|
[1]
|
Effects of fiber layout on strength and failure of 3D printed notched composites
Composite Structures,
2024
DOI:10.1016/j.compstruct.2023.117644
|
|
|
|
|
[2]
|
IX Latin American Congress on Biomedical Engineering and XXVIII Brazilian Congress on Biomedical Engineering
IFMBE Proceedings,
2024
DOI:10.1007/978-3-031-49401-7_16
|
|
|
|
|
[3]
|
Analytical and Experimental Methods in Mechanical and Civil Engineering
Structural Integrity,
2024
DOI:10.1007/978-3-031-49723-0_8
|
|
|
|
|
[4]
|
Robot-assisted laser additive manufacturing for high-strength/low-porosity continuous fiber-reinforced thermoplastic composites
Composites Science and Technology,
2024
DOI:10.1016/j.compscitech.2023.110397
|
|
|
|
|
[5]
|
On mechanical characterization and damage analysis of additively manufactured continuous fiber/poly‐lactic acid bio‐composite using in‐nozzle technique
Polymer Composites,
2024
DOI:10.1002/pc.28106
|
|
|
|
|
[6]
|
Investigation on process window of 3D printed continuous glass fiber‐reinforced thermosetting composites
Polymer Composites,
2024
DOI:10.1002/pc.27790
|
|
|
|
|
[7]
|
Comprehensive analysis of 3D printed PA6.6 and fiber‐reinforced variants: Revealing mechanical properties and adhesive wear behavior
Polymer Composites,
2024
DOI:10.1002/pc.27865
|
|
|
|
|
[8]
|
Sustainable Machining and Green Manufacturing
2024
DOI:10.1002/9781394197866.ch5
|
|
|
|
|
[9]
|
Does Thin-Walled Metal Pipe Insertion Increase the Bending Strength of 3D Printed Parts?
2024 IEEE/SICE International Symposium on System Integration (SII),
2024
DOI:10.1109/SII58957.2024.10417167
|
|
|
|
|
[10]
|
Performance enhancement of 3D‐printed carbon fiber‐reinforced nylon 6 composites
Polymer Composites,
2024
DOI:10.1002/pc.28161
|
|
|
|
|
[11]
|
A novel hybrid multi-criteria optimization of 3D printing process using grey relational analysis (GRA) coupled with principal component analysis (PCA)
Engineering Research Express,
2024
DOI:10.1088/2631-8695/ad2320
|
|
|
|
|
[12]
|
Investigation of a 3D Printing Method for Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composite
Applied Composite Materials,
2024
DOI:10.1007/s10443-024-10207-2
|
|
|
|
|
[13]
|
Kink band orientation of 3D printed continuous carbon fiber composites under compressive loading
Advanced Composite Materials,
2024
DOI:10.1080/09243046.2023.2238489
|
|
|
|
|
[14]
|
Comprehensive parametric analyses on the mechanical performance of 3D printed continuous carbon fibre reinforced plastic
Composite Structures,
2024
DOI:10.1016/j.compstruct.2023.117804
|
|
|
|
|
[15]
|
Polymer Composites in 3D/4D Printing: Materials, Advances, and Prospects
Molecules,
2024
DOI:10.3390/molecules29020319
|
|
|
|
|
[16]
|
Fabrication and analysis of micro carbon fiber filled nylon filament reinforced with Kevlar, Fiberglass, and HSHT Fiberglass using dual extrusion system
Materials Today Communications,
2023
DOI:10.1016/j.mtcomm.2023.106075
|
|
|
|
|
[17]
|
Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer
Heliyon,
2023
DOI:10.1016/j.heliyon.2023.e13581
|
|
|
|
|
[18]
|
DcAFF (Discontinuous Aligned Fibre Filament) – Mechanical properties investigation on multilayer 3D printed parts
Composites Part B: Engineering,
2023
DOI:10.1016/j.compositesb.2023.110903
|
|
|
|
|
[19]
|
3D printing in biomedicine: advancing personalized care through additive manufacturing
Exploration of Medicine,
2023
DOI:10.37349/emed.2023.00200
|
|
|
|
|
[20]
|
Functional 3D-Printed Polymeric Materials with Metallic Reinforcement for Use in Cut-Resistant Gloves
Materials,
2023
DOI:10.3390/ma17010090
|
|
|
|
|
[21]
|
The influences of international standards on structural performance and fracture behaviour of 3D printed long fiber composite structures
IOP Conference Series: Materials Science and Engineering,
2023
DOI:10.1088/1757-899X/1294/1/012048
|
|
|
|
|
[22]
|
Three-Dimensional Printing of Multifunctional Composites: Fabrication, Applications, and Biodegradability Assessment
Materials,
2023
DOI:10.3390/ma16247531
|
|
|
|
|
[23]
|
Field assisted additive manufacturing for polymers and metals: materials and methods
Virtual and Physical Prototyping,
2023
DOI:10.1080/17452759.2023.2256707
|
|
|
|
|
[24]
|
Application of interlaminar shear strength and finite element modeling for failure analysis of 3D printed continuous fiber-reinforced composites
Progress in Additive Manufacturing,
2023
DOI:10.1007/s40964-023-00417-8
|
|
|
|
|
[25]
|
3D Printing of continuous fiber composites using two-stage UV curable resin
Materials Horizons,
2023
DOI:10.1039/D3MH01304A
|
|
|
|
|
[26]
|
Finite Element Evaluation of Failure in Additively Manufactured Continuous Fiber-Reinforced Composites
Journal of Multiscale Modelling,
2023
DOI:10.1142/S1756973723410044
|
|
|
|
|
[27]
|
Methodology to design and optimise dispersed continuous carbon fibre composites parts by fused filament fabrication
Composites Part A: Applied Science and Manufacturing,
2023
DOI:10.1016/j.compositesa.2022.107315
|
|
|
|
|
[28]
|
In-situ damage self-monitoring of fiber-reinforced composite by integrating self-powered ZnO nanowires decorated carbon fabric
Composites Part B: Engineering,
2023
DOI:10.1016/j.compositesb.2022.110368
|
|
|
|
|
[29]
|
Direct-write 3D printing of UV-curable composites with continuous carbon fiber
Journal of Composite Materials,
2023
DOI:10.1177/00219983221127182
|
|
|
|
|
[30]
|
Mechanical properties of additively printed, UV cured, continuous fiber unidirectional composites for multifunctional applications
Journal of Composite Materials,
2023
DOI:10.1177/00219983221146264
|
|
|
|
|
[31]
|
Exploring optimal adaptive process parameters for curved infill paths of additive manufactured carbon fibre reinforced polymers
Composites Communications,
2023
DOI:10.1016/j.coco.2023.101549
|
|
|
|
|
[32]
|
Finite Element Evaluation of Failure in Additively Manufactured Continuous Fiber-Reinforced Composites
Journal of Multiscale Modelling,
2023
DOI:10.1142/S1756973723410044
|
|
|
|
|
[33]
|
Proceedings of the International Conference on Mechanical Engineering (ICOME 2022)
Atlantis Highlights in Engineering,
2023
DOI:10.2991/978-94-6463-152-4_4
|
|
|
|
|
[34]
|
3D-Printed Sandwiched Acrylonitrile Butadiene Styrene/Carbon Fiber Composites: Investigating Mechanical, Morphological, and Fractural Properties
Journal of Materials Engineering and Performance,
2023
DOI:10.1007/s11665-023-08292-8
|
|
|
|
|
[35]
|
Z-direction performance and failure behavior of 3D printed continuous fiber reinforced composites with sinusoidal structure
Composites Science and Technology,
2023
DOI:10.1016/j.compscitech.2023.110069
|
|
|
|
|
[36]
|
Mechanical and energy absorption behaviors of 3D printed continuous carbon/Kevlar hybrid thread reinforced PLA composites
Composite Structures,
2023
DOI:10.1016/j.compstruct.2022.116386
|
|
|
|
|
[37]
|
Stress-adapted fiber orientation along the principal stress directions for continuous fiber-reinforced material extrusion
Progress in Additive Manufacturing,
2023
DOI:10.1007/s40964-022-00347-x
|
|
|
|
|
[38]
|
Challenges in Tensile Testing of Thermoplastic Composites Reinforced with Chopped Carbon Fibre Produced by Fused Filament Fabrication Method
Manufacturing Technology,
2023
DOI:10.21062/mft.2023.010
|
|
|
|
|
[39]
|
Advances in hybrid fibers reinforced polymer-based composites prepared by FDM: A review on mechanical properties and prospects
Composites Communications,
2023
DOI:10.1016/j.coco.2023.101592
|
|
|
|
|
[40]
|
Fabrication and analysis of micro carbon fiber filled nylon filament reinforced with Kevlar, Fiberglass, and HSHT Fiberglass using dual extrusion system
Materials Today Communications,
2023
DOI:10.1016/j.mtcomm.2023.106075
|
|
|
|
|
[41]
|
3D-printing of Continuous Fiber: A review of processes, materials and properties
Polymer-Plastics Technology and Materials,
2023
DOI:10.1080/25740881.2023.2222793
|
|
|
|
|
[42]
|
Carbon-Fiber- and Nanodiamond-Reinforced PLA Hierarchical 3D-Printed Core Sandwich Structures
Journal of Composites Science,
2023
DOI:10.3390/jcs7070285
|
|
|
|
|
[43]
|
Thermomechanical performance of continuous carbon fibre composite materials produced by a modified 3D printer
Heliyon,
2023
DOI:10.1016/j.heliyon.2023.e13581
|
|
|
|
|
[44]
|
Simultaneous Optimization of Carbon Fiber Allocation and Orientation by IFM-GA
Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers,
2023
DOI:10.1016/j.cjmeam.2023.100078
|
|
|
|
|
[45]
|
Submodels of the model of dynamic deformation of a transversally isotropic thermoelastic medium for solving the problems of horizontal crack formation at 3D printing
Acta Mechanica,
2023
DOI:10.1007/s00707-023-03587-2
|
|
|
|
|
[46]
|
Study of the Mechanical Properties of 3D-printed Onyx Parts: Investigation on Printing Parameters and Effect of Humidity
Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers,
2023
DOI:10.1016/j.cjmeam.2023.100075
|
|
|
|
|
[47]
|
Mode I, mode II and mixed mode I-II delamination of carbon fibre-reinforced polyamide composites 3D-printed by material extrusion
Composites Part A: Applied Science and Manufacturing,
2023
DOI:10.1016/j.compositesa.2023.107655
|
|
|
|
|
[48]
|
Optimization of nozzle for pre-impregnated continuous fiber reinforced 3D printing
Journal of Composite Materials,
2023
DOI:10.1177/00219983231202298
|
|
|
|
|
[49]
|
Impact Strength for 3D-Printed PA6 Polymer Composites under Temperature Changes
Journal of Manufacturing and Materials Processing,
2023
DOI:10.3390/jmmp7050178
|
|
|
|
|
[50]
|
Evaluation of Tensile Strength and Repeatability of 3D Printed Carbon Fiber Materials and Processes
3D Printing and Additive Manufacturing,
2023
DOI:10.1089/3dp.2022.0262
|
|
|
|
|
[51]
|
3D Printing Technology for Short-continuous Carbon Fiber Synchronous Reinforced Thermoplastic Composites: A Comparison between Towpreg Extrusion and In Situ Impregnation Processes
Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers,
2023
DOI:10.1016/j.cjmeam.2023.100092
|
|
|
|
|
[52]
|
Compressive properties and failure mechanisms of 3D-printed continuous carbon fiber-reinforced auxetic structures
Composites Communications,
2023
DOI:10.1016/j.coco.2023.101744
|
|
|
|
|
[53]
|
Performance Study of 3D Printed Continuous Fiber-Reinforced Polymer Composites Using Taguchi Method
