Experimental 3D Printed 4-Port Ventilator Manifold for Potential Use in Disaster Surges

Journals Menu

Follow SCIRP

ISSN Print: 2332-1806
ISSN Online: 2332-1814
www.scirp.org/journal/ojem
E-mail: ojem@scirp.org

"Experimental 3D Printed 4-Port Ventilator Manifold for Potential Use in Disaster Surges"
written by Richard Siderits, Gregory Neyman,
published by Open Journal of Emergency Medicine, Vol.2 No.3, 2014

has been cited by the following article(s):

[1]	A computational fluid dynamics assessment of 3D printed ventilator splitters and restrictors for differential multi-patient ventilation
	3D Printing in …, 2022

[2]	A Review on Biomedical and Mechanical Applications of 3D Printing
	Innovations in …, 2022

[3]	Novel additive manufacturing applications for communicable disease prevention and control: focus on recent COVID-19 pandemic
	2021

[4]	A low-cost portable mechanical ventilator—a conceptual design
	Advances in Engineering Design, 2021

[5]	pandemics [version 1; peer review: 1 approved]
	2020

[6]	A review of open source ventilators for COVID-19 and future pandemics
	2020

[7]	Impact of 3D printed medical equipment on the management of the Covid19 pandemic
	2020

[8]	Ventilator Manifold with Four Ports
	2020

[9]	3D-Printed Splitter for Use of a Single Ventilator on Multiple Patients During COVID-19
	2020

[1]	A computational fluid dynamics assessment of 3D printed ventilator splitters and restrictors for differential multi-patient ventilation 3D Printing in Medicine, 2022 DOI:10.1186/s41205-021-00129-1

[2]	Innovations in Mechanical Engineering Lecture Notes in Mechanical Engineering, 2022 DOI:10.1007/978-981-16-7282-8_24

[3]	Novel additive manufacturing applications for communicable disease prevention and control: focus on recent COVID-19 pandemic Emergent Materials, 2021 DOI:10.1007/s42247-021-00172-y

[4]	Advances in Engineering Design Lecture Notes in Mechanical Engineering, 2021 DOI:10.1007/978-981-33-4684-0_64

[5]	Impact of 3D printed medical equipment on the management of the Covid19 pandemic The International Journal of Health Planning and Management, 2020 DOI:10.1002/hpm.3009

[6]	A review of open source ventilators for COVID-19 and future pandemics F1000Research, 2020 DOI:10.12688/f1000research.22942.1

[7]	A review of open source ventilators for COVID-19 and future pandemics F1000Research, 2020 DOI:10.12688/f1000research.22942.2

[8]	3D-Printed Splitter for Use of a Single Ventilator on Multiple Patients During COVID-19 3D Printing and Additive Manufacturing, 2020 DOI:10.1089/3dp.2020.0102

[9]	Impact of 3D printed medical equipment on the management of the Covid19 pandemic The International Journal of Health Planning and Management, 2020 DOI:10.1002/hpm.3009

Follow SCIRP