Journal of Materials Science and Chemical Engineering

Journal of Materials Science and Chemical Engineering

ISSN Print: 2327-6045
ISSN Online: 2327-6053
www.scirp.org/journal/msce
E-mail: msce@scirp.org
"The Review of Powder Coatings"
written by Zhongyan Du, Shaoguo Wen, Jihu Wang, Changle Yin, Dayang Yu, Jian Luo,
published by Journal of Materials Science and Chemical Engineering, Vol.4 No.3, 2016
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Microplastic emission characteristics of stormwater runoff in an urban area: Intra-event variability and influencing factors
Science of The Total …, 2023
[2] Polyamide powder coating of copper substrates: Impact of process parameters on the surface properties, the adhesion strength and the interface microstructure
Progress in Organic Coatings, 2023
[3] Effect of concentration GO and diamond wax and method of introducing additives on morphology and properties of epoxy powder coating
Polymer Testing, 2023
[4] Managing the powder coat waste stream: an industrial experimentation approach
Production Planning & Control, 2023
[5] Flame Retardant Coatings: Additives, Binders, and Fillers. Polymers 2022, 14, 2911
2022
[6] Influence of the Process Input Parameters on the Cross-Wire Weld Breaking Force
Tehnički glasnik, 2022
[7] Experimental Study and Performance Enhancement of Surface Coating Techniques
… and Innovation in …, 2022
[8] Production Process Development of Equipment Corrosion Coating Containing Water Hyacinth (Eichhornia Crassipes) Extract
SGU Online Thesis …, 2022
[9] Preparation of the Surface of Long-Dimensional Rods of Hydro-Cylinders for Thermal Spraying Using an Abrasive Jet
Coatings, 2022
[10] Synthesis of a curing agent containing trifunctional epoxy groups for powder coatings and its curing reaction kinetics
Journal of Coatings …, 2022
[11] Fabrication of Nano TiO2-Polymer Encapsulated Fluorescent Pigments for Weatherability Improvement of Powder Coating
Coatings, 2022
[12] Flame retardant coatings: additives, binders, and fillers
Polymers, 2022
[13] The application of liquid crystalline epoxy resin for forming hybrid powder coatings
Leszczak, B Pilch-Pitera, J Karaś… - Progress in Organic …, 2022
[14] Design and Fabrication of Automatic Seven Tank Process of Pre-Treatment Before Powder Coating
International Journal of …, 2022
[15] Modificación de línea de pintura para mejora del desempeño del recubrimiento en autopartes
… Journals Celaya 2021 (10 al 12 …, 2021
[16] Design Optimization of an Industrial Oven Heat Exchanger
2021
[17] Peramalan Penjualan Cat Bubuk Powder Coating Menggunakan Metode Moving Average dan Single Exponential Smoothing (Studi Kasus: UD. Tiga …
2021
[18] Colorants in coatings
Physical Sciences Reviews, 2021
[19] Coating Textiles: Towards Sustainable Processes
Sustainable Practices in the Textile Industry, 2021
[20] Accelerated Corrosion Tests in Quality Labels for Powder Coatings on Galvanized Steel—Comparison of Requirements and Experimental Evaluation
Materials, 2021
[21] Water-processable, biodegradable and coatable aquaplastic from engineered biofilms
2021
[22] Determination of ethyltriphenylphosphonium bromide and butyltriphenylphosphomium chloride in saturated polyester resins by LC-MS
2021
[23] Progress in development of UV curable powder coatings
2021
[24] Design and fabrication of Automated mechanism for chemical pre-treatment process in Powder coating
2021
[25] OPTIMIZATION OF POWDER COATING PROCESS PARAMETERS IN MILD STEEL (SPCC-SD) TO IMPROVE DRY FILM THICKNESS
2021
[26] Hindering the decrease in wear resistance of UV-exposed epoxy powder coatings by adding nano-SiO2 through ball milling
2021
[27] PENGARUH PROSES AGEING DAN POWDER COATING PADA ALUMINIUM PROFIL SECTION 11309