Journal of Materials Engineering and Performance,
2023
DOI:10.1007/s11665-022-07715-2
|
|
|
|
|
[54]
|
Mode I, mode II and mixed mode I-II delamination of carbon fibre-reinforced polyamide composites 3D-printed by material extrusion
Composites Part A: Applied Science and Manufacturing,
2023
DOI:10.1016/j.compositesa.2023.107655
|
|
|
|
|
[55]
|
Challenges in Tensile Testing of Thermoplastic Composites Reinforced with Chopped Carbon Fibre Produced by Fused Filament Fabrication Method
Manufacturing Technology,
2023
DOI:10.21062/mft.2023.010
|
|
|
|
|
[56]
|
Carbon Fiber 3D Printing: Technologies and Performance—A Brief Review
Materials,
2023
DOI:10.3390/ma16237311
|
|
|
|
|
[57]
|
Recent Advancements in Mechanical Engineering
Lecture Notes in Mechanical Engineering,
2023
DOI:10.1007/978-981-19-3266-3_37
|
|
|
|
|
[58]
|
A Voronoi diagram approach for detecting defects in 3D printed fiber-reinforced polymers from microscope images
Computational Visual Media,
2023
DOI:10.1007/s41095-021-0265-1
|
|
|
|
|
[59]
|
In-situ damage self-monitoring of fiber-reinforced composite by integrating self-powered ZnO nanowires decorated carbon fabric
Composites Part B: Engineering,
2023
DOI:10.1016/j.compositesb.2022.110368
|
|
|
|
|
[60]
|
Calculating printing speed in order to correctly print PLA/continuous glass fiber composites via fused filament fabrication 3D printer
Journal of Thermoplastic Composite Materials,
2023
DOI:10.1177/0892705721997534
|
|
|
|
|
[61]
|
A review on additive manufacturing of carbon fiber‐reinforced polymers: Current methods, materials, mechanical properties, applications and challenges
Journal of Applied Polymer Science,
2023
DOI:10.1002/app.53476
|
|
|
|
|
[62]
|
Numerical Modeling Based on Finite Element Analysis of 3D-Printed Wood-Polylactic Acid Composites: A Comparison with Experimental Data
Forests,
2023
DOI:10.3390/f14010095
|
|
|
|
|
[63]
|
Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing
2023
DOI:10.1016/B978-0-323-91834-3.00015-6
|
|
|
|
|
[64]
|
Low‐temperature
3D
printing and curing process of continuous fiber‐reinforced thermosetting polymer composites
Polymer Composites,
2023
DOI:10.1002/pc.27247
|
|
|
|
|
[65]
|
Mechanical and energy absorption behaviors of 3D printed continuous carbon/Kevlar hybrid thread reinforced PLA composites
Composite Structures,
2023
DOI:10.1016/j.compstruct.2022.116386
|
|
|
|
|
[66]
|
Fused Deposition Modeling of Composite Materials
2023
DOI:10.1016/B978-0-323-98823-0.00003-2
|
|
|
|
|
[67]
|
Fused Deposition Modeling of Composite Materials
2023
DOI:10.1016/B978-0-323-98823-0.00009-3
|
|
|
|
|
[68]
|
Nonlinear behavior mechanism of change in electrical resistance on 3D printed carbon fiber / PA6 composites during cyclic tests
Advanced Composite Materials,
2023
DOI:10.1080/09243046.2022.2055514
|
|
|
|
|
[69]
|
Fused Deposition Modeling of Composite Materials
2023
DOI:10.1016/B978-0-323-98823-0.00002-0
|
|
|
|
|
[70]
|
Impact energy absorption and fracture mechanism of FFF made fiberglass reinforced polymer composites
Rapid Prototyping Journal,
2023
DOI:10.1108/RPJ-04-2022-0135
|
|
|
|
|
[71]
|
Manufacturing Technologies of Polymer Composites—A Review
Polymers,
2023
DOI:10.3390/polym15030712
|
|
|
|
|
[72]
|
Effect of Manufacture-Induced Interfaces on the Tensile Properties of 3D Printed Polyamide and Short Carbon Fibre-Reinforced Polyamide Composites
Polymers,
2023
DOI:10.3390/polym15030773
|
|
|
|
|
[73]
|
Characterization of Minerals, Metals, and Materials 2023
The Minerals, Metals & Materials Series,
2023
DOI:10.1007/978-3-031-22576-5_9
|
|
|
|
|
[74]
|
Linear translaminar fracture characterization of additive manufactured continuous carbon fiber reinforced thermoplastic
Journal of Thermoplastic Composite Materials,
2023
DOI:10.1177/08927057211021462
|
|
|
|
|
[75]
|
Additive manufacturing of PEEK-based continuous fiber reinforced thermoplastic composites with high mechanical properties
Composites Part A: Applied Science and Manufacturing,
2023
DOI:10.1016/j.compositesa.2023.107434
|
|
|
|
|
[76]
|
Application of interlaminar shear strength and finite element modeling for failure analysis of 3D printed continuous fiber-reinforced composites
Progress in Additive Manufacturing,
2023
DOI:10.1007/s40964-023-00417-8
|
|
|
|
|
[77]
|
Development, Properties, and Industrial Applications of 3D Printed Polymer Composites
Advances in Chemical and Materials Engineering,
2023
DOI:10.4018/978-1-6684-6009-2.ch001
|
|
|
|
|
[78]
|
Development, Properties, and Industrial Applications of 3D Printed Polymer Composites
Advances in Chemical and Materials Engineering,
2023
DOI:10.4018/978-1-6684-6009-2.ch004
|
|
|
|
|
[79]
|
Experimental and Numerical Investigation of the Mechanical Properties of 3D-Printed Hybrid and Non-Hybrid Composites
Polymers,
2023
DOI:10.3390/polym15051164
|
|
|
|
|
[80]
|
Assessing the effect of FDM processing parameters on mechanical properties of PLA parts using Taguchi method
Journal of Thermoplastic Composite Materials,
2023
DOI:10.1177/08927057211053036
|
|
|
|
|
[81]
|
Polyurethane with nano‐
SiO
2
based surface sizing method for
3D
printed carbon fiber reinforced nylon 6 composites
Polymer Composites,
2023
DOI:10.1002/pc.27187
|
|
|
|
|
[82]
|
Investigations into flexural behavior of additively manufactured short and continuous fiber CFRP composites
Journal of the Brazilian Society of Mechanical Sciences and Engineering,
2023
DOI:10.1007/s40430-023-04085-1
|
|
|
|
|
[83]
|
Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites
Construction and Building Materials,
2022
DOI:10.1016/j.conbuildmat.2022.127842
|
|
|
|
|
[84]
|
Process Evaluation, Tensile Properties and Fatigue Resistance of Chopped and Continuous Fiber Reinforced Thermoplastic Composites by 3D Printing
Journal of Renewable Materials,
2022
DOI:10.32604/jrm.2022.016374
|
|
|
|
|
[85]
|
Additive manufacturing of high density carbon fibre reinforced polymer composites
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103044
|
|
|
|
|
[86]
|
Continuous fibre reinforced Vat photopolymerisation (CONFIB-VAT)
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103233
|
|
|
|
|
[87]
|
Additive manufacturing of high density carbon fibre reinforced polymer composites
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103044
|
|
|
|
|
[88]
|
Novel designable strategy and multi-scale analysis of 3D printed thermoplastic fabric composites
Composites Science and Technology,
2022
DOI:10.1016/j.compscitech.2022.109388
|
|
|
|
|
[89]
|
Mechanical characterization of 3D printed continuous carbon fiber reinforced thermoplastic composites
Composites Science and Technology,
2022
DOI:10.1016/j.compscitech.2022.109618
|
|
|
|
|
[90]
|
Continuous fibre composite 3D printing with pultruded carbon/PA6 commingled fibres: Processing and mechanical properties
Composites Science and Technology,
2022
DOI:10.1016/j.compscitech.2022.109341
|
|
|
|
|
[91]
|
Finite element modelling of 3D printed continuous carbon fiber composites: Embedded elements technique and experimental validation
Composite Structures,
2022
DOI:10.1016/j.compstruct.2022.115631
|
|
|
|
|
[92]
|
Investigation of influence of printing parameters on the quality of 3D printed composite structures
Composite Structures,
2022
DOI:10.1016/j.compstruct.2021.115061
|
|
|
|
|
[93]
|
Micromechanical models for predicting the mechanical properties of 3D-printed wood/PLA composite materials: A comparison with experimental data
Mechanics of Advanced Materials and Structures,
2022
DOI:10.1080/15376494.2021.1983901
|
|
|
|
|
[94]
|
Fabrication of continuous carbon fibre-reinforced polyetherimide through fused filament fabrication
Progress in Additive Manufacturing,
2022
DOI:10.1007/s40964-022-00284-9
|
|
|
|
|
[95]
|
Manufacturing of Bromelain based PVA support structure for 3D printing
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2022.04.319
|
|
|
|
|
[96]
|
Open Hole Tension of 3D Printed Aligned Discontinuous Composites
Materials,
2022
DOI:10.3390/ma15238698
|
|
|
|
|
[97]
|
Mechanical properties of additively printed, UV cured, continuous fiber unidirectional composites for multifunctional applications
Journal of Composite Materials,
2022
DOI:10.1177/00219983221146264
|
|
|
|
|
[98]
|
Performance Study of 3D Printed Continuous Fiber-Reinforced Polymer Composites Using Taguchi Method
Journal of Materials Engineering and Performance,
2022
DOI:10.1007/s11665-022-07715-2
|
|
|
|
|
[99]
|
Mechanical properties of additively printed, UV cured, continuous fiber unidirectional composites for multifunctional applications
Journal of Composite Materials,
2022
DOI:10.1177/00219983221146264
|
|
|
|
|
[100]
|
Performance Study of 3D Printed Continuous Fiber-Reinforced Polymer Composites Using Taguchi Method
Journal of Materials Engineering and Performance,
2022
DOI:10.1007/s11665-022-07715-2
|
|
|
|
|
[101]
|
Ultrasonic fatigue analysis of 3D-printed carbon fiber reinforced plastic
Heliyon,
2022
DOI:10.1016/j.heliyon.2022.e11671
|
|
|
|
|
[102]
|
Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces
The International Journal of Advanced Manufacturing Technology,
2022
DOI:10.1007/s00170-022-10398-7
|
|
|
|
|
[103]
|
Investigation of influence of printing parameters on the quality of 3D printed composite structures
Composite Structures,
2022
DOI:10.1016/j.compstruct.2021.115061
|
|
|
|
|
[104]
|
Identification of Representative Equivalent Volumes on the Microstructure of 3D-Printed Fiber-Reinforced Thermoplastics Based on Statistical Characterization
Polymers,
2022
DOI:10.3390/polym14050972
|
|
|
|
|
[105]
|
Continuous fibre reinforced Vat photopolymerisation (CONFIB-VAT)
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103233
|
|
|
|
|
[106]
|
Experimental study on interface failure behavior of 3D printed continuous fiber reinforced composites
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103077
|
|
|
|
|
[107]
|
Empirical Study for 3D-Printed Robot Design: Dimensional Accuracy of a Hole and Proposal of a New Shaft-Fastening Method
2022 IEEE/SICE International Symposium on System Integration (SII),
2022
DOI:10.1109/SII52469.2022.9708832
|
|
|
|
|
[108]
|
Polyurethane with nano‐
SiO
2
based surface sizing method for
3D
