid composites
Iranian Polymer Journal, 2017
[89] Microstructure and Mechanical properties of Epoxy–Rice Husk Ash Composite
2017
[90] Effect of Filler Content and Particle Size on the Mechanical Properties of Corn Cob Powder Filled Recycled Polypropylene Composites
International Journal of Scientific Engineering and Applied Science, 2017
[91] Study on high-performance of WPC
2016
[92] Effect of Particle Size on Mechanical Properties of Sawdust-High Density Polyethylene Composites under Various Strain Rates
2016
[93] Recent Developments of Natural Fiber Reinforced Thermoset Polymer Composites and their Mechanical Properties
2016
[94] Graphene oxide/polysulfone hollow fiber mixed matrix membranes for gas separation
RSC Advances, 2016
[95] The effect of surface treatment on the mechanical properties of Poly (lactic acid)/Guineacorn husk particulate Bio-composites.
J. Mater. Environ. Sci., 2016
[96] Wear Resistance and Mechanical Behaviour of Epoxy/Mollusk Shell Biocomposites developed for Structural Applications.
Tribology in Industry, 2016
[97] Enhanced physico-mechanical properties of polyester resin film using CaCO3 filler
Fibers and Polymers, 2016
[98] Mechanical, dynamic mechanical, and thermal analysis of Shorea robusta-dispersed polyester composite
Natural Product Research, 2016
[99] A Study on the Mechanical Properties of Natural Rubber Vulcanizates Using Precipitated Silica and Treated Coir Pith as Filler
2016
[100] Mechanical and Chemical Resistance Properties of High Density Polyethylene Filled with Corncob and Coconut Fiber
International Research Journal of Pure and Applied Chemistry, 2016
[101] The effect of surface treatment on the mechanical properties of Poly (lactic acid)/Guinea corn husk particulate Bio-composites
2016
[102] Experimental Study on the Effect of Nano-Structured Aluminum Powder on the Properties
2016
[103] Tribology in Industry
2016
[104] 고밀도 폴리에틸렌과 실란 처리된 분쇄페놀수지 복합재의 제조 및 특성
2016
[105] Preparation and characterization of high density polyethylene/silane treated pulverized-phenol resin composites
2016
[106] PREPARASI DAN KARAKTERISASI LIMBAH BIOMATERIAL CANGKANG BEKICOT (Achatina fulica) DARI DESA GUNUNG MADU SEBAGAI BAHAN DASAR …
2016
[107] مطالعه تجربی اثر پودر آلومینیوم نانو ساختار بر خواص یک PBX پایه HMX‎
2016
[108] Mechanical properties of pineapple leaf powder filled high density polyethylene
2016
[109] Wear resistance and mechanical behaviour of epoxy/mollusk shell biocomposites developed for structural applications
Tribology in Industry, 2016
[110] Preparasi dan karakterisasi limbah biomaterial cangkang bekicot (Achatina fulica) dari desa gunung madu sebagai bahan dasar biokeramik
2016
[111] Effects of surface treated pineapple leaf powder and processing techniques on mechanical properties of high density polyethylene composites.
2015
[112] Mechanical Characterization of Low Cost Natural Fiber Particles Reinforced with Polymer Composites
Applied Mechanics and Materials, 2015
[113] LDPE composite films incorporating ceramic powder emitting far‐infrared radiation for advanced food‐packaging applications
Journal of Applied Polymer Science, 2015
[114] Soundproofing and Mechanical Properties of Nanofiller-reinforced Polypropylene Composites
2015
[115] Development and Characterization of Oyster Shell Powder Filled Polypropylene Composite
2014
[116] Morphological and Material Properties of Polyethyleneterephthalate (PET) Fibres with Spores Incorporated
Null, 2014
[117] The comparison of properties of (rubber tree seed shell flour)‐filled polypropylene and high‐density polyethylene composites
Journal of Vinyl and Additive Technology, 2014
[118] Thermo-Mechanical Properties of Unsaturated Polyester Reinforced with Coconut and Snail Shells
Journal of Polymer & Composites, 2014
[119] Mechanical Properties of Corn Husk Flour/PP Bio-composites
Composites Research (? ?????????), 2013
[120] Physical and mechanical properties of injection-molded wood powder thermoplastic composites
Advanced Composite Materials, 2013
[121] Effects of Particle Sizes, Filler Contents and Compatibilization On The Properties Of Linear Low Density Polyethylene Filled Periwinkle Shell Powder
SC Nwanonenyi, MU Obidiegwu, GC Onuegbu - theijes.com, 2013
[122] A Study on the mechanical properties of bio composites from renewable agro-waste/Poly (lactic acid)
2013
[123] ผล กระทบ ของ การ เติม พอ ต เต อ รี ส โตน ใน พอ ลิ โพ รพิ ลี น ต่อ สมบัติ เชิงกล และ สมบัติ การ หน่วง ไฟ
Thesis, 2013
[124] EFFECT OF FILLER LOADINGS ON THE END-USE PROPERTIES OF MAIZE TASSEL FILLED HIGH DENSITY POLYETHYLENE
Null, 2012
[125] Properties of Oil Palm Empty Fruit Bunch Fibre Filled High Density Polyethylene
International Journal of Engineering and Technology , 2012
[126] Effects of Maleic Anhydride on the Mechanical Properties and Morphology of Wheat Straw Fibre Reinforced Polypropylene (pp. 412-420)
2012
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top