2021
[28] Analisis Ketahanan Material Epoxy Powder EF150AB pada Uji Thermal Shock untuk Komponen Charger Mobil Listrik
2021
[29] Peramalan Penjualan Cat Bubuk Powder Coating Menggunakan Metode Moving Average dan Single Exponential Smoothing (Studi Kasus: UD. Tiga Putra Sidoarjo)
2021
[30] Bismaleimide Methacrylated Polyimide-Polyester Hybrid UV-Curable Powder Coating
2020
[31] Corrosion protection in chloride environments of nanosilica containing epoxy powder coatings with defects
2020
[32] Experimental Study of Process Parameters Influencing Powder Coating of EN8 Steel Shaft used for Manual Squeezer off Tool using Taguchi Approach
2020
[33] Epoxy powder coatings hot mixed with nanoparticles to improve their abrasive wear
2020
[34] Effect of Oxide Particles Addition to Powder Coating on Corrosion Resistance of Steel Used as Marine Equipments
2020
[35] Manufacturing and Characterization of Coatings from Polyamide Powders Functionalized with Nanosilica
2020
[36] Powder and High-Solid Coatings as Anticorrosive Solutions for Marine and Offshore Applications? A Review
2020
[37] Applying microwave energy to fabricate powder coatings with strong and stable metal shine
2020
[38] Polyurethane powder coatings: A review of composition and characterization
2020
[39] Thermoset Powder Coating Wastes as Filler in LDPE–Characterization of Mechanical, Thermal and Morphological Properties
2020
[40] Silane‐functionalized Al2O3‐modified polyurethane powder coatings: Nonisothermal degradation kinetics and mechanistic insights
2020
[41] Recubrimientos orgánicos en polvo funcionalizados con nanosílice
2020
[42] Optimasi Parameter Proses Powder Coating pada Plat Electro Galvanized
2019
[43] Design and Fabrication of Automated Powder Coating System
International Journal of Engineering and Advanced Technology, 2019
[44] Line balancing synchronization in powder coating workstation: A metal industry case study
2019
[45] A REVIEW ON COATING PROCESS
2019
[46] Preparation of Nimesulide magnetite nanoparticles for targeted drug delivery
2019
[47] Studies on development of corrosion resistant coatings for preservation of marine installations with emphasis to Karachi coastal area conditons
2019
[48] 4. Coating technology principles
2019
[49] Desenvolvimento de tintas em pó base epóxi-poliéster para aplicação em móveis de ação
2018
[50] The effect of cataphoretic and powder coatings on the strength and failure modes of EN AW-5754 aluminium alloy adhesive joints
International Journal of Adhesion and Adhesives, 2018
[51] Magnesium Thiodialkanoates: Dually-Functional Additives to Organic Coatings
Industrial & Engineering Chemistry, 2018
[52] Effect of 2-aminobenzothiazole on antimicrobial activity of waterborne polyurethane dispersions (WPUDs)
Polymer Bulletin, 2018
[53] Nghiên cứu ảnh hưởng của nhiệt độ và tốc độ dòng khí đến tính chất lớp phủ nhựa PA11 bảo vệ kim loại chế tạo bằng phương pháp tầng sôi
2018
[54] Polymer Particles with a Low Glass Transition Temperature Containing Thermoset Resin Enable Powder Coatings at Room Temperature
2018
[55] Nghiên cứu ảnh hưởng của nhiệt độ và tốc độ dòng khí đến tính chất lớp phủ nhựa PA11 bảo vệ kim loại chế tạo bằng phương pháp tầng sôi.
2017
[56] Analisis Pengaruh Perlakuan Panas Terhadap Gaya Adhesi Coating Polimer Alam Getah Karet (Hevea brasiliensis) dengan Silika (SiO2) pada Baja ASTM A36
2017
[57] Simulation and Optimization of Layout of Sheet Metal Manufacturing Plant
2016
[58] Formulation and process of powder coating for solid oxide fuel cell interconnects
2016
[59] TUGAS AKHIR–MO 141326
[60] 17 Colorants in coatings
Encyclopedia of Color, Dyes
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top