printed carbon fiber reinforced nylon 6 composites
Polymer Composites,
2022
DOI:10.1002/pc.27187
|
|
|
|
|
[109]
|
Influence of void contour on the elastic behavior of parts produced by material extrusion
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103138
|
|
|
|
|
[110]
|
Finite element modelling of 3D printed continuous carbon fiber composites: Embedded elements technique and experimental validation
Composite Structures,
2022
DOI:10.1016/j.compstruct.2022.115631
|
|
|
|
|
[111]
|
3D printing of continuous carbon fiber reinforced polyphenylene sulfide: Exploring printability and importance of fiber volume fraction
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.102763
|
|
|
|
|
[112]
|
Properties investigation of 3D printed continuous pineapple leaf fiber-reinforced PLA composite
Journal of Thermoplastic Composite Materials,
2022
DOI:10.1177/0892705720945371
|
|
|
|
|
[113]
|
Digital Manufacture of a Continuous Fiber Reinforced Thermoplastic Matrix Truss Core Structural Panel Using Off-the-Tool Consolidation
Journal of Composites Science,
2022
DOI:10.3390/jcs6110343
|
|
|
|
|
[114]
|
3D-Printed Fiber-Reinforced Polymer Composites by Fused Deposition Modelling (FDM): Fiber Length and Fiber Implementation Techniques
Polymers,
2022
DOI:10.3390/polym14214659
|
|
|
|
|
[115]
|
Nanomaterials for Energy Conversion, Biomedical and Environmental Applications
Materials Horizons: From Nature to Nanomaterials,
2022
DOI:10.1007/978-981-19-2639-6_8
|
|
|
|
|
[116]
|
Stress-adapted fiber orientation along the principal stress directions for continuous fiber-reinforced material extrusion
Progress in Additive Manufacturing,
2022
DOI:10.1007/s40964-022-00347-x
|
|
|
|
|
[117]
|
A new resonance-based design approach to reduce motor torque requirements in automated machinery
The International Journal of Advanced Manufacturing Technology,
2022
DOI:10.1007/s00170-022-09879-6
|
|
|
|
|
[118]
|
Lightweight design of automotive components using generative design with fiber-reinforced additive manufacturing
Procedia CIRP,
2022
DOI:10.1016/j.procir.2022.05.224
|
|
|
|
|
[119]
|
Experimental investigations on thermal, flame retardant, and impact properties of additively manufactured continuous
FRPC
Polymer Composites,
2022
DOI:10.1002/pc.26588
|
|
|
|
|
[120]
|
The influence of the humidity on the mechanical properties of 3D printed continuous flax fibre reinforced poly(lactic acid) composites
Composites Part A: Applied Science and Manufacturing,
2022
DOI:10.1016/j.compositesa.2022.106805
|
|
|
|
|
[121]
|
Additive manufacturing with fibre-reinforcement – design guidelines and investigation into the influence of infill patterns
Rapid Prototyping Journal,
2022
DOI:10.1108/RPJ-09-2021-0223
|
|
|
|
|
[122]
|
In-nozzle impregnation of continuous textile flax fiber/polyamide 6 composite during FFF process
Composites Part A: Applied Science and Manufacturing,
2022
DOI:10.1016/j.compositesa.2021.106725
|
|
|
|
|
[123]
|
Bending properties and failure behavior of
3D
printed fiber reinforced resin T‐beam
Polymer Composites,
2022
DOI:10.1002/pc.26712
|
|
|
|
|
[124]
|
Research on the Simulation Model of Continuous Fiber-Reinforced Composites Printing Track
Polymers,
2022
DOI:10.3390/polym14132730
|
|
|
|
|
[125]
|
Nonlinear behavior mechanism of change in electrical resistance on 3D printed carbon fiber / PA6 composites during cyclic tests
Advanced Composite Materials,
2022
DOI:10.1080/09243046.2022.2055514
|
|
|
|
|
[126]
|
Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments
Polymers,
2022
DOI:10.3390/polym14071351
|
|
|
|
|
[127]
|
Effect of build-up orientations and process parameters on the tensile strength of 3D printed short carbon fiber/PA-6 composites
Advanced Composite Materials,
2022
DOI:10.1080/09243046.2021.1930497
|
|
|
|
|
[128]
|
Design and analysis of fiber placement for composite conical shell
Journal of Mechanical Science and Technology,
2022
DOI:10.1007/s12206-022-0230-7
|
|
|
|
|
[129]
|
Novel designable strategy and multi-scale analysis of 3D printed thermoplastic fabric composites
Composites Science and Technology,
2022
DOI:10.1016/j.compscitech.2022.109388
|
|
|
|
|
[130]
|
Characterization of continuous carbon fibre reinforced 3D printed polymer composites with varying fibre volume fractions
Composite Structures,
2022
DOI:10.1016/j.compstruct.2021.115033
|
|
|
|
|
[131]
|
3D-printed thermoplastic composite fasteners for single lap joint reinforcement
Composite Structures,
2022
DOI:10.1016/j.compstruct.2021.115085
|
|
|
|
|
[132]
|
Process-structure-property of additively manufactured continuous carbon fiber reinforced thermoplastic: an investigation of mode I interlaminar fracture toughness
Mechanics of Advanced Materials and Structures,
2022
DOI:10.1080/15376494.2020.1821266
|
|
|
|
|
[133]
|
Evaluation of the mechanical properties and performance cost of additively manufactured continuous glass and carbon fiber composites
The International Journal of Advanced Manufacturing Technology,
2022
DOI:10.1007/s00170-022-08879-w
|
|
|
|
|
[134]
|
Continuous fibre composite 3D printing with pultruded carbon/PA6 commingled fibres: Processing and mechanical properties
Composites Science and Technology,
2022
DOI:10.1016/j.compscitech.2022.109341
|
|
|
|
|
[135]
|
3D printing and epoxy-infusion treatment of curved continuous carbon fibre reinforced dual-polymer composites
Composites Part B: Engineering,
2022
DOI:10.1016/j.compositesb.2022.109687
|
|
|
|
|
[136]
|
DLP-Based 3D Printing for Automated Precision Manufacturing
Mobile Information Systems,
2022
DOI:10.1155/2022/2272699
|
|
|
|
|
[137]
|
Application of digital image correlation in behavior modelling of AM CFRTP composites
Engineering Failure Analysis,
2022
DOI:10.1016/j.engfailanal.2022.106133
|
|
|
|
|
[138]
|
Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites
Construction and Building Materials,
2022
DOI:10.1016/j.conbuildmat.2022.127842
|
|
|
|
|
[139]
|
3D printing of continuous fiber reinforced composites: A review of the processing, pre- and post-processing effects on mechanical properties
Polymers and Polymer Composites,
2022
DOI:10.1177/09673911221098734
|
|
|
|
|
[140]
|
Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication
Polymers,
2022
DOI:10.3390/polym14020298
|
|
|
|
|
[141]
|
Effect of fibre arrangements on tensile properties of 3D printed continuous fibre-reinforced thermoplastic composites
Plastics, Rubber and Composites,
2022
DOI:10.1080/14658011.2021.1939588
|
|
|
|
|
[142]
|
Experimental Characterization and Modeling of 3D Printed Continuous Carbon Fibers Composites with Different Fiber Orientation Produced by FFF Process
Polymers,
2022
DOI:10.3390/polym14030426
|
|
|
|
|
[143]
|
Experimental Characterization and Analysis of the In-Plane Elastic Properties and Interlaminar Fracture Toughness of a 3D-Printed Continuous Carbon Fiber-Reinforced Composite
Polymers,
2022
DOI:10.3390/polym14030506
|
|
|
|
|
[144]
|
Mechanical Characterization of AISI 316L Samples Printed Using Material Extrusion
Applied Sciences,
2022
DOI:10.3390/app12031433
|
|
|
|
|
[145]
|
Effect of carbon fibre on reinforcement of thermoplastics using FDM and RSM
Journal of Thermoplastic Composite Materials,
2022
DOI:10.1177/0892705719886891
|
|
|
|
|
[146]
|
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Advanced Materials,
2022
DOI:10.1002/adma.202102877
|
|
|
|
|
[147]
|
A DMA-Based Approach to Quality Evaluation of Digitally Manufactured Continuous Fiber-Reinforced Composites from Thermoplastic Commingled Tow
Journal of Composites Science,
2022
DOI:10.3390/jcs6020061
|
|
|
|
|
[148]
|
3d Printing: Basic principles and applications
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2021.06.272
|
|
|
|
|
[149]
|
Tensile Properties of Additively Manufactured Thermoplastic Composites Reinforced with Chopped Carbon Fibre
Materials,
2022
DOI:10.3390/ma15124224
|
|
|
|
|
[150]
|
Compression and Bending Properties of Short Carbon Fiber Reinforced Polymers Sandwich Structures Produced via Fused Filament Fabrication Process
Polymers,
2022
DOI:10.3390/polym14142923
|
|
|
|
|
[151]
|
Manufacturing of Bromelain based PVA support structure for 3D printing
Materials Today: Proceedings,
2022
DOI:10.1016/j.matpr.2022.04.319
|
|
|
|
|
[152]
|
Digital Manufacturing
2022
DOI:10.1016/B978-0-323-95062-6.00008-5
|
|
|
|
|
[153]
|
3D printing of composite materials using ultralow-melt-viscosity polymer and continuous carbon fiber
Composites Part C: Open Access,
2022
DOI:10.1016/j.jcomc.2022.100250
|
|
|
|
|
[154]
|
Impact energy absorption and fracture mechanism of FFF made fiberglass reinforced polymer composites
Rapid Prototyping Journal,
2022
DOI:10.1108/RPJ-04-2022-0135
|
|
|
|
|
[155]
|
Additive Manufacturing of Biomaterials—Design Principles and Their Implementation
Materials,
2022
DOI:10.3390/ma15155457
|
|
|
|
|
[156]
|
Mechanical characterization of 3D printed continuous carbon fiber reinforced thermoplastic composites
Composites Science and Technology,
2022
DOI:10.1016/j.compscitech.2022.109618
|
|
|
|
|
[157]
|
A review on carbon fiber-reinforced hierarchical composites: mechanical performance, manufacturing process, structural applications and allied challenges
Carbon Letters,
2022
DOI:10.1007/s42823-022-00358-2
|
|
|
|
|
[158]
|
Effect of Printing Direction on the Elastic Properties of 3D-Printed Nylon Materials
ICEM 2022,
2022
DOI:10.3390/psf2022004021
|
|
|
|
|
[159]
|
Experimental study on interface failure behavior of 3D printed continuous fiber reinforced composites
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103077
|
|
|
|
|
[160]
|
Pin-bearing mechanical behaviour of continuous reinforced Kevlar fibre composite fabricated via fused filament fabrication
Progress in Additive Manufacturing,
2022
DOI:10.1007/s40964-022-00261-2
|
|
|
|
|
[161]
|
Comparison of Models to Predict Mechanical Properties of FR-AM Composites and a Fractographical Study
Polymers,
2022
DOI:10.3390/polym14173546
|
|
|
|
|
[162]
|
Additive manufacturing of high density carbon fibre reinforced polymer composites
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103044
|
|
|
|
|
[163]
|
Tensile and thermal properties of low-melt poly aryl ether ketone reinforced with continuous carbon fiber manufactured by robotic 3D printing
The International Journal of Advanced Manufacturing Technology,
2022
DOI:10.1007/s00170-022-09983-7
|
|
|
|
|
[164]
|
Direct-write 3D printing of UV-curable composites with continuous carbon fiber
Journal of Composite Materials,
2022
DOI:10.1177/00219983221127182
|
|
|
|
|
[165]
|
Continuously Reinforced Polymeric Composite for Additive Manufacturing—Development and Efficiency Analysis
Polymers,
2022
DOI:10.3390/polym14173471
|
|
|
|
|
[166]
|
Continuous Fiber-Reinforced Material Extrusion with Hybrid Composites of Carbon and Aramid Fibers
Applied Sciences,
2022
DOI:10.3390/app12178830
|
|
|
|
|
[167]
|
3D-printed thermoplastic composite fasteners for single lap joint reinforcement
Composite Structures,
2022
DOI:10.1016/j.compstruct.2021.115085
|
|
|
|
|
[168]
|
Characterization of continuous carbon fibre reinforced 3D printed polymer composites with varying fibre volume fractions
Composite Structures,
2022
DOI:10.1016/j.compstruct.2021.115033
|
|
|
|
|
[169]
|
3D-printed thermoplastic composite fasteners for single lap joint reinforcement
Composite Structures,
2022
DOI:10.1016/j.compstruct.2021.115085
|
|
|
|
|
[170]
|
Additive manufacturing of high density carbon fibre reinforced polymer composites
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103044
|
|
|
|
|
[171]
|
Ultrasonic fatigue analysis of 3D-printed carbon fiber reinforced plastic
Heliyon,
2022
DOI:10.1016/j.heliyon.2022.e11671
|
|
|
|
|
[172]
|
Continuous fibre reinforced Vat photopolymerisation (CONFIB-VAT)
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103233
|
|
|
|
|
[173]
|
Influence of void contour on the elastic behavior of parts produced by material extrusion
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103138
|
|
|
|
|
[174]
|
3D printing of continuous carbon fiber reinforced polyphenylene sulfide: Exploring printability and importance of fiber volume fraction
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.102763
|
|
|
|
|
[175]
|
Contributions of interfaces on the mechanical behavior of 3D printed continuous fiber reinforced composites
Construction and Building Materials,
2022
DOI:10.1016/j.conbuildmat.2022.127842
|
|
|
|
|
[176]
|
Lightweight design of automotive components using generative design with fiber-reinforced additive manufacturing
Procedia CIRP,
2022
DOI:10.1016/j.procir.2022.05.224
|
|
|
|
|
[177]
|
Additive manufacturing of high density carbon fibre reinforced polymer composites
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103044
|
|
|
|
|
[178]
|
Experimental study on interface failure behavior of 3D printed continuous fiber reinforced composites
Additive Manufacturing,
2022
DOI:10.1016/j.addma.2022.103077
|
|
|
|
|
[179]
|
Ultrasonic fatigue analysis of 3D-printed carbon fiber reinforced plastic
Heliyon,
2022
DOI:10.1016/j.heliyon.2022.e11671
|
|
|
|
|
[180]
|
In-nozzle impregnation of continuous textile flax fiber/polyamide 6 composite during FFF process
Composites Part A: Applied Science and Manufacturing,
2022
DOI:10.1016/j.compositesa.2021.106725
|
|
|
|
|
[181]
|
3D printing and epoxy-infusion treatment of curved continuous carbon fibre reinforced dual-polymer composites
Composites Part B: Engineering,
2022
DOI:10.1016/j.compositesb.2022.109687
|
|
|
|
|
[182]
|
The influence of the humidity on the mechanical properties of 3D printed continuous flax fibre reinforced poly(lactic acid) composites
Composites Part A: Applied Science and Manufacturing,
2022
DOI:10.1016/j.compositesa.2022.106805
|
|
|
|
|
[183]
|
Ultrasonic fatigue analysis of 3D-printed carbon fiber reinforced plastic
Heliyon,
2022
DOI:10.1016/j.heliyon.2022.e11671
|
|
|
|
|
[184]
|
Interfacial adhesion quality in 3D printed continuous CF/PA6 composites at filament/matrix and interlaminar scales
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108891
|
|
|
|
|
[185]
|
Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108652
|
|
|
|
|
[186]
|
Mechanical properties for long fibre reinforced fused deposition manufactured composites
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108657
|
|
|
|
|
[187]
|
Thermotropic liquid crystalline polymer reinforced polyamide composite for fused filament fabrication
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.101931
|
|
|
|
|
[188]
|
3D printing of continuous fiber-reinforced thermoset composites
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.101921
|
|
|
|
|
[189]
|
VOLCO-X: Numerical simulation of material distribution and voids in extrusion additive manufacturing
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.101900
|
|
|
|
|
[190]
|
Batch production and fused filament fabrication of highly aligned discontinuous fibre thermoplastic filaments
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.102359
|
|
|
|
|
[191]
|
The mechanical performance of the 3D printed composites produced with continuous carbon fiber reinforced filaments obtained via melt impregnation
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.102112
|
|
|
|
|
[192]
|
Direct writing of continuous carbon fibers/epoxy thermoset composites with high-strength and low energy-consumption
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.102348
|
|
|
|
|
[193]
|
Intrinsic Field-Induced Nanoparticle Assembly in Three-Dimensional (3D) Printing Polymeric Composites
ACS Applied Materials & Interfaces,
2021
DOI:10.1021/acsami.1c12763
|
|
|
|
|
[194]
|
Experimental investigation and statistical analysis of additively manufactured onyx‐carbon fiber reinforced composites
Journal of Applied Polymer Science,
2021
DOI:10.1002/app.50338
|
|
|
|
|
[195]
|
An Experimental Study on Mechanical, Thermal and Flame-Retardant Properties of 3D-Printed Glass-Fiber-Reinforced Polymer Composites
Journal of Materials Engineering and Performance,
2021
DOI:10.1007/s11665-021-05731-2
|
|
|
|
|
[196]
|
Experimental Analysis of Impact Resistance of 3D Polycarbonate and Nylon + Carbon Fiber Specimens
Journal of Materials Engineering and Performance,
2021
DOI:10.1007/s11665-020-05422-4
|
|
|
|
|
[197]
|
Influence of Process Parameters on the Properties of Additively Manufactured Fiber-Reinforced Polymer Composite Materials: A Review
Journal of Materials Engineering and Performance,
2021
DOI:10.1007/s11665-021-05832-y
|
|
|
|
|
[198]
|
An Experimental Study on Mechanical, Thermal and Flame-Retardant Properties of 3D-Printed Glass-Fiber-Reinforced Polymer Composites
Journal of Materials Engineering and Performance,
2021
DOI:10.1007/s11665-021-05731-2
|
|
|
|
|
[199]
|
Experimental Analysis of Impact Resistance of 3D Polycarbonate and Nylon + Carbon Fiber Specimens
Journal of Materials Engineering and Performance,
2021
DOI:10.1007/s11665-020-05422-4
|
|
|
|
|
[200]
|
Predication of the in-plane mechanical properties of continuous carbon fibre reinforced 3D printed polymer composites using classical laminated-plate theory
Composite Structures,
2021
DOI:10.1016/j.compstruct.2020.113226
|
|
|
|
|
[201]
|
Three-dimensional Similarity Law for Elastic Wave Propagation in CFRP with Concentrically Curved Fibers
Journal of the Japan Society for Composite Materials,
2021
DOI:10.6089/jscm.47.20
|
|
|
|
|
[202]
|
Direct writing of continuous carbon fibers/epoxy thermoset composites with high-strength and low energy-consumption
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.102348
|
|
|
|
|
[203]
|
Investigating the fatigue and mechanical behaviour of 3D printed woven and nonwoven continuous carbon fibre reinforced polymer (CFRP) composites
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108704
|
|
|
|
|
[204]
|
Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective
RSC Advances,
2021
DOI:10.1039/D1RA04060J
|
|
|
|
|
[205]
|
Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review
Applied Composite Materials,
2021
DOI:10.1007/s10443-021-09933-8
|
|
|
|
|
[206]
|
Encyclopedia of Materials: Composites
2021
DOI:10.1016/B978-0-12-819724-0.00025-2
|
|
|
|
|
[207]
|
Carbon-fiber reinforced polymer composites: A comparison of manufacturing methods on mechanical properties
International Journal of Lightweight Materials and Manufacture,
2021
DOI:10.1016/j.ijlmm.2021.04.001
|
|
|
|
|
[208]
|
Experimental Investigation of Additive Manufacturing of Continuous Carbon Fiber Composites with Multifunctional Electro-Tensile Properties
Materials,
2021
DOI:10.3390/ma14216574
|
|
|
|
|
[209]
|
Impregnation modeling and preparation optimization of continuous glass fiber reinforced polylactic acid filament for
3D
printing
Polymer Composites,
2021
DOI:10.1002/pc.26255
|
|
|
|
|
[210]
|
The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing
Polymer Testing,
2021
DOI:10.1016/j.polymertesting.2020.106925
|
|
|
|
|
[211]
|
Geometrical Scaling Effects in the Mechanical Properties of 3D-Printed Body-Centered Cubic (BCC) Lattice Structures
Polymers,
2021
DOI:10.3390/polym13223967
|
|
|
|
|
[212]
|
Three-dimensional similarity law for elastic wave propagation in CFRP with concentrically curved fibers
Advanced Composite Materials,
2021
DOI:10.1080/09243046.2021.1882163
|
|
|
|
|
[213]
|
Annealing of chopped and continuous fibre reinforced polyamide 6 produced by fused filament fabrication
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.109119
|
|
|
|
|
[214]
|
Intrinsic Field-Induced Nanoparticle Assembly in Three-Dimensional (3D) Printing Polymeric Composites
ACS Applied Materials & Interfaces,
2021
DOI:10.1021/acsami.1c12763
|
|
|
|
|
[215]
|
3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications
Small,
2021
DOI:10.1002/smll.202100817
|
|
|
|
|
[216]
|
A Comparative Study of the Mechanical Properties of FDM 3D Prints Made of PLA and Carbon Fiber-Reinforced PLA for Thin-Walled Applications
Materials,
2021
DOI:10.3390/ma14227062
|
|
|
|
|
[217]
|
Assessing the effect of FDM processing parameters on mechanical properties of PLA parts using Taguchi method
Journal of Thermoplastic Composite Materials,
2021
DOI:10.1177/08927057211053036
|
|
|
|
|
[218]
|
Generation of nylon copolymer reinforced with carbon nanotubes and thermotropic liquid crystalline polymers for use in fused filament fabrication
Polymer Composites,
2021
DOI:10.1002/pc.26151
|
|
|
|
|
[219]
|
Batch production and fused filament fabrication of highly aligned discontinuous fibre thermoplastic filaments
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.102359
|
|
|
|
|
[220]
|
Multi-scale analysis for 3D printed continuous fiber reinforced thermoplastic composites
Composites Science and Technology,
2021
DOI:10.1016/j.compscitech.2021.109065
|
|
|
|
|
[221]
|
Mechanical properties for long fibre reinforced fused deposition manufactured composites
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108657
|
|
|
|
|
[222]
|
Interfacial adhesion quality in 3D printed continuous CF/PA6 composites at filament/matrix and interlaminar scales
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108891
|
|
|
|
|
[223]
|
Post-processing effects on microstructure, interlaminar and thermal properties of 3D printed continuous carbon fibre composites
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108652
|
|
|
|
|
[224]
|
Influence of Process Parameters on the Properties of Additively Manufactured Fiber-Reinforced Polymer Composite Materials: A Review
Journal of Materials Engineering and Performance,
2021
DOI:10.1007/s11665-021-05832-y
|
|
|
|
|
[225]
|
Simultaneous reinforcement of both rigidity and energy absorption of polyamide-based composites with hybrid continuous fibers by 3D printing
Composite Structures,
2021
DOI:10.1016/j.compstruct.2021.113854
|
|
|
|
|
[226]
|
3D printed recoverable honeycomb composites reinforced by continuous carbon fibers
Composite Structures,
2021
DOI:10.1016/j.compstruct.2021.113974
|
|
|
|
|
[227]
|
An isogeometric framework for the modeling of curvilinear anisotropic media
Composite Structures,
2021
DOI:10.1016/j.compstruct.2021.113771
|
|
|
|
|
[228]
|
Reinforcing in the lay-up direction with self-heating for carbon fiber composites fabricated using a fused filament fabrication 3D printer
Composite Structures,
2021
DOI:10.1016/j.compstruct.2021.113815
|
|
|
|
|
[229]
|
Multi-scale analysis for 3D printed continuous fiber reinforced thermoplastic composites
Composites Science and Technology,
2021
DOI:10.1016/j.compscitech.2021.109065
|
|
|
|
|
[230]
|
Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review
Applied Composite Materials,
2021
DOI:10.1007/s10443-021-09933-8
|
|
|
|
|
[231]
|
Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108671
|
|
|
|
|
[232]
|
Material extrusion additive manufacturing of continuous fibre reinforced polymer matrix composites: A review and outlook
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.109143
|
|
|
|
|
[233]
|
Annealing of chopped and continuous fibre reinforced polyamide 6 produced by fused filament fabrication
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.109119
|
|
|
|
|
[234]
|
Charpy impact energy absorption of 3D printed continuous Kevlar reinforced composites
Journal of Composite Materials,
2021
DOI:10.1177/0021998320985596
|
|
|
|
|
[235]
|
Additive Manufacturing of Polymer Matrix Composite Materials with Aligned or Organized Filler Material: A Review
Advanced Engineering Materials,
2021
DOI:10.1002/adem.202001002
|
|
|
|
|
[236]
|
Progress in MgCl2 supported Ziegler-Natta catalyzed polyolefin products and applications
Journal of Polymer Research,
2021
DOI:10.1007/s10965-021-02412-5
|
|
|
|
|
[237]
|
Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review
Journal of Composites Science,
2021
DOI:10.3390/jcs5010029
|
|
|
|
|
[238]
|
Numerical modelling of the elastic properties of 3D-printed specimens of thermoplastic matrix reinforced with continuous fibres
Composites Part B: Engineering,
2021
DOI:10.1016/j.compositesb.2021.108671
|
|
|
|
|
[239]
|
VOLCO-X: numerical simulation of material distribution and voids in extrusion additive manufacturing
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.101900
|
|
|
|
|
[240]
|
Bioactive materials for 3D printing: A review
PROCEEDINGS OF THE 14TH ASIA-PACIFIC PHYSICS CONFERENCE,
2021
DOI:10.1063/5.0036113
|
|
|
|
|
[241]
|
Calculating printing speed in order to correctly print PLA/continuous glass fiber composites via fused filament fabrication 3D printer
Journal of Thermoplastic Composite Materials,
2021
DOI:10.1177/0892705721997534
|
|
|
|
|
[242]
|
Leveraging the Advantages of Additive Manufacturing to Produce Advanced Hybrid Composite Structures for Marine Energy Systems
Applied Sciences,
2021
DOI:10.3390/app11031336
|
|
|
|
|
[243]
|
A Finite Element approach for the prediction of the mechanical behaviour of layered composites produced by Continuous Filament Fabrication (CFF)
Polymer Testing,
2021
DOI:10.1016/j.polymertesting.2021.107181
|
|
|
|
|
[244]
|
Technologies for economic and functional lightweight design
Zukunftstechnologien für den multifunktionalen Leichtbau,
2021
DOI:10.1007/978-3-662-62924-6_11
|
|
|
|
|
[245]
|
Thermotropic liquid crystalline polymer reinforced polyamide composite for fused filament fabrication
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.101931
|
|
|
|
|
[246]
|
Applied Technologies
Communications in Computer and Information Science,
2021
DOI:10.1007/978-3-030-71503-8_17
|
|
|
|
|
[247]
|
Simultaneous reinforcement of both rigidity and energy absorption of polyamide-based composites with hybrid continuous fibers by 3D printing
Composite Structures,
2021
DOI:10.1016/j.compstruct.2021.113854
|
|
|
|
|
[248]
|
3D printing of a continuous fiber-reinforced composite based on a coaxial Kevlar/PLA filament
Composites and Advanced Materials,
2021
DOI:10.1177/26349833211000058
|
|
|
|
|
[249]
|
The technology of continuous fibre-reinforced polymers: a review on extrusion additive manufacturing methods
The International Journal of Advanced Manufacturing Technology,
2021
DOI:10.1007/s00170-021-06837-6
|
|
|
|
|
[250]
|
Rotating Bending Fatigue Analysis of Printed Specimens from Assorted Polymer Materials
Polymers,
2021
DOI:10.3390/polym13071020
|
|
|
|
|
[251]
|
Mechanical characterization of additively manufactured fiber-reinforced composites
Aerospace Science and Technology,
2021
DOI:10.1016/j.ast.2021.106653
|
|
|
|
|
[252]
|
3D printed recoverable honeycomb composites reinforced by continuous carbon fibers
Composite Structures,
2021
DOI:10.1016/j.compstruct.2021.113974
|
|
|
|
|
[253]
|
Development and Processing of Continuous Flax and Carbon Fiber-Reinforced Thermoplastic Composites by a Modified Material Extrusion Process
Materials,
2021
DOI:10.3390/ma14092332
|
|
|
|
|
[254]
|
Fused Deposition Modeling Based 3D Printing
Materials Forming, Machining and Tribology,
2021
DOI:10.1007/978-3-030-68024-4_8
|
|
|
|
|
[255]
|
Composite Materials
2021
DOI:10.1016/B978-0-12-820512-9.00013-7
|
|
|
|
|
[256]
|
Preparation of Nano Hydroxyapatite/Polyamide Composite and Its Application in Lumbar Disc Herniation Operation
Science of Advanced Materials,
2021
DOI:10.1166/sam.2021.3916
|
|
|
|
|
[257]
|
Linear translaminar fracture characterization of additive manufactured continuous carbon fiber reinforced thermoplastic
Journal of Thermoplastic Composite Materials,
2021
DOI:10.1177/08927057211021462
|
|
|
|
|
[258]
|
Tensile Performance of 3D-Printed Continuous Fiber-Reinforced Nylon Composites
Journal of Manufacturing and Materials Processing,
2021
DOI:10.3390/jmmp5030068
|
|
|
|
|
[259]
|
Analysis of the Influencing Factors of FDM-Supported Positions for the Compressive Strength of Printing Components
Materials,
2021
DOI:10.3390/ma14144008
|
|
|
|
|
[260]
|
Advanced Configuration Parameters of Post Processor Influencing Tensile Testing PLA and Add-Mixtures in Polymer Matrix in the Process of FDM Technology
Applied Sciences,
2021
DOI:10.3390/app11136212
|
|
|
|
|
[261]
|
A Review on Filament Materials for Fused Filament Fabrication
Journal of Manufacturing and Materials Processing,
2021
DOI:10.3390/jmmp5030069
|
|
|
|
|
[262]
|
Linear model analysis of fused deposition modeling process parameters for obtaining the maximum tensile strength in acrylonitrile butadiene styrene (ABS) and carbon fiber polylactic acid (PLA) materials
Multidiscipline Modeling in Materials and Structures,
2021
DOI:10.1108/MMMS-09-2020-0239
|
|
|
|
|
[263]
|
Mechanism based failure of 3D-printed continuous carbon fiber reinforced thermoplastic composites
Composites Science and Technology,
2021
DOI:10.1016/j.compscitech.2021.108962
|
|
|
|
|
[264]
|
Thermotropic liquid crystalline polymer reinforced polypropylene composites enhanced with carbon nanotubes for use in fused filament fabrication
Polymer Composites,
2021
DOI:10.1002/pc.26134
|
|
|
|
|
[265]
|
3D printing of continuous fiber-reinforced thermoset composites
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.101921
|
|
|
|
|
[266]
|
Study on mechanical performance of 3D printed composite material with topology shape using finite element method
Functional Composites and Structures,
2021
DOI:10.1088/2631-6331/ac1914
|
|
|
|
|
[267]
|
A novel use of twisted continuous carbon fibers in additive manufacturing of composites
Materials Today: Proceedings,
2021
DOI:10.1016/j.matpr.2020.07.665
|
|
|
|
|
[268]
|
An isogeometric framework for the modeling of curvilinear anisotropic media
Composite Structures,
2021
DOI:10.1016/j.compstruct.2021.113771
|
|
|
|
|
[269]
|
Reinforcing in the lay-up direction with self-heating for carbon fiber composites fabricated using a fused filament fabrication 3D printer
Composite Structures,
2021
DOI:10.1016/j.compstruct.2021.113815
|
|
|
|
|
[270]
|
Study of the Residual Length of Discrete Carbon Fibers in Polyetherimide Based Composites for 3D-Printing
Key Engineering Materials,
2021
DOI:10.4028/www.scientific.net/KEM.899.309
|
|
|
|
|
[271]
|
The mechanical performance of the 3D printed composites produced with continuous carbon fiber reinforced filaments obtained via melt impregnation
Additive Manufacturing,
2021
DOI:10.1016/j.addma.2021.102112
|
|
|
|
|
[272]
|
3D-printed resistive carbon-fiber-reinforced sensors for monitoring the resin frontal flow during composite manufacturing
Sensors and Actuators A: Physical,
2021
DOI:10.1016/j.sna.2020.112422
|
|
|
|
|
[273]
|
Interfacial Transcrystallization and Mechanical Performance of 3D-Printed Fully Recyclable Continuous Fiber Self-Reinforced Composites
Polymers,
2021
DOI:10.3390/polym13183176
|
|
|
|
|
[274]
|
Preparation of Continuous Glass Fiber Reinforced Polylactic Acid by Means of a Melt Impregnation Method and Application as a 3D Printing Consumable
ChemistrySelect,
2021
DOI:10.1002/slct.202102790
|
|
|
|
|
[275]
|
3D printed carbon fiber reinforced thermoplastic composites: A review
Materials Today: Proceedings,
2021
DOI:10.1016/j.matpr.2020.12.609
|
|
|
|
|
[276]
|
Process evaluation, tensile properties, mathematical models, and fracture behavior of 3D printed continuous fiber reinforced thermoplastic composites
Journal of Reinforced Plastics and Composites,
2021
DOI:10.1177/07316844211016091
|
|
|
|
|
[277]
|
A novel printing strategy in additive manufacturing of continuous carbon fiber reinforced plastic composites
Manufacturing Letters,
2021
DOI:10.1016/j.mfglet.2020.12.006
|
|
|
|
|
[278]
|
Compressive strength degradation of the curved sections of 3D-printed continuous carbon fiber composite
Composites Part A: Applied Science and Manufacturing,
2021
DOI:10.1016/j.compositesa.2020.106244
|
|
|
|
|
[279]
|
Micromechanical models for predicting the mechanical properties of 3D-printed wood/PLA composite materials: A comparison with experimental data
Mechanics of Advanced Materials and Structures,
2021
DOI:10.1080/15376494.2021.1983901
|
|
|
|
|
[280]
|
3D printed PCL scaffold reinforced with continuous biodegradable fiber yarn: A study on mechanical and cell viability properties
Polymer Testing,
2020
DOI:10.1016/j.polymertesting.2020.106347
|
|
|
|
|
[281]
|
A novel generalized stress invariant-based strength model for inter-layer failure of FFF 3D printing PLA material
Materials & Design,
2020
DOI:10.1016/j.matdes.2020.108799
|
|
|
|
|
[282]
|
Micromechanical analysis of the tensile deformation behavior for 3D printed unidirectional continuous fiber reinforced thermos-plastic composites
Journal of Mechanical Science and Technology,
2020
DOI:10.1007/s12206-020-1112-5
|
|
|
|
|
[283]
|
Optimal design and manufacture of variable stiffness laminated continuous fiber reinforced composites
Scientific Reports,
2020
DOI:10.1038/s41598-020-73333-4
|
|
|
|
|
[284]
|
The Mechanical Properties of Fiber Metal Laminates Based on 3D Printed Composites
Materials,
2020
DOI:10.3390/ma13225264
|
|
|
|
|
[285]
|
A Review Study on Mechanical Properties of Obtained Products by FDM Method and Metal/Polymer Composite Filament Production
Journal of Nanomaterials,
2020
DOI:10.1155/2020/6187149
|
|
|
|
|
[286]
|
Kompozit eklemeli imalat için polimer matrisli sürekli fiber takviyeli kompozit parça üretilebilirliğinin araştırılması
Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi,
2020
DOI:10.17341/gazimmfd.606618
|
|
|
|
|
[287]
|
Reverse piezo-resistivity of 3D printed continuous carbon fiber/PA6 composites in a low stress range
Advanced Composite Materials,
2020
DOI:10.1080/09243046.2020.1848314
|
|
|
|
|
[288]
|
Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing
Materials and Manufacturing Processes,
2020
DOI:10.1080/10426914.2020.1843664
|
|
|
|
|
[289]
|
Experimental investigation and statistical analysis of additively manufactured onyx‐carbon fiber reinforced composites
Journal of Applied Polymer Science,
2020
DOI:10.1002/app.50338
|
|
|
|
|
[290]
|
A review on 3D printed matrix polymer composites: its potential and future challenges
The International Journal of Advanced Manufacturing Technology,
2020
DOI:10.1007/s00170-019-04534-z
|
|
|
|
|
[291]
|
Enhanced mechanical properties of 3D printed graphene-polymer composite lattices at very low graphene concentrations
Composites Part A: Applied Science and Manufacturing,
2020
DOI:10.1016/j.compositesa.2019.105726
|
|
|
|
|
[292]
|
Handbook of Research on Recent Developments in Electrical and Mechanical Engineering
Advances in Computer and Electrical Engineering,
2020
DOI:10.4018/978-1-7998-0117-7.ch017
|
|
|
|
|
[293]
|
3D printing of optimized composites with variable fiber volume fraction and stiffness using continuous fiber
Composites Science and Technology,
2020
DOI:10.1016/j.compscitech.2019.107905
|
|
|
|
|
[294]
|
Similarity law for two-dimensional propagation behavior of ultrasonic wave in concentrically curved fiber CFRP
Composite Structures,
2020
DOI:10.1016/j.compstruct.2019.111714
|
|
|
|
|
[295]
|
Additively manufactured carbon fiber-reinforced composites: State of the art and perspective
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2019.100962
|
|
|
|
|
[296]
|
Investigating the Hot Isostatic Pressing of an Additively Manufactured Continuous Carbon Fiber Reinforced PEEK Composite
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101634
|
|
|
|
|
[297]
|
Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing
Machines,
2020
DOI:10.3390/machines8030052
|
|
|
|
|
[298]
|
3D Printing of Fibre-Reinforced Thermoplastic Composites Using Fused Filament Fabrication—A Review
Polymers,
2020
DOI:10.3390/polym12102188
|
|
|
|
|
[299]
|
Evaluating the effect of variable fiber content on mechanical properties of additively manufactured continuous carbon fiber composites
Journal of Reinforced Plastics and Composites,
2020
DOI:10.1177/0731684420963217
|
|
|
|
|
[300]
|
Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites
Materials,
2020
DOI:10.3390/ma13173850
|
|
|
|
|
[301]
|
Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters
Composites Part B: Engineering,
2020
DOI:10.1016/j.compositesb.2020.108474
|
|
|
|
|
[302]
|
Fiber–matrix impregnation behavior during additive manufacturing of continuous carbon fiber reinforced polylactic acid composites
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101661
|
|
|
|
|
[303]
|
Advances in Lightweight Materials and Structures
Springer Proceedings in Materials,
2020
DOI:10.1007/978-981-15-7827-4_64
|
|
|
|
|
[304]
|
Long-fibre reinforced polymer composites by 3D printing: influence of nature of reinforcement and processing parameters on mechanical performance
Functional Composite Materials,
2020
DOI:10.1186/s42252-020-00010-0
|
|
|
|
|
[305]
|
High-pressure interfacial impregnation by micro-screw in-situ extrusion for 3D printed continuous carbon fiber reinforced nylon composites
Composites Part A: Applied Science and Manufacturing,
2020
DOI:10.1016/j.compositesa.2020.105770
|
|
|
|
|
[306]
|
A mechanistic model for tensile property of continuous carbon fiber reinforced plastic composites built by fused filament fabrication
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101102
|
|
|
|
|
[307]
|
Open hole tensile testing of 3D printed continuous carbon fiber reinforced composites
Journal of Composite Materials,
2020
DOI:10.1177/0021998320902510
|
|
|
|
|
[308]
|
Progressive damage simulation for a 3D-printed curvilinear continuous carbon fiber-reinforced thermoplastic based on continuum damage mechanics
Advanced Composite Materials,
2020
DOI:10.1080/09243046.2020.1724430
|
|
|
|
|
[309]
|
Additive manufacturing of short fiber reinforced thermoset composites with unprecedented mechanical performance
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101109
|
|
|
|
|
[310]
|
3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
Composites Science and Technology,
2020
DOI:10.1016/j.compscitech.2020.108077
|
|
|
|
|
[311]
|
Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101184
|
|
|
|
|
[312]
|
Advanced Intelligent Systems for Sustainable Development (AI2SD’2019)
Advances in Intelligent Systems and Computing,
2020
DOI:10.1007/978-3-030-36671-1_29
|
|
|
|
|
[313]
|
Tensile performance of additively manufactured short carbon fibre-PLA composites: neural networking and GA for prediction and optimisation
Plastics, Rubber and Composites,
2020
DOI:10.1080/14658011.2020.1744371
|
|
|
|
|
[314]
|
Multi‐Material 3D and 4D Printing: A Survey
Advanced Science,
2020
DOI:10.1002/advs.201902307
|
|
|
|
|
[315]
|
The Use of Composite Materials in 3D Printing
Journal of Composites Science,
2020
DOI:10.3390/jcs4020042
|
|
|
|
|
[316]
|
Expanding Puck and Schürmann Inter Fiber Fracture Criterion for Fiber Reinforced Thermoplastic 3D-Printed Composite Materials
Materials,
2020
DOI:10.3390/ma13071653
|
|
|
|
|
[317]
|
Additive Manufacturing Hybrid Processes for Composites Systems
Advanced Structured Materials,
2020
DOI:10.1007/978-3-030-44522-5_1
|
|
|
|
|
[318]
|
Mechanical and Thermo-mechanical Properties of Carbon fiber Reinforced Thermoplastic Composite Fabricated Using Fused Deposition Modeling Method
Materials Today: Proceedings,
2020
DOI:10.1016/j.matpr.2020.03.012
|
|
|
|
|
[319]
|
Dynamic Capillary-Driven Additive Manufacturing of Continuous Carbon Fiber Composite
Matter,
2020
DOI:10.1016/j.matt.2020.04.010
|
|
|
|
|
[320]
|
Structure and Properties of Additive Manufactured Polymer Components
2020
DOI:10.1016/B978-0-12-819535-2.00011-9
|
|
|
|
|
[321]
|
Structure and Properties of Additive Manufactured Polymer Components
2020
DOI:10.1016/B978-0-12-819535-2.00012-0
|
|
|
|
|
[322]
|
Advances in Materials Processing
Lecture Notes in Mechanical Engineering,
2020
DOI:10.1007/978-981-15-4748-5_22
|
|
|
|
|
[323]
|
Review on process model, structure-property relationship of composites and future needs in fused filament fabrication
Journal of Reinforced Plastics and Composites,
2020
DOI:10.1177/0731684420929757
|
|
|
|
|
[324]
|
Fabrication of continuous glass fiber-reinforced dual-cure epoxy composites via UV-assisted fused deposition modeling
Composites Communications,
2020
DOI:10.1016/j.coco.2020.100401
|
|
|
|
|
[325]
|
A multi-scale analytical methodology for the prediction of mechanical properties of 3D-printed materials with continuous fibres
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101394
|
|
|
|
|
[326]
|
3D-Printed Carbon Fiber Reinforced Polymer Composites: A Systematic Review
Journal of Composites Science,
2020
DOI:10.3390/jcs4030098
|
|
|
|
|
[327]
|
Smart Manufacturing Process of Carbon-Based Low-Dimensional Structures and Fiber-Reinforced Polymer Composites for Engineering Applications
Journal of Materials Engineering and Performance,
2020
DOI:10.1007/s11665-020-04950-3
|
|
|
|
|
[328]
|
Hybrid Manufacturing and Mechanical Characterization of Cu/PLA Composites
Arabian Journal for Science and Engineering,
2020
DOI:10.1007/s13369-020-04778-y
|
|
|
|
|
[329]
|
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
Polymers,
2020
DOI:10.3390/polym12071529
|
|
|
|
|
[330]
|
Recent Progress on Polymer Materials for Additive Manufacturing
Advanced Functional Materials,
2020
DOI:10.1002/adfm.202003062
|
|
|
|
|
[331]
|
Optimal design and manufacture of variable stiffness laminated continuous fiber reinforced composites
Scientific Reports,
2020
DOI:10.1038/s41598-020-73333-4
|
|
|
|
|
[332]
|
An approach to analyse the factors behind the micromechanical response of 3D-printed composites
Composites Part B: Engineering,
2020
DOI:10.1016/j.compositesb.2020.107820
|
|
|
|
|
[333]
|
An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,
2020
DOI:10.1177/0954405419843780
|
|
|
|
|
[334]
|
Moisture effect on the mechanical properties of additively manufactured continuous carbon fiber‐reinforced Nylon‐based thermoplastic
Polymer Composites,
2020
DOI:10.1002/pc.25789
|
|
|
|
|
[335]
|
Design, Analysis and Development of composite matrix material upright of FSAE vehicle
IOP Conference Series: Materials Science and Engineering,
2020
DOI:10.1088/1757-899X/912/2/022050
|
|
|
|
|
[336]
|
Fatigue Life Prediction of Composites and Composite Structures
2020
DOI:10.1016/B978-0-08-102575-8.00009-7
|
|
|
|
|
[337]
|
Static and fatigue behaviour of continuous fibre reinforced thermoplastic composites manufactured by fused deposition modelling technique
International Journal of Fatigue,
2020
DOI:10.1016/j.ijfatigue.2019.105275
|
|
|
|
|
[338]
|
A review of 3D and 4D printing of natural fibre biocomposites
Materials & Design,
2020
DOI:10.1016/j.matdes.2020.108911
|
|
|
|
|
[339]
|
A review of 3D and 4D printing of natural fibre biocomposites
Materials & Design,
2020
DOI:10.1016/j.matdes.2020.108911
|
|
|
|
|
[340]
|
A multi-scale analytical methodology for the prediction of mechanical properties of 3D-printed materials with continuous fibres
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101394
|
|
|
|
|
[341]
|
Enhancing the mechanical performance of 3D‐printed basalt fiber‐reinforced composites using in‐line atmospheric plasma pretreatments
Plasma Processes and Polymers,
2020
DOI:10.1002/ppap.201900143
|
|
|
|
|
[342]
|
Recent Progress on Polymer Materials for Additive Manufacturing
Advanced Functional Materials,
2020
DOI:10.1002/adfm.202003062
|
|
|
|
|
[343]
|
Multi‐Material 3D and 4D Printing: A Survey
Advanced Science,
2020
DOI:10.1002/advs.201902307
|
|
|
|
|
[344]
|
Kompozit eklemeli imalat için polimer matrisli sürekli fiber takviyeli kompozit parça üretilebilirliğinin araştırılması
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi,
2020
DOI:10.17341/gazimmfd.606618
|
|
|
|
|
[345]
|
A multi-scale analytical methodology for the prediction of mechanical properties of 3D-printed materials with continuous fibres
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101394
|
|
|
|
|
[346]
|
Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101184
|
|
|
|
|
[347]
|
Additive manufacturing of short fiber reinforced thermoset composites with unprecedented mechanical performance
Additive Manufacturing,
2020
DOI:10.1016/j.addma.2020.101109
|
|
|
|
|
[348]
|
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Advanced Materials Technologies,
2019
DOI:10.1002/admt.201800271
|
|
|
|
|
[349]
|
First printing of continuous fibers into ceramics
Journal of the American Ceramic Society,
2019
DOI:10.1111/jace.16234
|
|
|
|
|
[350]
|
Low‐pressure additive manufacturing of continuous fiber‐reinforced polymer composites
Polymer Composites,
2019
DOI:10.1002/pc.25294
|
|
|
|
|
[351]
|
Compressive Properties of 3D Printed Polylactic Acid Matrix Composites Reinforced by Short Fibers and SiC Nanowires
Advanced Engineering Materials,
2019
DOI:10.1002/adem.201800539
|
|
|
|
|
[352]
|
Flexural properties of three-dimensional printed continuous wire polymer composites
Materials Science and Technology,
2019
DOI:10.1080/02670836.2019.1630085
|
|
|
|
|
[353]
|
Evaluation of One-Staged 3-D Printed Frequency Selective Surface Using Carbon-Fiber-Reinforced Thermoplastic Composite
IEEE Transactions on Components, Packaging and Manufacturing Technology,
2019
DOI:10.1109/TCPMT.2019.2917197
|
|
|
|
|
[354]
|
Strength analysis of 3D printed carbon fibre reinforced thermoplastic using experimental and numerical methods
IOP Conference Series: Materials Science and Engineering,
2019
DOI:10.1088/1757-899X/700/1/012024
|
|
|
|
|
[355]
|
Mechanical properties of carbon and glass fibre reinforced composites produced by additive manufacturing: A short review
IOP Conference Series: Materials Science and Engineering,
2019
DOI:10.1088/1757-899X/670/1/012020
|
|
|
|
|
[356]
|
Tensile-test-Property Evaluations of 3D Printed Continuous Carbon Fiber Reinforced Thermoplastic Composites
Journal of the Japan Society for Composite Materials,
2019
DOI:10.6089/jscm.45.141
|
|
|
|
|
[357]
|
Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by additive manufacturing
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2018.12.020
|
|
|
|
|
[358]
|
The trends and challenges of fiber reinforced additive manufacturing
The International Journal of Advanced Manufacturing Technology,
2019
DOI:10.1007/s00170-018-03269-7
|
|
|
|
|
[359]
|
Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2019.01.005
|
|
|
|
|
[360]
|
Enhancing the bearing strength of woven carbon fibre thermoplastic composites through additive manufacturing
Composite Structures,
2019
DOI:10.1016/j.compstruct.2019.01.050
|
|
|
|
|
[361]
|
Mechanical characterization and asymptotic homogenization of 3D-printed continuous carbon fiber-reinforced thermoplastic
Journal of the Brazilian Society of Mechanical Sciences and Engineering,
2019
DOI:10.1007/s40430-019-1630-1
|
|
|
|
|
[362]
|
Galvanically Stimulated Degradation of Carbon-Fiber Reinforced Polymer Composites: A Critical Review
Materials,
2019
DOI:10.3390/ma12040651
|
|
|
|
|
[363]
|
In-situ characterization of 3D printed continuous fiber reinforced composites: A methodological study using fiber Bragg grating sensors
Composites Science and Technology,
2019
DOI:10.1016/j.compscitech.2019.02.008
|
|
|
|
|
[364]
|
Characterizations of continuous carbon fiber-reinforced composites for electromagnetic interference shielding fabricated by 3D printing
Applied Physics A,
2019
DOI:10.1007/s00339-019-2566-0
|
|
|
|
|
[365]
|
Influence of mixed isotropic fiber angles and hot press on the mechanical properties of 3D printed composites
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2019.03.008
|
|
|
|
|
[366]
|
Tailoring strength and modulus by 3D printing different continuous fibers and filled structures into composites
Advanced Composites and Hybrid Materials,
2019
DOI:10.1007/s42114-019-00087-7
|
|
|
|
|
[367]
|
Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches
Materials,
2019
DOI:10.3390/ma12060895
|
|
|
|
|
[368]
|
Design Optimization and FE Analysis of 3D Printed Carbon PEEK Based Mono Leaf Spring
Micromachines,
2019
DOI:10.3390/mi10050279
|
|
|
|
|
[369]
|
Progression to the next industrial revolution: Industry 4.0 for composites
Reinforced Plastics,
2019
DOI:10.1016/j.repl.2019.04.001
|
|
|
|
|
[370]
|
A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites
Materials,
2019
DOI:10.3390/ma12091369
|
|
|
|
|
[371]
|
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Composites Part B: Engineering,
2019
DOI:10.1016/j.compositesb.2019.106956
|
|
|
|
|
[372]
|
Low‐pressure additive manufacturing of continuous fiber‐reinforced polymer composites
Polymer Composites,
2019
DOI:10.1002/pc.25294
|
|
|
|
|
[373]
|
3D printing of high density polyethylene by fused filament fabrication
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2019.05.003
|
|
|
|
|
[374]
|
Additive Manufacturing of PLA-Based Composites Using Fused Filament Fabrication: Effect of Graphene Nanoplatelet Reinforcement on Mechanical Properties, Dimensional Accuracy and Texture
Polymers,
2019
DOI:10.3390/polym11050799
|
|
|
|
|
[375]
|
Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments
Materials,
2019
DOI:10.3390/ma12101664
|
|
|
|
|
[376]
|
3D printing of continuous flax fibre reinforced biocomposites for structural applications
Materials & Design,
2019
DOI:10.1016/j.matdes.2019.107884
|
|
|
|
|
[377]
|
Recent Patents in Additive Manufacturing of Continuous Fiber Reinforced Composites
Recent Patents on Mechanical Engineering,
2019
DOI:10.2174/2212797612666190117131659
|
|
|
|
|
[378]
|
Flexural properties of three-dimensional printed continuous wire polymer composites
Materials Science and Technology,
2019
DOI:10.1080/02670836.2019.1630085
|
|
|
|
|
[379]
|
Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
Composites Science and Technology,
2019
DOI:10.1016/j.compscitech.2019.107688
|
|
|
|
|
[380]
|
3D printed fiber reinforced polymer composites - Structural analysis
Composites Part B: Engineering,
2019
DOI:10.1016/j.compositesb.2019.107112
|
|
|
|
|
[381]
|
Three-dimensional printing of continuous carbon fiber-reinforced shape memory polymer composites
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019,
2019
DOI:10.1063/1.5112513
|
|
|
|
|
[382]
|
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
Composites Part B: Engineering,
2019
DOI:10.1016/j.compositesb.2019.107147
|
|
|
|
|
[383]
|
Application of thermotropic liquid crystalline polymer reinforced acrylonitrile butadiene styrene in fused filament fabrication
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2019.100813
|
|
|
|
|
[384]
|
Generation of Polyphenylene Sulfide Reinforced with a Thermotropic Liquid Crystalline Polymer for Application in Fused Filament Fabrication
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2019.100814
|
|
|
|
|
[385]
|
A review on fibre reinforced composite printing via FFF
Rapid Prototyping Journal,
2019
DOI:10.1108/RPJ-01-2019-0004
|
|
|
|
|
[386]
|
Tensile property evaluations of 3D printed continuous carbon fiber reinforced thermoplastic composites
Advanced Composite Materials,
2019
DOI:10.1080/09243046.2019.1650323
|
|
|
|
|
[387]
|
An insight into additive manufacturing of fiber reinforced polymer composite
International Journal of Lightweight Materials and Manufacture,
2019
DOI:10.1016/j.ijlmm.2019.08.004
|
|
|
|
|
[388]
|
EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization
2019
DOI:10.1007/978-3-319-97773-7_94
|
|
|
|
|
[389]
|
Single step 3D printing of bioinspired structures via metal reinforced thermoplastic and highly stretchable elastomer
Composite Structures,
2019
DOI:10.1016/j.compstruct.2018.11.019
|
|
|
|
|
[390]
|
Exploration of the design freedom of 3D printed continuous fibre-reinforced polymers in open-hole tensile strength tests
Composites Science and Technology,
2019
DOI:10.1016/j.compscitech.2018.12.021
|
|
|
|
|
[391]
|
3D printed polycarbonate reinforced acrylonitrile–butadiene–styrene composites: Composition effects on mechanical properties, micro-structure and void formation study
Journal of Mechanical Science and Technology,
2019
DOI:10.1007/s12206-019-1011-9
|
|
|
|
|
[392]
|
Polymer-Based Additive Manufacturing
2019
DOI:10.1007/978-3-030-24532-0_2
|
|
|
|
|
[393]
|
A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties
Composite Structures,
2019
DOI:10.1016/j.compstruct.2019.111476
|
|
|
|
|
[394]
|
Ultrasound-assisted 3D printing of continuous fiber-reinforced thermoplastic (FRTP) composites
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2019.100926
|
|
|
|
|
[395]
|
Ply and interlaminar behaviours of 3D printed continuous carbon fibre-reinforced thermoplastic laminates; effects of processing conditions and microstructure
Additive Manufacturing,
2019
DOI:10.1016/j.addma.2019.100884
|
|
|
|
|
[396]
|
Mechanism of folding a fiber bundle in the curved section of 3D printed carbon fiber reinforced plastics
Advanced Composite Materials,
2019
DOI:10.1080/09243046.2019.1682794
|
|
|
|
|
[397]
|
Composite Reinforcement Architectures: A Review of Field-Assisted Additive Manufacturing for Polymers
Journal of Composites Science,
2019
DOI:10.3390/jcs4010001
|
|
|
|
|
[398]
|
Enhancing the mechanical performance of 3D‐printed basalt fiber‐reinforced composites using in‐line atmospheric plasma pretreatments
Plasma Processes and Polymers,
2019
DOI:10.1002/ppap.201900143
|
|
|
|
|
[399]
|
A Sensitivity Analysis-Based Parameter Optimization Framework for 3D Printing of Continuous Carbon Fiber/Epoxy Composites
Materials,
2019
DOI:10.3390/ma12233961
|
|
|
|
|
[400]
|
Cutting Edge of Molding Techniques of Composite Materials
Journal of the Society of Materials Science, Japan,
2018
DOI:10.2472/jsms.67.888
|
|
|
|
|
[401]
|
Polymer Composite Manufacturing by FDM 3D Printing Technology
MATEC Web of Conferences,
2018
DOI:10.1051/matecconf/201823702006
|
|
|
|
|
[402]
|
Fracture toughness enhancement of carbon fiber–reinforced polymer composites utilizing additive manufacturing fabrication
Journal of Elastomers & Plastics,
2018
DOI:10.1177/0095244318817867
|
|
|
|
|
[403]
|
First printing of continuous fibers into ceramics
Journal of the American Ceramic Society,
2018
DOI:10.1111/jace.16234
|
|
|
|
|
[404]
|
Bending fracture rule for 3D-printed curved continuous-fiber composite
Advanced Composite Materials,
2018
DOI:10.1080/09243046.2018.1558327
|
|
|
|
|
[405]
|
Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites
Composites Part A: Applied Science and Manufacturing,
2018
DOI:10.1016/j.compositesa.2018.09.001
|
|
|
|
|
[406]
|
Enhanced Bonding via Additive Manufacturing-Enabled Surface Tailoring of 3D Printed Continuous-Fiber Composites
Advanced Engineering Materials,
2018
DOI:10.1002/adem.201800691
|
|
|
|
|
[407]
|
An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding
Mechanics of Advanced Materials and Structures,
2018
DOI:10.1080/15376494.2018.1516324
|
|
|
|
|
[408]
|
Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
Journal of Reinforced Plastics and Composites,
2018
DOI:10.1177/0731684418807300
|
|
|
|
|
[409]
|
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Advanced Materials Technologies,
2018
DOI:10.1002/admt.201800271
|
|
|
|
|
[410]
|
Compressive Properties of 3D Printed Polylactic Acid Matrix Composites Reinforced by Short Fibers and SiC Nanowires
Advanced Engineering Materials,
2018
DOI:10.1002/adem.201800539
|
|
|
|
|
[411]
|
A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures
Materials & Design,
2018
DOI:10.1016/j.matdes.2017.10.007
|
|
|
|
|
[412]
|
AddJoining: a novel additive manufacturing approach for layered metal-polymer hybrid structures
Materials Letters,
2018
DOI:10.1016/j.matlet.2018.01.021
|
|
|
|
|
[413]
|
Fused filament fabrication of fiber-reinforced polymers: A review
Additive Manufacturing,
2018
DOI:10.1016/j.addma.2018.01.002
|
|
|
|
|
[414]
|
3D Printing of Carbon Fiber Reinforced Plastics and their Applications
Materials Science Forum,
2018
DOI:10.4028/www.scientific.net/MSF.913.558
|
|
|
|
|
[415]
|
Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
Composites Part B: Engineering,
2018
DOI:10.1016/j.compositesb.2018.04.054
|
|
|
|
|
[416]
|
Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
Polymer Testing,
2018
DOI:10.1016/j.polymertesting.2018.04.038
|
|
|
|
|
[417]
|
Three-dimensionally printed designable joint for carbon fibre reinforced plastics
Advanced Composite Materials,
2018
DOI:10.1080/09243046.2018.1470894
|
|
|
|
|
[418]
|
Influence of process interruption on mechanical properties of material extrusion parts
Rapid Prototyping Journal,
2018
DOI:10.1108/RPJ-05-2017-0091
|
|
|
|
|
[419]
|
Performance-driven 3D printing of continuous curved carbon fibre reinforced polymer composites: A preliminary numerical study
Composites Part B: Engineering,
2018
DOI:10.1016/j.compositesb.2018.06.017
|
|
|
|
|
[420]
|
Microstructure and mechanical properties of three dimensional-printed continuous fiber composites
Journal of Composite Materials,
2018
DOI:10.1177/0021998318781938
|
|
|
|
|
[421]
|
Composite materials parts manufacturing
CIRP Annals,
2018
DOI:10.1016/j.cirp.2018.05.005
|
|
|
|
|
[422]
|
3D printing of composite sandwich structures using continuous carbon fiber and fiber tension
Composites Part A: Applied Science and Manufacturing,
2018
DOI:10.1016/j.compositesa.2018.07.029
|
|
|
|
|
[423]
|
Additive Manufacturing of Woven Carbon Fibre Polymer Composites
Composite Structures,
2018
DOI:10.1016/j.compstruct.2018.08.091
|
|
|
|
|
[424]
|
Exploration of specimen geometry and tab configuration for tensile testing exploiting the potential of 3D printing freeform shape continuous carbon fibre-reinforced nylon matrix composites
Polymer Testing,
2018
DOI:10.1016/j.polymertesting.2018.09.022
|
|
|
|
|
[425]
|
Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites
Polymer Testing,
2018
DOI:10.1016/j.polymertesting.2017.11.004
|
|
|
|
|
[426]
|
Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
Materials & Design,
2018
DOI:10.1016/j.matdes.2017.10.021
|
|
|
|
|
[427]
|
An evaluation of three different techniques for melt impregnation of glass fiber bundles with polyamide 12
Polymer Engineering & Science,
2018
DOI:10.1002/pen.24789
|
|
|
|
|
[428]
|
Enhanced Bonding via Additive Manufacturing‐Enabled Surface Tailoring of 3D Printed Continuous‐Fiber Composites
Advanced Engineering Materials,
2018
DOI:10.1002/adem.201800691
|
|
|
|
|
[429]
|
Additive manufacturing of woven carbon fibre polymer composites
Composite Structures,
2018
DOI:10.1016/j.compstruct.2018.08.091
|
|
|
|
|
[430]
|
An evaluation of three different techniques for melt impregnation of glass fiber bundles with polyamide 12
Polymer Engineering & Science,
2017
DOI:10.1002/pen.24789
|
|
|
|
|
[431]
|
3D printing of polymer matrix composites: A review and prospective
Composites Part B: Engineering,
2017
DOI:10.1016/j.compositesb.2016.11.034
|
|
|
|
|
[432]
|
Automated manufacturing and processing of fiber-reinforced polymer (FRP) composites: An additive review of contemporary and modern techniques for advanced materials manufacturing
Additive Manufacturing,
2017
DOI:10.1016/j.addma.2017.01.003
|
|
|
|
|
[433]
|
A new cost/weight trade-off method for airframe material decisions based on variable fuel price
Cogent Engineering,
2017
DOI:10.1080/23311916.2017.1285483
|
|
|
|
|
[434]
|
Additive manufacturing of thermoplastic matrix composites using fused deposition modeling: A comparison of two reinforcements
Journal of Composite Materials,
2017
DOI:10.1177/0021998317692659
|
|
|
|
|
[435]
|
Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
Journal of Composite Materials,
2017
DOI:10.1177/0021998316646169
|
|
|
|
|
[436]
|
Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers
Composites Part B: Engineering,
2017
DOI:10.1016/j.compositesb.2017.05.013
|
|
|
|
|
[437]
|
Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing
Additive Manufacturing,
2017
DOI:10.1016/j.addma.2017.06.004
|
|
|
|
|
[438]
|
Material Extrusion of Continuous Fiber Reinforced Plastics Using Commingled Yarn
Procedia CIRP,
2017
DOI:10.1016/j.procir.2017.03.367
|
|
|
|
|
[439]
|
Fabrication and mechanical characterization of continuous carbon fiber-reinforced thermoplastic using a preform by three-dimensional printing and via hot-press molding
Advanced Composite Materials,
2017
DOI:10.1080/09243046.2017.1368840
|
|
|
|
|
[440]
|
A review on additive manufacturing of polymer-fiber composites
Composite Structures,
2017
DOI:10.1016/j.compstruct.2017.08.088
|
|
|
|
|
[441]
|
Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication
Additive Manufacturing,
2017
DOI:10.1016/j.addma.2017.08.006
|
|
|
|
|
[442]
|
Resin molding by using electro-activated deposition for efficient manufacturing of carbon fiber reinforced plastic
Composite Structures,
2017
DOI:10.1016/j.compstruct.2017.09.064
|
|
|
|
|
[443]
|
A Particle Element Approach for Modelling the 3D Printing Process of Fibre Reinforced Polymer Composites
Journal of Manufacturing and Materials Processing,
2017
DOI:10.3390/jmmp1010010
|
|
|
|
|
[444]
|
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
Materials & Design,
2017
DOI:10.1016/j.matdes.2017.03.065
|
|
|
|
|
[445]
|
3D printing of fibre reinforced honeycomb structured composite materials
2016 23rd International Conference on Mechatronics and Machine Vision in Practice (M2VIP),
2016
DOI:10.1109/M2VIP.2016.7827341
|
|
|
|
|
[446]
|
Fiber Line Optimization in Single Ply for 3D Printed Composites
Open Journal of Composite Materials,
2016
DOI:10.4236/ojcm.2016.64012
|
|
|
|
|
[447]
|
Rapid.Tech – International Trade Show & Conference for Additive Manufacturing
2016
DOI:10.1007/978-3-446-45060-8_2
|
|
|
|